Polymer:Nonfullerene Bulk Heterojunction Solar Cells with Exceptionally Low Recombination Rates

Organic semiconductors are in general known to have an inherently lower charge carrier mobility compared to their inorganic counterparts. Bimolecular recombination of holes and electrons is an important loss mechanism and can often be described by the Langevin recombination model. Here, the device physics of bulk heterojunction solar cells based on a nonfullerene acceptor (IDTBR) in combination with poly(3‐hexylthiophene) (P3HT) are elucidated, showing an unprecedentedly low bimolecular recombination rate. The high fill factor observed (above 65%) is attributed to non‐Langevin behavior with a Langevin prefactor (β/βL) of 1.9 × 10−4. The absence of parasitic recombination and high charge carrier lifetimes in P3HT:IDTBR solar cells inform an almost ideal bimolecular recombination behavior. This exceptional recombination behavior is explored to fabricate devices with layer thicknesses up to 450 nm without significant performance losses. The determination of the photoexcited carrier mobility by time‐of‐flight measurements reveals a long‐lived and nonthermalized carrier transport as the origin for the exceptional transport physics. The crystalline microstructure arrangement of both components is suggested to be decisive for this slow recombination dynamics. Further, the thickness‐independent power conversion efficiency is of utmost technological relevance for upscaling production and reiterates the importance of understanding material design in the context of low bimolecular recombination.

[1]  Christoph J. Brabec,et al.  High-performance ternary organic solar cells with thick active layer exceeding 11% efficiency , 2017 .

[2]  C. J. M. Emmott,et al.  Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells. , 2017, Nature materials.

[3]  O. Inganäs,et al.  Photogenerated Carrier Mobility Significantly Exceeds Injected Carrier Mobility in Organic Solar Cells , 2017 .

[4]  Yongfang Li,et al.  High‐Efficiency Nonfullerene Polymer Solar Cells with Medium Bandgap Polymer Donor and Narrow Bandgap Organic Semiconductor Acceptor , 2016, Advanced materials.

[5]  Kwanghee Lee,et al.  Bulk‐Heterojunction Organic Solar Cells: Five Core Technologies for Their Commercialization , 2016, Advanced materials.

[6]  C. Brabec,et al.  Designing ternary blend bulk heterojunction solar cells with reduced carrier recombination and a fill factor of 77% , 2016, Nature Energy.

[7]  E. D. Ranieri.  Organic solar cells: A new partner for P3HT , 2016 .

[8]  H. Ade,et al.  Fast charge separation in a non-fullerene organic solar cell with a small driving force , 2016, Nature Energy.

[9]  Alberto Salleo,et al.  High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor , 2016, Nature Communications.

[10]  Feng Gao,et al.  Fullerene‐Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability , 2016, Advanced materials.

[11]  C. B. Nielsen,et al.  Non-Fullerene Electron Acceptors for Use in Organic Solar Cells , 2015, Accounts of chemical research.

[12]  Luping Yu,et al.  Recent Advances in Bulk Heterojunction Polymer Solar Cells. , 2015, Chemical reviews.

[13]  Wei You,et al.  Status and prospects for ternary organic photovoltaics , 2015, Nature Photonics.

[14]  C. Brabec,et al.  Photophysics of Molecular‐Weight‐Induced Losses in Indacenodithienothiophene‐Based Solar Cells , 2015 .

[15]  Timothy M. Burke,et al.  Disorder‐Induced Open‐Circuit Voltage Losses in Organic Solar Cells During Photoinduced Burn‐In , 2015 .

[16]  Itaru Osaka,et al.  Efficient inverted polymer solar cells employing favourable molecular orientation , 2015, Nature Photonics.

[17]  Timothy M. Burke,et al.  Beyond Langevin Recombination: How Equilibrium Between Free Carriers and Charge Transfer States Determines the Open‐Circuit Voltage of Organic Solar Cells , 2015 .

[18]  Dieter Neher,et al.  Competition between recombination and extraction of free charges determines the fill factor of organic solar cells , 2015, Nature Communications.

[19]  Feng Liu,et al.  Single-junction polymer solar cells with high efficiency and photovoltage , 2015, Nature Photonics.

