The Characterization of Nanocrystalline Dye-Sensitized Solar Cells with Flexible Metal Substrates by Electrochemical Impedance Spectroscopy

Metal substrates are excellent alternatives to conducting plastic substrates in flexible solar cells because of the possible sintering process at high temperature. However, the investigation of cells with flexible metal substrates has only recently started with titanium, tungsten, and stainless steel. It was found that they formed semiconductor oxides after the sintering process. In this paper, we probed the properties of dye sensitized solar cells with the metal substrates prepared in three different ways-a bare metal sheet, indium tin oxide (ITO) sputter coating on a bare metal sheet, and ITO sputter coating after the addition of a SiO x layer on the metal sheet. The best cell efficiency was obtained from the cell with bare Ti because it formed a TiO 2 layer which was identical to the main working electrode. When an ITO layer was added, fill factors (FFs) increased for W and SUS 304 and FF decreased for Ti; the addition of a SiO x layer led to a short circuit current increase and FF decrease. Electrochemical impedance spectroscopy was taken and analyzed to characterize the resistance element in each circuit, and the corresponding effects were discussed. A new impedance element resulting from the SiO x insulating layer was classified from electrochemical impedance spectroscopic data.

[1]  Takehito Mitate,et al.  Modeling of an equivalent circuit for dye-sensitized solar cells , 2004 .

[2]  A New Ionic Liquid for a Redox Electrolyte of Dye-Sensitized Solar Cells , 2004 .

[3]  P. Falaras,et al.  Preparation, characterization and photocatalytic activity of nanocrystalline thin film TiO2 catalysts towards 3,5-dichlorophenol degradation , 2002 .

[4]  Joachim Luther,et al.  Modeling and interpretation of electrical impedance spectra of dye solar cells operated under open-circuit conditions , 2002 .

[5]  Anders Hagfeldt,et al.  A new method to make dye-sensitized nanocrystalline solar cells at room temperature , 2001 .

[6]  Michael Grätzel,et al.  Applications of functionalized transition metal complexes in photonic and optoelectronic devices , 1998 .

[7]  A. J. Frank,et al.  Influence of Electrical Potential Distribution, Charge Transport, and Recombination on the Photopotential and Photocurrent Conversion Efficiency of Dye-Sensitized Nanocrystalline TiO2 Solar Cells: A Study by Electrical Impedance and Optical Modulation Techniques , 2000 .

[8]  M. Grätzel.  Corrigendum to “Conversion of sunlight to electric power by nanocrystalline dye-sensitized solar cells” [J. Photochem. Photobiol. A: Chem. 164 (2004) 3–14] , 2004 .

[9]  D. Gorse,et al.  A photoelectrochemical and ac impedance study of anodic titanium oxide films , 1998 .

[10]  Tsutomu Miyasaka,et al.  Low-Temperature Fabrication of Dye-Sensitized Plastic Electrodes by Electrophoretic Preparation of Mesoporous TiO2 Layers , 2004 .

[11]  Tsutomu Miyasaka,et al.  Low temperature preparation of mesoporous TiO2 films for efficient dye-sensitized photoelectrode by chemical vapor deposition combined with UV light irradiation , 2004 .

[12]  M. A. Hernández-Fenollosa,et al.  New low-temperature preparation method of the TiO2 porous photoelectrode for dye-sensitized solar cells using UV irradiation , 2005 .

[13]  Man Gu Kang,et al.  Dye-Sensitized TiO2 Solar Cells Using Polymer Gel Electrolytes Based on PVdF-HFP , 2004 .

[14]  KangMan Gu,et al.  Flexible Metallic Substrates for TiO2 Film of Dye-sensitized Solar Cells , 2005 .

[15]  Ashraful Islam,et al.  Modeling of an equivalent circuit for dye-sensitized solar cells : improvement of efficiency of dye-sensitized solar cells by reducing internal resistance , 2006 .

[16]  Anders Hagfeldt,et al.  Optimization of dye-sensitized solar cells prepared by compression method , 2002 .

[17]  S. Haque,et al.  Flexible dye sensitised nanocrystalline semiconductor solar cells. , 2003, Chemical communications.

[18]  Marco-A. De Paoli,et al.  Solid-State and Flexible Dye-Sensitized TiO2 Solar Cells: a Study by Electrochemical Impedance Spectroscopy , 2002 .

[19]  Greg P. Smestad,et al.  Education and solar conversion:: Demonstrating electron transfer , 1998 .

[20]  Satoshi Uchida,et al.  Flexible dye-sensitized solar cells by 28 GHz microwave irradiation , 2004 .

[21]  C. Brabec,et al.  Fabrication of large area photovoltaic devices containing various blends of polymer and fullerene derivatives by using the doctor blade technique , 2000 .

[22]  Polycarpos Falaras,et al.  Sensitization of TiO2 by Polypyridine Dyes Role of the Electron Donor , 2003 .

[23]  H. Kung,et al.  SEMICONDUCTING OXIDE ANODES IN PHOTOASSISTED ELECTROLYSIS OF WATER. , 1977 .

[24]  Anders Hagfeldt,et al.  Light-Induced Redox Reactions in Nanocrystalline Systems , 1995 .

[25]  Man Gu Kang,et al.  A 4.2% efficient flexible dye-sensitized TiO2 solar cells using stainless steel substrate , 2006 .

[26]  Michael Dürr,et al.  Low-temperature fabrication of dye-sensitized solar cells by transfer of composite porous layers , 2005, Nature materials.