Crash Safety Assurance Strategies For Future Plastic and Composite Intensive Vehicles (PCIVs)
暂无分享,去创建一个
Daniel O. Adams | D. Adams | Graham Bames | Ian Coles | Richard Roberts | David M. Gamer | Graham Bames | Ian Coles | R. Roberts
[1] D. Matlock,et al. Assessment of the Strain-Rate Dependent Tensile Properties of Automotive Sheet Steels , 2004 .
[2] A. Pickett,et al. Experimental testing and phenomenological modelling of the fragmentation process of braided carbon/epoxy composite tubes under axial and oblique impact , 2008 .
[3] D. Hull,et al. A unified approach to progressive crushing of fibre-reinforced composite tubes , 1991 .
[4] Gary Savage,et al. DAMAGE EVALUATION AND REPAIR OF COMPOSITE STRUCTURES , 2008 .
[5] Raymond G. Boeman,et al. Strain rate effects on the mechanical properties of polymer composite materials , 2004 .
[6] Dimitrios E. Manolakos,et al. On the response of thin-walled CFRP composite tubular components subjected to static and dynamic axial compressive loading: experimental , 2005 .
[7] Robert L. Taylor,et al. A constitutive model for anisotropic damage in fiber-composites , 1995 .
[8] D. Dillard,et al. Characterizing Dynamic Fracture Behavior of Adhesive Joints under Quasi-Static and Impact Loading , 2005 .
[9] J. M. Starbuck,et al. Crashworthiness of various random chopped carbon fiber reinforced epoxy composite materials and their strain rate dependence , 2006 .
[10] J. M. Starbuck,et al. The effect of loading rate on the fracture toughness of fiber reinforced polymer composites , 2005 .
[11] Jun Young Chung,et al. Roles of discontinuities in bio-inspired adhesive pads , 2005, Journal of The Royal Society Interface.
[12] Sotiris Kellas,et al. Dynamic crush tests of energy-absorbing laminated composite plates , 1996 .
[13] Z. Fan,et al. Crash Energy Absorption of Braided Composite Tubes and its Application in Vehicle Passive Safety , 2012 .
[14] G. Dean,et al. Project PAJ2. Report No 10. A proposed failure criterion for tough adhesives. , 1999 .
[15] D. H. Laananen,et al. Energy absorption in composite stiffeners , 1995 .
[16] Elmar Beeh,et al. Super Light Car—lightweight construction thanks to a multi-material design and function integration , 2009 .
[17] Nancy L. Johnson,et al. Development of a Cost Competitive, Composite Intensive, Body-in-White , 2002 .
[18] Lorenzo Iannucci,et al. Physically-based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking: Part I: Development , 2006 .
[19] Sathya Hanagud,et al. Energy Absorption Behavior of Graphite Epoxy Composite Sine Webs , 1989 .
[20] José Daniel D. Melo,et al. The effect of processing conditions on the energy absorption capability of composite tubes , 2008 .
[21] Chiara Bisagni,et al. Progressive crushing of fiber-reinforced composite structural components of a Formula One racing car , 2005 .
[22] Z. Hashin. Failure Criteria for Unidirectional Fiber Composites , 1980 .
[23] Lorenzo Iannucci,et al. Fracture toughness of the tensile and compressive fibre failure modes in laminated composites , 2006 .
[24] Abdel Magid Hamouda,et al. Energy absorption capabilities of woven roving glass/epoxy composite tubes: Effect of tube length , 2005 .
[25] D. Adams,et al. Crush Initiators for Increased Energy Absorption in Composite Sandwich Structures , 2008 .
[26] H. Hamada,et al. Energy Absorption Capability of 3D Braided-Textile Composite Tubes with Rectangular Cross Section , 2007 .
[27] R. Vaziri,et al. A Constitutive Model for Progressive Compressive Failure of Composites , 2008 .
[28] Paul Wood,et al. Strain Rate Testing of Metallic Materials and their Modelling for use in CAE based Automotive Crash Simulation Tools : Recommendations and Procedures , 2009 .
