Optimization strategy for minimizing damage in postbuckling stiffened panels

Composite materials are finding increasing use on primary aerostructures to meet demanding performance targets while reducing environmental impact. This paper presents a finite-element-based preliminary optimization methodology for postbuckling stiffened panels, which takes into account damage mechanisms that lead to delamination and subsequent failure by stiffener debonding. A global-local modeling approach is adopted in which the boundary conditions on the local model are extracted directly from the global model. The optimization procedure is based on a genetic algorithm that maximizes damage resistance within the postbuckling regime. This routine is linked to a finite element package and the iterative procedure automated. For a given loading condition, the procedure optimized the stacking sequence of several areas of the panel, leading to an evolved panel that displayed superior damage resistance in comparison with nonoptimized designs.

[1]  G.A.O. Davies,et al.  Buckling and postbuckling of composite structures , 1995 .

[2]  P. Camanho,et al.  Mixed-Mode Decohesion Finite Elements for the Simulation of Delamination in Composite Materials , 2002 .

[3]  Chiara Bisagni,et al.  Minimum Weight Optimization of Composite Stiffened Panels Using Neural Networks , 2003 .

[4]  Ya-Jung Lee,et al.  Stacking sequence optimization of laminated composite structures using genetic algorithm with local improvement , 2004 .

[5]  Narendra S. Khot,et al.  A numerical and experimental investigation of the buckling behavior of composite panels , 1982 .

[6]  Chun-Gon Kim,et al.  Minimum-weight design of compressively loaded composite plates and stiffened panels for postbuckling strength by Genetic Algorithm , 2003 .

[7]  Mark Walker,et al.  Optimization of symmetric laminates for maximum buckling load including the effects of bending-twisting coupling , 1996 .

[8]  Mark Walker,et al.  Optimal design of symmetric angle-ply laminates subject to nonuniform buckling loads and in-plane restraints , 1996 .

[9]  Mark Walker,et al.  Multiobjective optimization of laminated plates for maximum prebuckling, buckling and postbuckling strength using continuous and discrete ply angles , 1996 .

[10]  Brian Falzon,et al.  The behaviour of damage tolerant hat-stiffened composite panels loaded in uniaxial compression , 2001 .

[11]  Layne T. Watson,et al.  A genetic algorithm with memory for optimal design of laminated sandwich composite panels , 2002 .

[12]  Hisao Fukunaga,et al.  Buckling design of symmetrically laminated plates using lamination parameters , 1995 .

[13]  Grant P. Steven,et al.  Buckling mode transition in hat-stiffened composite panels loaded in uniaxial compression , 1997 .

[14]  Mark Walker,et al.  Application of MATHEMATICA to the optimal design of composite shells for improved buckling strength , 1998 .

[15]  Goldberg,et al.  Genetic algorithms , 1993, Robust Control Systems with Genetic Algorithms.

[16]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[17]  Mark Walker,et al.  Optimal design of symmetric laminates with cut-outs for maximum buckling load , 1999 .

[18]  E. Lavernia,et al.  An experimental investigation , 1992, Metallurgical and Materials Transactions A.

[19]  Gin Boay Chai,et al.  Buckling strength optimization of laminated composite plates , 1993 .

[20]  J. L. Walsh,et al.  Stacking-Sequence Optimization for Buckling of Laminated Plates by Integer Programming , 1991 .

[21]  Sarp Adali,et al.  Optimal design of hybrid laminates with discrete ply angles for maximum buckling load and minimum cost , 1995 .

[22]  David Bushnell,et al.  Optimization of composite, stiffened, imperfect panels under combined loads for service in the postbuckling regime , 1993 .

[23]  Michael P. Nemeth,et al.  Buckling and Postbuckling Behavior of Laminated Composite Plates With a Cutout , 1995 .

[24]  Christine M. Anderson-Cook,et al.  A genetic algorithm with memory for mixed discrete–continuous design optimization , 2003 .

[25]  James H. Starnes,et al.  Postbuckling behavior of selected flat stiffened graphite-epoxy panels loaded in compression , 1982 .

[26]  Layne T. Watson,et al.  Improved Genetic Algorithm for the Design of Stiffened Composite Panels , 1994 .

[27]  R. Haftka,et al.  Optimization of laminate stacking sequence for buckling load maximization by genetic algorithm , 1993 .

[28]  Chiara Bisagni,et al.  Post-buckling optimisation of composite stiffened panels using neural networks , 2002 .

[29]  D. E. Goldberg,et al.  Genetic Algorithms in Search , 1989 .

[30]  Sarp Adali,et al.  Optimization of laminated composites subject to uncertain buckling loads , 2003 .

[31]  G.A.O. Davies,et al.  Postbuckling behaviour of a blade-stiffened composite panel loaded in uniaxial compression , 2000 .

[32]  M. Gherlone,et al.  Multiconstrained optimization of laminated and sandwich plates using evolutionary algorithms and higher-order plate theories , 2003 .

[33]  Chang-Sun Hong,et al.  Postbuckling and failure of stiffened composite panels under axial compression , 1998 .

[34]  R. Haftka,et al.  Improved genetic algorithm for minimum thickness composite laminate design , 1995 .

[35]  Giulio Romeo,et al.  Experimental investigation on advanced composite-stiffened structures under uniaxial compression and bending , 1986 .

[36]  Raphael T. Haftka,et al.  Design and optimization of laminated composite materials , 1999 .

[37]  Nozomu Kogiso,et al.  Design of Composite Laminates by a Genetic Algorithm with Memory , 1994 .