A preliminary study on the efficiency of the steel slag-based spraying carbonation layer in improving the durability of cement-based products
暂无分享,去创建一个
Fazhou Wang | Yongjia He | Linnu Lu | S. Hu | G. Deng | Shu-guang Hu | Lin-nu Lu
[1] Fazhou Wang,et al. Investigation of sulfate attack on aluminum phases in cement-metakaolin paste , 2022, Journal of Building Engineering.
[2] Yuan Qin,et al. Effect of fly ash on mechanical properties and microstructure of cellulose fiber-reinforced concrete under sulfate dry–wet cycle attack , 2021 .
[3] Qifeng Song,et al. Use of steel slag as sustainable construction materials: A review of accelerated carbonation treatment , 2021 .
[4] Haiming Li,et al. Recent advances in cellulose and its derivatives for oilfield applications. , 2021, Carbohydrate polymers.
[5] F. Zhou,et al. Effect of steam curing regimes on temperature and humidity gradient, permeability and microstructure of concrete , 2021 .
[6] Christopher R. Shearer,et al. Improving the sulfate attack resistance of concrete by using supplementary cementitious materials (SCMs): A review , 2021 .
[7] Min Deng,et al. Effects of ethylenediamine tetra-acetic acid (EDTA) on the accelerated carbonation and properties of artificial steel slag aggregates , 2021 .
[8] Jun Chang,et al. Effects of pozzolanic reaction on carbonation degree and strength of steel slag compacts containing zeolite , 2021 .
[9] C. Shi,et al. Chloride migration in cement mortars with ultra-low water to binder ratio , 2021 .
[10] Zaid Ghouleh,et al. Improving concrete resistance to low temperature sulfate attack through carbonation curing , 2021 .
[11] Jiaxiang Liu,et al. Carbon sequestration of steel slag and carbonation for activating RO phase , 2021 .
[12] M. Santhanam,et al. The effect of specimen size on deterioration due to external sodium sulphate attack in full immersion studies , 2020 .
[13] Deju Zhu,et al. A review on the deterioration and approaches to enhance the durability of concrete in the marine environment , 2020 .
[14] N. Banthia,et al. Hydration and soundness properties of phosphoric acid modified steel slag powder , 2020 .
[15] Jingpei Li,et al. Experimental study on performance of cast-in-situ recycled aggregate concrete under different sulfate attack exposures , 2020 .
[16] Zhichao Liu,et al. Effect of chitosan on the carbonation behavior of γ-C2S , 2020 .
[17] Wajahat Sammer Ansari,et al. The effects of carbonation and hydration on the mineralogy and microstructure of basic oxygen furnace slag products , 2019 .
[18] Jun Chang,et al. Changes in mineral composition, growth of calcite crystal, and promotion of physico-chemical properties induced by carbonation of β-C2S , 2019 .
[19] A. Mukherjee,et al. Protection of concrete structures under sulfate environments by using calcifying bacteria , 2019, Construction and Building Materials.
[20] C. Shi,et al. Properties and microstructure of CO2 surface treated cement mortars with subsequent lime-saturated water curing , 2019, Cement and Concrete Composites.
[21] Fazhou Wang,et al. The effect of curing regimes on the mechanical properties, nano-mechanical properties and microstructure of ultra-high performance concrete , 2019, Cement and Concrete Research.
[22] S. Cavalaro,et al. The role of porosity in external sulphate attack , 2019, Cement and Concrete Composites.
[23] Xiaoguang Jin,et al. Long-term behaviors of concrete under low-concentration sulfate attack subjected to natural variation of environmental climate conditions , 2019, Cement and Concrete Research.
[24] Shen Wang,et al. Sulfate resistance of steam cured ferronickel slag blended cement mortar , 2019, Cement and Concrete Composites.
[25] João Castro-Gomes,et al. CO2 activated steel slag-based materials: A review , 2019, Journal of Cleaner Production.
[26] Li Jun,et al. Resistance to sulfate attack of magnesium phosphate cement-coated concrete , 2019, Construction and Building Materials.
[27] Linhua Jiang,et al. Evaluation of sulfate resistance of slag contained concrete under steam curing , 2019, Construction and Building Materials.
