Two simple and efficient displacement‐based quadrilateral elements for the analysis of composite laminated plates

Two simple 4-node 20-DOF and 4-node 24-DOF displacement-based quadrilateral elements named RDKQ-L20 and RDKQ-L24 are developed in this paper based on the first-order shear deformation theory (FSDT) for linear analysis of thin to moderately thick laminates. The deflection and rotation functions of the element sides are obtained from Timoshenko's laminated composite beam functions. Linear displacement interpolation functions of the standard 4-node quadrilateral isoparametric plane element and displacement functions of a quadrilateral plane element with drilling degrees of freedom are taken as in-plane displacements of the proposed elements RDKQ-L20 and RDKQ-L24, respectively. Due to the application of Timoshenko's laminated composite beam functions, convergence can be ensured theoretically for very thin laminates. The elements are simple in formulation, and shear-locking free for extremely thin laminates even with full integration. A hybrid-enhanced procedure is employed to improve the accuracy of stress analysis, especially for transverse shear stresses. Numerical tests show that the new elements are convergent, not sensitive to mesh distortion, accurate and efficient for analysis of thin to moderately thick laminates. Copyright © 2004 John Wiley & Sons, Ltd.

[1]  S. Liu.  A finite element analysis procedure using simple quadrilateral plate/shell elements , 1989 .

[2]  S. V. Kulkarni,et al.  Shear Correction Factors for Laminated Plates , 1979 .

[3]  P. Lardeur,et al.  Composite plate analysis using a new discrete shear triangular finite element , 1989 .

[4]  Song Cen,et al.  A new hybrid-enhanced displacement-based element for the analysis of laminated composite plates , 2002 .

[5]  Song Cen,et al.  A new nine DOF triangular element for analysis of thick and thin plates , 1999 .

[6]  Thomas J. R. Hughes,et al.  A simple and efficient finite element for plate bending , 1977 .

[7]  Adnan Ibrahimbegovic,et al.  Quadrilateral finite elements for analysis of thick and thin plates , 1993 .

[8]  Ferdinando Auricchio,et al.  A mixed‐enhanced finite‐element for the analysis of laminated composite plates , 1999 .

[9]  Stefanos Vlachoutsis,et al.  Shear correction factors for plates and shells , 1992 .

[10]  O. C. Zienkiewicz,et al.  Plate bending elements with discrete constraints: New triangular elements , 1990 .

[11]  N. Pagano,et al.  Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates , 1970 .

[12]  Ted Belytschko,et al.  Regularization of material instabilities by meshfree approximations with intrinsic length scales , 2000 .

[13]  J. Whitney,et al.  The Effect of Boundary Conditions on the Response of Laminated Composites , 1970 .

[14]  Chen Wanji,et al.  Refined quadrilateral element based on Mindlin/Reissner plate theory , 2000 .

[15]  Song Cen,et al.  A new twelve DOF quadrilateral element for analysis of thick and thin plates , 2001 .

[16]  Chen Wanji,et al.  Refined 9‐Dof triangular Mindlin plate elements , 2001 .

[17]  P. G. Hill,et al.  Computer simulation of turbulent swirling flows , 1990 .

[18]  N. Pagano,et al.  Exact Solutions for Composite Laminates in Cylindrical Bending , 1969 .

[19]  Atef F. Saleeb,et al.  A mixed element for laminated plates and shells , 1990 .

[20]  Gangan Prathap,et al.  A field-consistent, four-noded, laminated anisotropic plate/shell element , 1987 .

[21]  Irwan Katili,et al.  On a simple triangular reissner/mindlin plate element based on incompatible modes and discrete constraints , 1992 .

[22]  Irwan Katili,et al.  A new discrete Kirchhoff-Mindlin element based on Mindlin-Reissner plate theory and assumed shear strain fields. I - An extended DKT element for thick-plate bending analysis. II - An extended DKQ element for thick-plate bending analysis , 1993 .

[23]  O. C. Zienkiewicz,et al.  Reduced integration technique in general analysis of plates and shells , 1971 .

[24]  J. Reddy.  Mechanics of laminated composite plates : theory and analysis , 1997 .

[25]  P. Lardeur,et al.  A discrete shear triangular nine D.O.F. element for the analysis of thick to very thin plates , 1989 .

[26]  Adnan Ibrahimbegovic,et al.  Plate quadrilateral finite element with incompatible modes , 1992 .

[27]  Zengjie Ge,et al.  A refined discrete triangular Mindlin element for laminated composite plates , 2002 .

[28]  N. J. Pagano,et al.  Elastic Behavior of Multilayered Bidirectional Composites , 1972 .

[29]  Edward A. Sadek.  Some serendipity finite elements for the analysis of laminated plates , 1998 .

[30]  J. Whitney,et al.  Shear Correction Factors for Orthotropic Laminates Under Static Load , 1973 .

[31]  Gajbir Singh,et al.  A new lock-free, material finite element for flexure of moderately thick rectangular composite plates , 1998 .

[32]  E. Günay,et al.  A new heterosis plate element for geometrically non-linear finite element analysis of laminated plates , 1997 .

[33]  Medhat A. Haroun,et al.  Reduced and selective integration techniques in the finite element analysis of plates , 1978 .

[34]  D. Malkus,et al.  Mixed finite element methods—reduced and selective integration techniques: a unification of concepts , 1990 .

[35]  Irwan Katili,et al.  A new discrete Kirchhoff-Mindlin element based on Mindlin–Reissner plate theory and assumed shear strain fields—part II: An extended DKQ element for thick-plate bending analysis , 1993 .

[36]  Robert L. Spilker,et al.  Hybrid-stress isoparametric elements for moderately thick and thin multilayer plates , 1986 .

[37]  Eugenio Oñate,et al.  A general methodology for deriving shear constrained Reissner‐Mindlin plate elements , 1992 .