Wear behavior of SiAlON ceramic tool and its effects during high-speed cutting

[1]  Dinghua Zhang,et al.  Effects of tool wear on machined surface integrity during milling of Inconel 718 , 2021, The International Journal of Advanced Manufacturing Technology.

[2]  M. Fonseca,et al.  Effect of tool wear on the surface integrity of Inconel 718 in face milling with cemented carbide tools , 2021, Wear.

[3]  Dazhong Wang,et al.  Study on the performances of the drilling process of nickel-based superalloy Inconel 718 with differently micro-textured drilling tools , 2020 .

[4]  Jun Zhao,et al.  Cutting performance, failure mechanisms and tribological properties of GNPs reinforced Al2O3/Ti(C,N) ceramic tool in high speed turning of Inconel 718 , 2020 .

[5]  Heng Zhang,et al.  Cutting responses of additive manufactured Ti6Al4V with solid ceramic tool under dry high-speed milling processes , 2020 .

[6]  Stephen C. Veldhuis,et al.  Chip formation and tribological behavior in high-speed milling of IN718 with ceramic tools , 2020 .

[7]  J. Dang,et al.  Prediction of machining-induced residual stress in orthogonal cutting of Ti6Al4V , 2020 .

[8]  Q. Song,et al.  Tool wear and hole quality evaluation in cryogenic Drilling of Inconel 718 superalloy , 2020 .

[9]  Wuyi Chen,et al.  Cutting performance and wear mechanism of Sialon ceramic tools in high speed face milling GH4099 , 2020 .

[10]  A. Hadzley,et al.  Fabrication and machining performance of ceramic cutting tool based on the Al2O3-ZrO2-Cr2O3 compositions , 2019, Journal of Materials Research and Technology.

[11]  S. Veldhuis,et al.  Influence of process parameters on the cutting performance of SiAlON ceramic tools during high-speed dry face milling of hardened Inconel 718 , 2019, The International Journal of Advanced Manufacturing Technology.

[12]  Zhongbin Wang,et al.  Performance of Si3N4/(W, Ti)C graded ceramic tool in high-speed turning iron-based superalloys , 2018, Ceramics International.

[13]  D. Aspinwall,et al.  Tool life and workpiece surface integrity when turning an RR1000 nickel-based superalloy , 2018, The International Journal of Advanced Manufacturing Technology.

[14]  Farbod Akhavan Niaki,et al.  A comprehensive study on the effects of tool wear on surface roughness, dimensional integrity and residual stress in turning IN718 hard-to-machine alloy , 2017 .

[15]  Haidong Wu,et al.  PVD-CrAlN and TiAlN coated Si3N4 ceramic cutting inserts-2. High speed face milling performance and wear mechanism study , 2017 .

[16]  Domenico Umbrello,et al.  Experimental Investigation to Optimize Tool Life and Surface Roughness in Inconel 718 Machining , 2016 .

[17]  Chuanzhen Huang,et al.  Cutting performance and life prediction of an Al2O3/TiC micro–nano-composite ceramic tool when machining austenitic stainless steel , 2015 .

[18]  Chen Zhitong,et al.  Influence of cutting speed and tool wear on the surface integrity of the titanium alloy Ti-1023 during milling , 2015 .

[19]  Kejia Zhuang,et al.  Employing preheating- and cooling-assisted technologies in machining of Inconel 718 with ceramic cutting tools: towards reducing tool wear and improving surface integrity , 2015 .

[20]  Chuanzhen Huang,et al.  Effects of metal phases and carbides on the microstructure and mechanical properties of Ti(C,N)-based cermets cutting tool materials , 2014 .

[21]  Jianxin Deng,et al.  Cutting performance and wear characteristics of Al2O3/TiC ceramic cutting tools with WS2/Zr soft-coatings and nano-textures in dry cutting , 2014 .

[22]  D. Ulutan,et al.  Machining induced surface integrity in titanium and nickel alloys: A review , 2011 .

[23]  Mahmudur Rahman,et al.  Performance of carbide cutting tools when machining of nickel based alloy , 2010 .

[24]  P. Withers,et al.  Minor cutting edge-workpiece interactions in drilling of an advanced nickel-based superalloy , 2009 .

[25]  Keith Ridgway,et al.  Surface integrity and tool life when turning Inconel 718 using ultra-high pressure and flood coolant systems , 2008 .

[26]  Keith Ridgway,et al.  Tool life and surface integrity aspects when drilling and hole making in Inconel 718 , 2008 .

[27]  XiaoQi Chen,et al.  An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts , 2006 .

[28]  Keith Ridgway,et al.  An analysis of the residual stresses generated in Inconel 718™ when turning , 2006 .

[29]  E. Ezugwu.  Key improvements in the machining of difficult-to-cut aerospace superalloys , 2005 .

[30]  S. Liang,et al.  Modelling of the cutting temperature distribution under the tool flank wear effect , 2003 .

[31]  Richard E. DeVor,et al.  A NEW MECHANISTIC MODEL FOR PREDICTING WORN TOOL CUTTING FORCES , 2001 .

[32]  Ranga Komanduri,et al.  Thermal modeling of the metal cutting process: Part I — Temperature rise distribution due to shear plane heat source , 2000 .

[33]  Bing Wang,et al.  State-of-the-art of surface integrity induced by tool wear effects in machining process of titanium and nickel alloys: A review , 2019, Measurement.

[34]  J. Ståhl,et al.  Analysis of Subsurface Microstructure and Residual Stresses in Machined Inconel 718 with PCBN and Al2O3-SiCw Tools , 2014 .

[35]  J. Ståhl,et al.  Effects of Tool Wear on Subsurface Deformation of Nickel-based Superalloy , 2011 .

[36]  Ekkard Brinksmeier,et al.  Surface integrity in material removal processes: Recent advances , 2011 .

[37]  Z. M. Wang,et al.  Tool Life and Surface Integrity When Machining Inconel 718 With PVD- and CVD-Coated Tools , 1999 .