[28] Jiaping Liu,et al. Pore structure characterization of early-age cement pastes blended with high-volume fly ash , 2018, Construction and Building Materials.
[29] S. Pan,et al. Characteristics of steel slags and their use in cement and concrete—A review , 2018, Resources, Conservation and Recycling.
[30] Peng Liu,et al. Self-assembly of honeycomb-like calcium-aluminum-silicate-hydrate (C-A-S-H) on ceramsite sand and its application in photocatalysis , 2018, Chemical Engineering Journal.
[31] D. W. Bousfield,et al. Cellulose nanofiber/carboxymethyl cellulose blends as an efficient coating to improve the structure and barrier properties of paperboard , 2017, Cellulose.
[32] Tung-Chai Ling,et al. A review on surface treatment for concrete – Part 2: Performance , 2017 .
[33] Tung-Chai Ling,et al. A review on concrete surface treatment Part I: Types and mechanisms , 2017 .
[34] Fazhou Wang,et al. Internal curing – A suitable method for improving the performance of heat-cured concrete , 2016 .
[35] M. Zain,et al. Durability of mortar and concrete made up of pozzolans as a partial replacement of cement: A review , 2016 .
[36] C. Andrade,et al. Recent durability studies on concrete structure , 2015 .
[37] Zhang Weidong,et al. The investigation of factors affecting the water impermeability of inorganic sodium silicate-based concrete sealers , 2015 .
[38] B. Pang,et al. Utilization of carbonated and granulated steel slag aggregate in concrete , 2015 .
[39] Jialai Wang,et al. Surface treatment of concrete bricks using calcium carbonate precipitation , 2015 .
[40] Xin Cheng,et al. Characteristics of surface-treatment of nano-SiO2 on the transport properties of hardened cement pastes with different water-to-cement ratios , 2015 .
[41] A. Soliman,et al. Investigation of concrete exposed to dual sulfate attack , 2014 .
[42] Xin Cheng,et al. Effects and mechanisms of surface treatment of hardened cement-based materials with colloidal nanoSiO2 and its precursor , 2014 .
[43] Maria Vittoria Diamanti,et al. Effect of polymer modified cementitious coatings on water and chloride permeability in concrete , 2013 .
[44] Carlo Pistolesi,et al. Ethyl silicate for surface protection of concrete: Performance in comparison with other inorganic surface treatments , 2013 .
[45] W. Müllauer,et al. Sulfate attack expansion mechanisms , 2013 .
[46] Yanbin Yao,et al. Comparison of low-field NMR and mercury intrusion porosimetry in characterizing pore size distributions of coals , 2012 .
[47] Ignacio Carol,et al. Chemo-mechanical analysis of concrete cracking and degradation due to external sulfate attack: A meso-scale model , 2011 .
[48] Y. Shao,et al. Carbonation Curing of Slag-Cement Concrete for Binding CO2 and Improving Performance , 2010 .
[49] Sankaran Mahadevan,et al. Numerical simulation of cementitious materials degradation under external sulfate attack , 2010 .
[50] Jian-Guo Dai,et al. Water repellent surface impregnation for extension of service life of reinforced concrete structures in marine environments: The role of cracks , 2010 .
[51] W. Verstraete,et al. Microbial carbonate precipitation in construction materials: A review , 2010 .
[52] Edgardo F. Irassar,et al. Sulfate attack on cementitious materials containing limestone filler — A review , 2009 .
[53] Nele De Belie,et al. Bacterial carbonate precipitation improves the durability of cementitious materials , 2008 .
[54] Nele De Belie,et al. Bacterial carbonate precipitation as an alternative surface treatment for concrete , 2008 .
[55] Frank Winnefeld,et al. Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes , 2007 .
[56] A. Neville. THE CONFUSED WORLD OF SULFATE ATTACK ON CONCRETE , 2004 .
[57] Omar S. Baghabra Al-Amoudi,et al. Effectiveness of surface coatings in improving concrete durability , 2003 .
[58] C. T. Tam,et al. Steam-cured concrete incorporating mineral admixtures , 2003 .
[59] Jan Olek,et al. Sulfate attack research — whither now? , 2001 .