Ultrahigh strength as-extruded Mg–10.3Zn–6.4Y–0.4Zr–0.5Ca alloy containing W phase

[1]  I. Golovin,et al.  Effect of microalloying with Ca on the microstructure and mechanical properties of Mg-6 mass%Zn alloys , 2016 .

[2]  Q. Le,et al.  Effects of phase composition and content on the microstructures and mechanical properties of high strength Mg–Y–Zn–Zr alloys , 2015 .

[3]  Dingfei Zhang,et al.  Hot deformation and processing map of an as-extruded Mg–Zn–Mn–Y alloy containing I and W phases , 2015 .

[4]  M. Zheng,et al.  Development of high-strength, low-cost wrought Mg–2.5 mass% Zn alloy through micro-alloying with Ca and La , 2015 .

[5]  M. Gupta,et al.  Development of high-performance quaternary LPSO Mg–Y–Zn–Al alloys by Disintegrated Melt Deposition technique , 2015 .

[6]  Chao Xu,et al.  Improving strength and ductility of Mg–Gd–Y–Zn–Zr alloy simultaneously via extrusion, hot rolling and ageing , 2015 .

[7]  W. Kim,et al.  Refinement of the icosahedral quasicrystalline phase and the grain size of Mg–9.25Zn–1.66Y alloy by high-ratio differential speed rolling , 2015 .

[8]  M. Sanjari,et al.  Role of RE in the deformation and recrystallization of Mg alloy and a new alloy design concept for Mg–RE alloys , 2015 .

[9]  F. Pan,et al.  Microstructure, electromagnetic shielding effectiveness and mechanical properties of Mg–Zn–Y–Zr alloys , 2015 .

[10]  Yanbo Wang,et al.  Investigation of high-strength and superplastic Mg–Y–Gd–Zn alloy , 2014 .

[11]  Nack J. Kim,et al.  Current issues in magnesium sheet alloys: Where do we go from here? , 2014 .

[12]  Zhao-hui Wang,et al.  Microstructure, texture and mechanical properties of as-extruded Mg–Zn–Er alloys containing W-phase , 2014 .

[13]  Baoping Zhang,et al.  Effect of Ca addition on the microstructure and tensile properties of Mg–4.0Zn–2.0Gd alloys , 2014 .

[14]  Hongyun Luo,et al.  Effect of H2S partial pressure on the tensile properties of A350LF2 steel in the absence and presence of pre-immersion , 2014 .

[15]  W. Gan,et al.  Role of multi-microalloying by rare earth elements in ductilization of magnesium alloys , 2014 .

[16]  Zilong Zhao,et al.  Microstructure and corrosion behavior of Mg–Zn–Y–Al alloys with long-period stacking ordered structures , 2014 .

[17]  Xuan-pu Dong,et al.  Effects of heat treatment on microstructure, mechanical properties and damping capacity of Mg–Zn–Y–Zr alloy , 2014 .

[18]  A. Singh,et al.  Development of Very High Strength and Ductile Dilute Magnesium Alloys by Dispersion of Quasicrystal Phase , 2014, Metallurgical and Materials Transactions A.

[19]  P. Čížek,et al.  Precipitate characteristics and their effect on the prismatic-slip-dominated deformation behaviour of an Mg–6 Zn alloy , 2013 .

[20]  J. Nie.  Precipitation and Hardening in Magnesium Alloys , 2012, Metallurgical and Materials Transactions A.

[21]  W. Ding,et al.  Microstructure, mechanical properties, biocorrosion behavior, and cytotoxicity of as-extruded Mg-Nd-Zn-Zr alloy with different extrusion ratios. , 2012, Journal of the mechanical behavior of biomedical materials.

[22]  Xuefeng Guo,et al.  High strength magnesium alloy with α-Mg and W-phase processed by hot extrusion , 2011 .

