Multi-approach back-analysis of a roof bed collapse in a mining room excavated in stratified rock

Roof bed deformation mechanics is a complex topic in mining practice. There are a number of empirical, analytical and numerical techniques that can be used to analyze and design underground excavations in stratified rock masses. Each has particular drawbacks, however, so the use of just one approach in order to obtain consistent and economic designs is not practical. To deepen understanding of this topic, it is useful to study real failure in mines. In this paper we describe how a roof bed failure in an underground mine, excavated in a stratified rock mass, was back-analyzed using different approaches, namely, the empirical stability graph method, the analytical voussoir techniques, and the numerical discrete element method. The study enabled us to better understand the conditions of failure and to define the most significant parameters affecting the failure. It has also been shown how relaxation or loss of confinement stress can play an important role in roof bed deformation.

[1]  A. M. Starfield,et al.  TOWARDS A METHODOLOGY FOR ROCK MECHANICS MODELLING , 1988 .

[2]  Nick Barton,et al.  The shear strength of rock and rock joints , 1976 .

[3]  D. Wood.  Soil Behaviour and Critical State Soil Mechanics , 1991 .

[4]  J. Ran,et al.  Shear sliding failure of the jointed roof in laminated rock mass , 1994 .

[5]  J. A. Franklin,et al.  THE POINT-LOAD STRENGTH TEST , 1972 .

[6]  M David,et al.  Grade control problems dilution and geostatistics; choosing the required quality and number of samples for grade control , 1989 .

[7]  Leonard Obert,et al.  Rock mechanics and the design of structures in rock , 1967 .

[8]  Nick Barton,et al.  Review of predictive capabilities of JRC-JCS model in engineering practice , 1991 .

[9]  E. Hoek,et al.  Empirical estimation of rock mass modulus , 2006 .

[10]  A. I. Sofianos,et al.  Analysis and design of an underground hard rock voussoir beam roof , 1996 .

[11]  B. Stimpson.  A suggested technique for determining the basic friction angle of rock surfaces using core , 1981 .

[12]  Mark S. Diederichs,et al.  Instability of hard rockmasses, the role of tensile damage and relaxation , 2000 .

[13]  I. S. Cameron-Clarke,et al.  Correlation of rock mass classification parameters obtained from borecore and In-situ observations , 1981 .

[14]  E. T. Brown,et al.  Rock characterization testing and monitoring , 1981 .

[15]  N. Barton,et al.  The shear strength of rock joints in theory and practice , 1977 .

[16]  Leonard Obert,et al.  Design of Underground Openings in Competent Rock , 1960 .

[17]  Simon D. Nickson,et al.  Cable support guidelines for underground hard rock mine operations , 1992 .

[18]  Mark S. Diederichs,et al.  Tensile strength and abutment relaxation as failure control mechanisms in underground excavations , 1999 .

[19]  P. K. Kaiser,et al.  Support of underground excavations in hard rock , 1995 .

[20]  Z. Bieniawski.  Engineering rock mass classifications , 1989 .

[21]  E. T. Brown,et al.  Rock Mechanics: For Underground Mining , 1985 .

[22]  C. Martin,et al.  Seventeenth Canadian Geotechnical Colloquium: The effect of cohesion loss and stress path on brittle rock strength , 1997 .

[23]  Nick Barton,et al.  Some new Q-value correlations to assist in site characterisation and tunnel design , 2002 .

[24]  Z. T. Bieniawski,et al.  The Geomechanics Classification In Rock Engineering Applications , 1979 .

[25]  Yves Potvin,et al.  Empirical open stope design in Canada , 1988 .

[26]  Mark S. Diederichs,et al.  Stability of large excavations in laminated hard rock masses: the voussoir analogue revisited , 1999 .

[27]  Nick Barton,et al.  Engineering classification of rock masses for the design of tunnel support , 1974 .