POTENCIAL DA MADEIRA DE Pterogyne nitens Tul. (MADEIRA-NOVA) PARA PRODUÇÃO DE CARVÃO VEGETAL

The low diversity of forest tree species used in the formation of planted forests in Brazil, based mainly on Eucalyptus and Pinus genus, has led to study of alternative woods that show good productive potential. Thus, Pterogyne nitens species (madeira-nova), which shows good growth in Brazil's northeast region, it has aroused interest despite little research on their technological characteristics. The objective of this study was to analyze the potential of Pterogyne nitens wood for the charcoal production. Nine-year-old timbers were harvested in Vitoria da Conquista town, Bahia state. The woods were fragmented and carbonized in a muffle furnace with electric heating and final temperatures of 300°C, 450°C and, 600°C. Analysis were performed of carbonization process (yield in charcoal, condensable gases and non-condensable gases), apparent density (0% moisture), friability, superior heating power and, immediate chemistry of charcoal. Based on the results, it could be concluded that the fixed carbon and superior heating value of produced charcoal increased with the increasing of the final carbonization temperature. On the other hand, the increasing of the final carbonization temperature caused a reduction in the content of volatile materials and charcoal yield. The yield of non-condensable gases and friability of charcoal increased with the elevation of final carbonization temperatures from 300oC to 450oC, remaining constant to higher temperatures. Finally, the final carbonization temperature of 450°C was considered optimal for carbonization of that studied wood.

[1]  Ana Flávia Neves Mendes Castro,et al.  INFLUÊNCIA DAS PROPRIEDADES QUÍMICAS E DA RELAÇÃO SIRINGIL/GUAIACIL DA MADEIRA DE EUCALIPTO NA PRODUÇÃO DE CARVÃO VEGETAL , 2016 .

[2]  Ana Flávia Neves Mendes Castro,et al.  Potencial energético da madeira de Eucalyptus sp. em função da idade e de diferentes materiais genéticos , 2014 .

[3]  L. Calegari,et al.  Características físico-químicas e energéticas de duas espécies de ocorrência no semiárido brasileiro , 2012 .

[4]  C. Lima,et al.  RENDIMENTO E CARACTERIZAÇÃO DO CARVÃO VEGETAL DE TRÊS ESPÉCIES DE OCORRÊNCIA NO SEMIÁRIDO BRASILEIRO , 2012 .

[5]  Paulo Fernando Trugilho,et al.  Avaliação de clones de Eucalyptus em diferentes locais visando à produção de carvão vegetal , 2011 .

[6]  A. Carneiro,et al.  Parâmetros de qualidade da madeira e do carvão vegetal de Eucalyptus pellita F. Muell. , 2010 .

[7]  Maristela Machado Araújo,et al.  Carvão de resíduos de indústria madeireira de três espécies florestais exploradas no município de Paragominas, PA , 2007 .

[8]  Lúcio Valério Coutinho de Araújo,et al.  CARACTERÍSTICAS DENDROMÉTRICAS E DENSIDADE BÁSICA DA JUREMA-PRETA (Mimosa tenuiflora (WILLD.) POIR.) DE DUAS REGIÕES DO ESTADO DA PARAÍBA , 2006 .

[9]  H. Tonini,et al.  Dendrometria de espécies nativas em plantios homogêneos no estado de Roraima: andiroba (Carapa guianensis Aubl), castanha-do-Brasil (Bertholletia excelsa Bonpl.), ipê-roxo (Tabebuia avellanedae Lorentz ex Griseb) e jatobá (Hymenaea courbaril L.) , 2005 .