Radiative heat transfer analysis in pure scattering layers to be used in vacuum insulation panels

Radiative heat transfer in the pure scattering layers in vacuum insulation panels is analyzed using Monte Carlo method for two cases; for isotropic scattering and the other for pure backward scattering. The result for isotropically-scattering medium agrees well with the diffusion solution within 1% error. This, indeed, shows that the diffusion approximation can be used as a good approximation in the tested cases. The results also suggest that the radiative heat transfer in the vacuum insulation panels can be effectively reduced by increasing the optical thickness of the core material and/or decreasing the surface emissivity by inserting more radiation shields. When the pure backward scattering is applied, significant reduction is found in the radiative heat transfer rate compared with the isotropic scattering case. It is shown that radiative thermal conductivity of the scattering layer is decreased to nearly half for the backward scattering medium when the optical thickness is large and the wall emissivity is high. Thus, the materials with highly backward scattering are recommended to be used as the core or insertion material between the radiation shields to enhance the performance of the vacuum insulation panels.

[1]  Kb Cheong,et al.  EXAMINATION OF SOLUTION METHODS FOR THE SECOND-ORDER DISCRETE ORDINATE FORMULATION , 1995 .

[2]  S. Brunner,et al.  Effective thermal conductivity of a staggered double layer of vacuum insulation panels , 2011 .

[3]  Tae-Ho Song,et al.  Combined heat transfer in multi-layered radiation shields for vacuum insulation panels: Theoretical/numerical analyses and experiment , 2012 .

[4]  Hubert Schwab,et al.  Vacuum Insulation Panels – Exciting Thermal Properties and Most Challenging Applications , 2006 .

[5]  J. R. Howell,et al.  Monte carlo solution of thermal transfer through radiant media between gray walls. , 1964 .

[6]  M. Pinar Mengüç,et al.  Thermal Radiation Heat Transfer , 2020 .

[7]  Jae-Sung Kwon,et al.  Vacuum maintenance in vacuum insulation panels exemplified with a staggered beam VIP , 2010 .

[8]  R. F. Warming,et al.  Radiative transport and wall temperature slip in an absorbing planar medium , 1965 .

[9]  Dominique Baillis,et al.  Heat transfer modeling in vacuum insulation panels containing nanoporous silicas—A review , 2012 .

[10]  J. Fricke,et al.  Vacuum insulation panels—From research to market , 2008 .

[11]  J. S. Toor,et al.  A numerical experiment of radiant heat interchange by the monte carlo method , 1968 .

[12]  J. Hammersley,et al.  Monte Carlo Methods , 1965 .

[13]  R. Viskanta,et al.  Heat Transfer by Conduction and Radiation in Absorbing and Scattering Materials , 1965 .

[14]  Mukesh Limbachiya,et al.  Vacuum insulation panels (VIPs) for building construction industry: a review of the contemporary developments and future directions , 2011 .

[15]  W. Reiher.  Hammersley, J. M., D. C. Handscomb: Monte Carlo Methods. Methuen & Co., London, and John Wiley & Sons, New York, 1964. VII + 178 S., Preis: 25 s , 1966 .

[16]  Chih-Chen Chang,et al.  Measurement and Prediction of Thermal Conductivity of Open Cell Rigid Polyurethane Foam , 2001 .

[17]  Tae-Ho Song,et al.  Combined heat transfer of radiation and conduction in stacked radiation shields for vacuum insulatio , 2011 .

[18]  Hubert Schwab,et al.  Thermal Bridges in Vacuum-insulated Building Façades , 2005 .

[19]  R. Caps,et al.  Thermal Conductivity of Opacified Powder Filler Materials for Vacuum Insulations1 , 2000 .