[23]  B. Xiao,et al.  Achieving high strain rate superplasticity in Mg–Zn–Y–Zr alloy produced by friction stir processing , 2011 .

[24]  Shouren Wang,et al.  Precipitates effect on microstructure of as-deformed and as-annealed AZ41 magnesium alloys by adding Mn and Ca , 2011 .

[25]  J. Nie,et al.  Development of high-strength magnesium alloys via combined processes of extrusion, rolling and ageing , 2011 .

[26]  A. Singh,et al.  Ultra-fine grain size and isotropic very high strength by direct extrusion of chill-cast Mg–Zn–Y alloys containing quasicrystal phase , 2011 .

[27]  Kazuhiro Hono,et al.  Towards the development of heat-treatable high-strength wrought Mg alloys , 2010 .

[28]  N. Gao,et al.  PREDICTING GRAIN REFINEMENT BY COLD SEVERE PLASTIC DEFORMATION IN ALLOYS USING VOLUME AVERAGED DISLOCATION GENERATION , 2009 .

[29]  T. Ohkubo,et al.  Bimodally grained microstructure development during hot extrusion of Mg–2.4 Zn–0.1 Ag–0.1 Ca–0.16 Zr (at.%) alloys , 2009 .

[30]  S. Kamado,et al.  Fabrication of extraordinary high-strength magnesium alloy by hot extrusion , 2009 .

[31]  E. Mora,et al.  High-strength Mg-Zn-Y alloys produced by powder metallurgy , 2009 .

[32]  J. Robson,et al.  Particle effects on recrystallization in magnesium―manganese alloys: Particle―stimulated nucleation , 2009 .

[33]  Z. H. Huang,et al.  Solidification pathways and constituent phases of Mg-Zn-Y-Zr alloys , 2009 .

[34]  C. H. Cáceres,et al.  Strain hardening behaviour and the Taylor factor of pure magnesium , 2008 .

[35]  G. Garcés,et al.  Grain refinement of Mg–Zn–Y alloy reinforced by an icosahedral quasicrystalline phase by severe hot rolling , 2007 .

[36]  Daokui Xu,et al.  Effect of Y concentration on the microstructure and mechanical properties of as-cast Mg–Zn–Y–Zr alloys , 2007 .

[37]  J. Nie,et al.  Characterization of strengthening precipitate phases in a Mg–Zn alloy , 2007 .

[38]  O. Ruano,et al.  Influence of texture and grain size on work hardening and ductility in magnesium-based alloys processed by ECAP and rolling , 2006 .

[39]  Do hyung Kim,et al.  Effects of Zn / Y ratio on microstructure and mechanical properties of Mg-Zn-Y alloys , 2005 .

[40]  Y. Kawamura,et al.  Mechanical properties of warm-extruded Mg¿Zn¿Gd alloy with coherent 14H long periodic stacking ordered structure precipitate , 2005 .

[41]  M. Starink,et al.  Estimation of dislocation densities in cold rolled Al‐Mg‐Cu‐Mn alloys by combination of yield strength data, EBSD and strength models , 2005, Journal of microscopy.

[42]  Yanping Zhu,et al.  Effects of yttrium on microstructure and mechanical properties of hot-extruded Mg–Zn–Y–Zr alloys , 2004 .

[43]  J. Nie.  Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys , 2003 .

[44]  D. Bae,et al.  Deformation behavior of Mg–Zn–Y alloys reinforced by icosahedral quasicrystalline particles , 2002 .

[45]  W. Blum,et al.  Microstructural Evolution during Creep of the Mg-Al-Alloy AZ91hp , 1999 .

[46]  W. Blum,et al.  Changes in Microstructure and Deformation Resistance during Creep of the Die-Cast Mg-Al-Base Alloy AZ91hp at Intermediate Temperatures up to 150 °C , 1999 .

[47]  F. J. Humphreys,et al.  Recrystallization and Related Annealing Phenomena , 1995 .