Dynamic characterization, modelling and model updating of a lively footbridge

This paper presents finite element analyses, experimental measurements and finite element model updating of a lively footbridge consisting on an arched main span 40m long and several shorter access spans. Firstly, a finite element model of the bridge is created in a commercial CAE software and static and modal response are numerically estimated. Then, experimental measurements using static loading test and ambient vibration tests are performed. Initial finite element model is adjusted to match with the static response by fitting some selected parameters. Modal parameters (natural frequencies, mode shapes and modal damping) are extracted and after that the current finite element model is updated. Among the selected parameters, semi-rigid connections in some joints, concrete Young’s modulus and mass density of the concrete deck (to account on pavement mass) are selected to minimize the differences between numerical and experimental structural response. Sensitivity of the modal response to these parameters is also shown. At the end of the study, good agreement between analytical and experimental results is achieved, revealing the suitability of the entire process.

[1]  Youn-sik Park,et al.  An improved updating parameter selection method and finite element model update using multiobjective optimisation technique , 2004 .

[2]  Qiusheng Li,et al.  Finite element model updating for a high-rise structure based on ambient vibration measurements , 2004 .

[3]  M. Imregun,et al.  A review of model updating techniques , 1991 .

[4]  Wei-Ming Li,et al.  New iterative method for model updating based on model reduction , 2011 .

[5]  T. K. Kundra,et al.  Studies in dynamic design using updated models , 2005 .

[6]  Adam J Crewe,et al.  Finite element model updating of a small scale bridge , 2003 .

[7]  Temel Türker,et al.  Modal testing and finite element model calibration of an arch type steel footbridge , 2007 .

[8]  John E. Mottershead,et al.  Model Updating In Structural Dynamics: A Survey , 1993 .

[9]  Raimundo Delgado,et al.  Finite element model updating of a bowstring-arch railway bridge based on experimental modal parameters , 2012 .

[10]  Paul Reynolds,et al.  Modal testing and FE model tuning of a lively footbridge structure , 2006 .

[11]  Boris A. Zárate,et al.  Finite element model updating: Multiple alternatives , 2008 .

[12]  John E. Mottershead,et al.  Finite Element Model Updating in Structural Dynamics , 1995 .

[13]  Paul Reynolds,et al.  Finite element modelling and updating of a lively footbridge: The complete process , 2007 .

[14]  Aleksandar Pavic,et al.  Updating of the Analytical Models of Two Footbridges Based on Modal Testing of Full-Scale Structures , 1998 .