Cure progress in epoxy systems: dependence on temperature and time

Abstract. We have developed an analytical formula for the cure progress of epoxy systems as a function of both time t and temperature T. Complex viscosity η* or the storage modulus G′ are used as the measures of the cure progress. The equation is based on the shape of the isothermal viscosity vs. time curves typically found for thermoset systems; temperature dependence of the isothermal parameters is established, resulting in a single equation. The equation has been tested for two vastly different thermoset epoxy systems and found to provide reliable predictive capabilities. The equation seems applicable for predicting curing progress of most thermoset systems, without a limitation to epoxies. Moreover, the equation can be used for discriminating accurate experimental results from less accurate ones.

[1]  Grundlagen der chemischen Kinetik , 1974 .

[2]  H. Kehlen, F. Kuschel und H. Sackmann: Grundlagen der chemischen Kinetik. Akademie‐Verlag, Berlin 1974. 196 Seiten, Preis: M 8.—. , 1977 .

[3]  J. Vergnaud,et al.  Modelling of the Cure of Epoxide Resin in Long Cylindrical Samples , 1987 .

[4]  Organic Chemistry: A Brief Course , 1989 .

[5]  Application of Mechanistic Chemical Kinetics to Thermoset Composites Processing , 1989 .

[6]  George S. Springer,et al.  Autoclave Curing — Comparisons of Model and Test Results , 1992 .

[7]  H. Yasuda,et al.  The influence of short branches on the α, β and γ‐relaxation processes of ultra‐high strength polyethylene fibers , 1994 .

[8]  D. Feldman,et al.  Synthetic Polymers: Technology, properties, applications , 1996 .

[9]  Temperature and Cure in Pultruded Composites Using Multi-Step Reaction Model for Resin , 1996 .

[10]  K. Menard.  Dynamic Mechanical Analysis: A Practical Introduction , 1997 .

[11]  W. Brostow,et al.  Peroxy derivatives of epoxy resins based on bisphenol A: Effects of quaternary ammonium salts , 1999 .

[12]  W. Brostow,et al.  Synthesis and prperties of peroxy derivatives of epoxy resins based on Bisphenol A. 1. Effects of the presence of inorganic bases , 1999 .

[13]  Witold Brostow,et al.  Performance of Plastics , 2000 .

[14]  D. E. Kirkpatrick,et al.  Poly(hydroxyaminoethers): A New Family of Epoxy‐Based Thermoplastics , 2000 .

[15]  W. Brostow,et al.  Synthesis and properties of peroxy derivatives of phenol – formaldehyde resins , 2000 .

[16]  Rui L. Reis,et al.  Viscoelastic behaviour and time–temperature correspondence of HDPE with varying levels of process-induced orientation , 2001 .

[17]  E. Andrzejewska.  Photopolymerization kinetics of multifunctional monomers , 2001 .

[18]  T. Hayashi,et al.  Polymerization of epoxy resins studied by positron annihilation , 1999 .

[19]  W. Brostow,et al.  Fluoropolymer addition to an epoxy : phase inversion and tribological properties , 2001 .

[20]  B. Bilyeu,et al.  Separation of gelation from vitrification in curing of a fiber-reinforced epoxy composite , 2002 .

[21]  W. Brostow,et al.  Functional peroxides and peroxy oligoesters on the basis of pyromellitic dianhydride , 2002 .

[22]  W. Brostow,et al.  Synthesis and properties of peroxy derivatives of epoxy resins based on Bisphenol A: Effects of the presence of boron trifluoride ethereate , 2002 .

[23]  W. Brostow,et al.  Crosslinking agents of unsaturated polymers: evaluation of the agent efficiency , 2002 .

[24]  W. Brostow,et al.  Effects of fluoropolymer addition to an epoxy on scratch depth and recovery , 2002 .