Monitoring Method of Total Seed Mass in a Vibrating Tray Using Artificial Neural Network

To maintain the continuous working performance of a vacuum plate seeder, it is important to monitor the total seed mass in the seed tray in real time and accurately control the pickup position of the suction plate accordingly. Under the excitation of reciprocating vibration varying with time and interference by direction angle, the motion of seeds in a rectangular tray was simulated using the discrete element method (DEM). A measurement method for seed mass in a small area was proposed based on the impulse theorem. The impact force of seeds was monitored with a cantilever force sensor, and the corresponding signal processing circuit was designed. Calibration results indicated that the relative nonlinear error was less than 2.3% with an average seeds-mass-per-unit-area (SMA) of 0.3–2.4 g/cm2. Then, four sets of force sensors were installed symmetrically near the four corners of the vibrating tray which were used to measure the SMA respectively. Back propagation (BP) neural networks which take four SMA measurement results as input parameters were developed to monitor the total seed mass in the tray. Monitoring results using DEM simulation data showed that the general relative error was 3.0%. Experiments were carried out on a test-rig and the results validated that the relative error was reduced to 5.0% by using the BP neural network method.

[1]  W. Powrie,et al.  Discrete element simulation of railway ballast: modelling cell pressure effects in triaxial tests , 2016 .

[2]  Marek Molenda,et al.  Discharge of rapeseeds from a model silo: Physical testing and discrete element method simulations , 2013 .

[3]  Liu Haiyan,et al.  Experimental study on the performance of bowl-tray rice precision seeder , 2014 .

[4]  Xiaomei Wang,et al.  A multi-sphere based modelling method for maize grain assemblies , 2017 .

[5]  Rong Zhu,et al.  A Two-Dimensional Flow Sensor with Integrated Micro Thermal Sensing Elements and a Back Propagation Neural Network , 2013, Sensors.

[6]  E Movahedi,et al.  DESIGN, DEVELOPMENT AND EVALUATION OF A PNEUMATIC SEEDER FOR AUTOMATIC PLANTING OF SEEDS IN CELLULAR TRAYS , 2014 .

[7]  J. Favier,et al.  Model for the deformation in agricultural and food particulate materials under bulk compressive loading using discrete element method. I: Theory, model development and validation , 2004 .

[8]  Fabian Weigler,et al.  Investigation of grain mass flow in a mixed flow dryer , 2014 .

[9]  Rimantas Kačianauskas,et al.  Investigation of rice grain flow by multi-sphere particle model with rolling resistance , 2011 .

[10]  Guy T. Houlsby,et al.  A new algorithm for contact detection between convex polygonal and polyhedral particles in the discrete element method , 2012 .

[11]  Gauri S. Mittal,et al.  Prediction of performance indices and optimal parameters of rough rice drying using neural networks , 2002 .

[12]  Fuqiang Zhou,et al.  Detection of Foreign Matter in Transfusion Solution Based on Gaussian Background Modeling and an Optimized BP Neural Network , 2014, Sensors.

[13]  Josephine M. Boac,et al.  Applications of Discrete Element Method in Modeling of Grain Postharvest Operations , 2014, Food Engineering Reviews.

[14]  Simon X. Yang,et al.  Prediction of seed distribution in rectangular vibrating tray using grey model and artificial neural network , 2018, Biosystems Engineering.

[15]  Mehmet Topakci,et al.  Sesame Hill Dropping Performance of a Vacuum Seeder for Different Tillage Practices , 2011 .

[16]  Zhan Zhao,et al.  Monitoring method of rice seeds mass in vibrating tray for vacuum-panel precision seeder , 2015, Comput. Electron. Agric..

[17]  M. Molenda,et al.  Parameters and contact models for DEM simulations of agricultural granular materials: A review , 2016 .

[18]  He RuiYin,et al.  Comparison and analysis of different rice planting methods in China , 2008 .

[19]  Wei Zhou,et al.  Methodology of fertilizer recommendation based on yield response and agronomic efficiency for rice in China , 2017 .

[20]  G. Buscarnera,et al.  DEM assessment of scaling laws capturing the grain size dependence of yielding in granular soils , 2016 .

[21]  J. De Baerdemaeker,et al.  Discrete element modelling for process simulation in agriculture , 2003 .

[22]  G. Lu,et al.  Discrete element models for non-spherical particle systems: From theoretical developments to applications , 2015 .

[23]  Frédéric Cointault,et al.  Influence of the divider head functioning conditions and geometry on the seed's distribution accuracy of the air-seeder , 2017 .

[24]  Yin Jianjun,et al.  Monitoring method of rice seeds mass in vibrating tray for vacuum-panel precision seeder , 2015 .