[29] Alastair Johnson,et al. CMH-17 Crashworthiness WG: Round Robin Simulation of Crash Elements , 2009 .
[30] P. H. Thornton,et al. Energy Absorption in Composite Structures , 1979 .
[31] T. A. Turner,et al. Effects of boundary conditions on the energy absorption of thin-walled polymer composite tubes under axial crushing , 2008 .
[32] Stephen W. Tsai,et al. A General Theory of Strength for Anisotropic Materials , 1971 .
[33] Cornelius Herstatt,et al. Crash simulation evolution and its impact on R&D in the automotive applications , 2009 .
[34] J. M. Starbuck,et al. Crashworthiness of Automotive Composite Material Systems , 2004 .
[35] Anthony K. Pickett,et al. Manuscript Draft Manuscript Number: JCOMA-05-389R1 Title: Modelling damage and failure in carbon/epoxy Non Crimp Fabric composites including effects of fabric pre-shear , 2005 .
[36] Paolo Feraboli,et al. Development of a Corrugated Test Specimen for Composite Materials Energy Absorption , 2008 .
[37] G. Fernlund,et al. Fracture of discontinuous wood-adhesive bonds , 2003 .
[38] Xinran Xiao. Simulation of Composite Tubes Axial Impact with a Damage Mechanics Based Composite Material Model , 2008 .
[39] J. M. Starbuck,et al. Energy Absorption in Polymer Composites for Automotive Crashworthiness , 2002 .
[40] A. Mariño. Regulation of Performance Standards versus Equipment Specification with Asymmetric Information , 1998 .
[41] M. Finn,et al. High strain rate tensile testing of automotive aluminum alloy sheet , 2005 .
[42] J. Carruthers,et al. Energy Absorption Capability and Crashworthiness of Composite Material Structures: A Review , 1998 .
[43] G. L. Farley,et al. Crushing Characteristics of Continuous Fiber-Reinforced Composite Tubes , 1992 .
[44] R. E. Robertson,et al. Comparison of bevel and tulip triggered pultruded tubes for energy absorption , 1991 .
[45] S. Hanagud,et al. Crashworthy behavior of graphite/epoxy composite sine wave webs , 1991 .
[46] Aviva Brecher,et al. A Safety Roadmap for Future Plastics and Composites Intensive Vehicles , 2007 .
[47] J. M. Starbuck,et al. Evaluating the Rate-Dependent Fracture Toughness of an Automotive Adhesive , 2008 .
[48] K. Devries,et al. Chapter 6 – Mechanical testing of adhesive joints , 2002 .
[49] J N Dang. PRELIMINARY RESULTS ANALYZING THE EFFECTIVENESS OF ELECTRONIC STABILITY CONTROL (ESC) SYSTEMS , 2004 .
[50] Paolo Feraboli,et al. Development of a Modified Flat-plate Test Specimen and Fixture for Composite Materials Crush Energy Absorption , 2009 .
[51] Sanjay Patel,et al. Characterizing and Enhancing the Safety of Future Plastic and Composite Intensive Vehicles (PCIVs) , 2009 .
[52] T. Gholami,et al. Crashworthiness Simulation of Automobiles with ABAQUS / Explicit , 2003 .
[53] Paul J. Hogg,et al. Investigation of plate geometry on the crushing of flat composite plates , 2006 .
[54] F. Chang,et al. A Progressive Damage Model for Laminated Composites Containing Stress Concentrations , 1987 .
[55] John Morton,et al. An Evaluation of the Energy Absorption of Laminated Composite Plates , 1995 .
[56] M. B. Ioannidis,et al. Crashworthiness of Composite Thin-Walled Structures , 1998 .
[57] J A. Lavoie,et al. A crush test fixture for investigating energy arsorption of flat composite plates , 1994 .
[58] Anthony J. Vizzini,et al. Testing Methods for Energy Absorption of Kevlar/Epoxy , 1999 .
[59] G. Savage,et al. Formula 1 Composites Engineering , 2010 .
[60] John B. Heywood,et al. Factor of two : halving the fuel consumption of new U.S. Automobiles by 2035 , 2008 .