Numerical investigation of a novel vacuum photovoltaic curtain wall and integrated optimization of photovoltaic envelope systems

[1]  A. Saltelli,et al.  Sensitivity analysis of an environmental model: an application of different analysis methods , 1997 .

[2]  Philip C. Eames,et al.  Fabrication of evacuated glazing at low temperature , 1998 .

[3]  F. Al-Ragom,et al.  On the effect of glazing and code compliance , 2002 .

[4]  Stefano Tarantola,et al.  Sensitivity Analysis in Practice: A Guide to Assessing Scientific Models , 2004 .

[5]  O. Gomez-Daza,et al.  Spectrally selective laminated glazing consisting of solar control and heat mirror coated glass: preparation, characterization and modelling of heat transfer , 2005 .

[6]  John Mardaljevic,et al.  Useful daylight illuminances: A replacement for daylight factors , 2006 .

[7]  Roberto Lamberts,et al.  Improvement of a measurement system for solar heat gain through fenestrations , 2007 .

[8]  Hongxing Yang,et al.  Study on thermal performance of semi-transparent building-integrated photovoltaic glazings , 2008 .

[9]  Danny H.W. Li,et al.  Energy and cost analysis of semi-transparent photovoltaic in office buildings , 2009 .

[10]  C. Gueymard,et al.  Spectral effects on the transmittance, solar heat gain, and performance rating of glazing systems , 2009 .

[11]  Alfonso Capozzoli,et al.  USE of the ANOVA approach for sensitive building energy design , 2010 .

[12]  Marjorie Musy,et al.  Application of sensitivity analysis in building energy simulations: combining first and second order elementary effects Methods , 2012, ArXiv.

[13]  Bjørn Petter Jelle,et al.  Building integrated photovoltaic products: A state-of-the-art review and future research opportunities , 2012 .

[14]  Wei Tian,et al.  A review of sensitivity analysis methods in building energy analysis , 2013 .

[15]  Lin Lu,et al.  Investigation on the annual thermal performance of a photovoltaic wall mounted on a multi-layer façade , 2013 .

[16]  Lin Lu,et al.  Overall energy performance of semi-transparent single-glazed photovoltaic (PV) window for a typical office in Hong Kong , 2013 .

[17]  Francesco Causone,et al.  Multi-objective optimization of a nearly zero-energy building based on thermal and visual discomfort minimization using a non-dominated sorting genetic algorithm (NSGA-II) , 2015 .

[18]  Shen Xu,et al.  Energy performance comparison among see-through amorphous-silicon PV (photovoltaic) glazings and traditional glazings under different architectural conditions in China , 2015 .

[19]  Nikolaos Skandalos,et al.  PV glazing technologies , 2015 .

[20]  Mario Sassone,et al.  The early design stage of a building envelope: Multi-objective search through heating, cooling and lighting energy performance analysis , 2015 .

[21]  Lin Lu,et al.  Comparison of the overall energy performance of semi-transparent photovoltaic windows and common energy-efficient windows in Hong Kong , 2016 .

[22]  Farshad Kowsary,et al.  Multi-objective optimization of the building energy performance: A simulation-based approach by means of particle swarm optimization (PSO) , 2016 .

[23]  Hongxing Yang,et al.  Assessment of energy performance of semi-transparent PV insulating glass units using a validated simulation model , 2016 .

[24]  Jlm Jan Hensen,et al.  Analysis of the predicted effect of passive climate adaptation measures on energy demand for cooling and heating in a residential building , 2016 .

[25]  Yeonsook Heo,et al.  Sensitivity analysis methods for building energy models: Comparing computational costs and extractable information , 2016 .

[26]  Gerardo Maria Mauro,et al.  Multi-stage and multi-objective optimization for energy retrofitting a developed hospital reference building: A new approach to assess cost-optimality , 2016 .

[27]  Giuseppe Peter Vanoli,et al.  Optimization of building envelope design for nZEBs in Mediterranean climate: Performance analysis of residential case study , 2016 .

[28]  Brian Norton,et al.  Measured thermal & daylight performance of an evacuated glazing using an outdoor test cell , 2016 .

[29]  Marina Khoroshiltseva,et al.  A Pareto-based multi-objective optimization algorithm to design energy-efficient shading devices , 2016 .

[30]  Enedir Ghisi,et al.  Decision-making process for improving thermal and energy performance of residential buildings: A case study of constructive systems in Brazil , 2016 .

[31]  Ke Sun,et al.  A holistic passive design approach to optimize indoor environmental quality of a typical residential building in Hong Kong , 2016 .

[32]  Hongxing Yang,et al.  Numerical investigation of the energy saving potential of a semi-transparent photovoltaic double-skin facade in a cool-summer Mediterranean climate , 2016 .

[33]  Hongxing Yang,et al.  A multi-stage optimization of passively designed high-rise residential buildings in multiple building operation scenarios , 2017 .

[34]  Ke Sun,et al.  Developing a meta-model for sensitivity analyses and prediction of building performance for passively designed high-rise residential buildings , 2017 .

[35]  Lin Lu,et al.  Performance Evaluation of Vacuum Photovoltaic Insulated Glass Unit , 2017 .

[36]  Lin Lu,et al.  Energy performance and heat transfer characteristics of photovoltaic double skin facades (PV-DSFs): a review , 2017 .

[37]  Hongxing Yang,et al.  Comparison of energy performance between PV double skin facades and PV insulating glass units , 2017 .

[38]  Hongxing Yang,et al.  Integrated energy performance optimization of a passively designed high-rise residential building in different climatic zones of China , 2018 .

[39]  Erdem Cuce,et al.  Accurate and reliable U -value assessment of argon-filled double glazed windows: A numerical and experimental investigation , 2018, Energy and Buildings.

[40]  Hongxing Yang,et al.  Simulation-based approach to optimize passively designed buildings: A case study on a typical architectural form in hot and humid climates , 2018 .