A short-time diffusion correlation for hydrogen-induced crack growth kinetics

[1]  W. Gerberich,et al.  Hydrogen-controlled cracking—An approach to threshold stress intensity , 1975 .

[2]  R. A. Oriani,et al.  Equilibrium aspects of hydrogen-induced cracking of steels , 1974 .

[3]  H. H. Johnson,et al.  Hydrogen transport through annealed and deformed armco iron , 1974, Metallurgical and Materials Transactions B.

[4]  H. V. Leeuwen.  A Quantitative Model of Hydrogen Induced Grain Boundary Cracking , 1973 .

[5]  W. Gerberich,et al.  The effect of loading mode on hydrogen embrittlement , 1973 .

[6]  B. Syrett.  Lattice Dilatation and Hydrogen Embrittlement Cracking , 1973 .

[7]  S. Fenves.  Numerical and computer methods in structural mechanics , 1973 .

[8]  C. S. Kortovich,et al.  A comparison of hydrogen embrittlement and stress corrosion cracking in high-strength steels , 1972 .

[9]  R. Staehle,et al.  Slow crack growth in hydrogen and hydrogen sulfide gas environments , 1972 .

[10]  A. Sullivan.  Stress corrosion crack velocity in 4340 steel , 1972 .

[11]  C. D. Beachem,et al.  A new model for hydrogen-assisted cracking (hydrogen “embrittlement”) , 1972 .

[12]  W. Reuter,et al.  Stress corrosion cracking in an air-melted and vacuum-arc-remelted grade-250 maraging steel , 1971 .

[13]  H. Smith,et al.  A note on stress corrosion cracking rates , 1971 .

[14]  J. Williams,et al.  On the mechanical interaction between a crack tip and a point defect , 1971 .

[15]  C. S. Carter.  STRESS CORROSION CRACK BRANCHING IN HIGH-STRENGTH STEELS , 1971 .

[16]  A. Tetelman,et al.  NON-DESTRUCTIVE CHARACTERIZATION OF HYDROGEN-EMBRITTLEMENT CRACKING BY ACOUSTIC EMISSION TECHNIQUES. , 1971 .

[17]  H. W. Liu.  Stress-Corrosion Cracking and the Interaction Between Crack-Tip Stress Field and Solute Atoms , 1970 .

[18]  C. S. Carter,et al.  Observations on the Stress Corrosion Crack Propagation Characteristics of High Strength Steels , 1970 .

[19]  V. Colangelo,et al.  The Role of the Strain Hardening Exponent in Stress Corrosion Cracking of a High Strength Steel , 1969 .

[20]  C. S. Carter.  The Effect of Silicon on the Stress Corrosion Resistance of Low Alloy High Strength Steels , 1969 .

[21]  W. A. Van Der Sluys,et al.  Mechanisms of environment induced subcritical flaw growth in AISI 4340 steel , 1969 .

[22]  J. Williams,et al.  The effect of creep stress on the angular distribution of secondary cracks in copper , 1969 .

[23]  F. R. Coe,et al.  A Kinetic Approach to Hydrogen Diffusion through Steel at 100–350°C , 1969 .

[24]  A. J. McEvily,et al.  Fracture of Structural Materials , 1967 .

[25]  Henry Eyring,et al.  Hydrogen in metals , 1948 .