[20]  Tracey M. Clarke,et al.  A Comparison of Five Experimental Techniques to Measure Charge Carrier Lifetime in Polymer/Fullerene Solar Cells , 2015 .

[21]  He Yan,et al.  Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells , 2014, Nature Communications.

[22]  Ajay K. Pandey,et al.  Advantage of suppressed non-Langevin recombination in low mobility organic solar cells , 2014 .

[23]  C. Brabec,et al.  Increased Open‐Circuit Voltage of Organic Solar Cells by Reduced Donor‐Acceptor Interface Area , 2014, Advanced materials.

[24]  Paul L. Burn,et al.  Balanced Carrier Mobilities: Not a Necessary Condition for High‐Efficiency Thin Organic Solar Cells as Determined by MIS‐CELIV , 2014 .

[25]  Juliane Kniepert,et al.  Nongeminate and Geminate Recombination in PTB7:PCBM Solar Cells , 2014, 2106.10101.

[26]  R. Po’,et al.  From lab to fab: how must the polymer solar cell materials design change? – an industrial perspective , 2014 .

[27]  R. Friend,et al.  Unequal partnership: asymmetric roles of polymeric donor and fullerene acceptor in generating free charge. , 2014, Journal of the American Chemical Society.

[28]  Christoph J. Brabec,et al.  Highly efficient organic tandem solar cells: a follow up review , 2013 .

[29]  John R. Tumbleston,et al.  Absolute Measurement of Domain Composition and Nanoscale Size Distribution Explains Performance in PTB7:PC71BM Solar Cells , 2013 .

[30]  Robert A. Street,et al.  Recombination Through Different Types of Localized States in Organic Solar Cells , 2012 .

[31]  Simone Fabiano,et al.  Asymmetric electron and hole transport in a high-mobility n-type conjugated polymer , 2012 .

[32]  R. J. Kline,et al.  Poly(3-hexylthiophene) and [6,6]-Phenyl-C61-butyric Acid Methyl Ester Mixing in Organic Solar Cells , 2012 .

[33]  Suren A. Gevorgyan,et al.  Stability of Polymer Solar Cells , 2012, Advanced materials.

[34]  Tracey M. Clarke,et al.  Non-Langevin bimolecular recombination in a silole-based polymer:PCBM solar cell measured by time-resolved charge extraction and resistance-dependent time-of-flight techniques , 2012 .

[35]  C. Brabec,et al.  Charge Transport and Recombination in Low‐Bandgap Bulk Heterojunction Solar Cell using Bis‐adduct Fullerene , 2011 .

[36]  Juliane Kniepert,et al.  Photogeneration and Recombination in P3HT/PCBM Solar Cells Probed by Time-Delayed Collection Field Experiments , 2011 .

[37]  Craig J. Hawker,et al.  Interdiffusion of PCBM and P3HT Reveals Miscibility in a Photovoltaically Active Blend , 2011 .

[38]  B. Collins,et al.  Molecular Miscibility of Polymer-Fullerene Blends , 2010 .

[39]  J. Nelson,et al.  Recombination in Annealed and Nonannealed Polythiophene/Fullerene Solar Cells: Transient Photovoltage Studies versus Numerical Modeling , 2010 .

[40]  Jean Manca,et al.  The Relation Between Open‐Circuit Voltage and the Onset of Photocurrent Generation by Charge‐Transfer Absorption in Polymer : Fullerene Bulk Heterojunction Solar Cells , 2008 .

[41]  J. C. de Mello,et al.  Experimental determination of the rate law for charge carrier decay in a polythiophene: Fullerene solar cell , 2008 .

[42]  N. S. Sariciftci,et al.  A review of charge transport and recombination in polymer/fullerene organic solar cells , 2007 .

[43]  Valentin D. Mihailetchi,et al.  Charge Transport and Photocurrent Generation in Poly(3‐hexylthiophene): Methanofullerene Bulk‐Heterojunction Solar Cells , 2006 .

[44]  Valentin D. Mihailetchi,et al.  Bimolecular recombination in polymer/fullerene bulk heterojunction solar cells , 2006 .

[45]  V. Mihailetchi,et al.  Space-charge limited photocurrent. , 2005, Physical review letters.

[46]  E. Montroll,et al.  Anomalous transit-time dispersion in amorphous solids , 1975 .