System reliability approach to rock slope stability

A systematic quantitative methodology for the reliability analysis of stability of rock slopes is presented. A sliding mass resting on an inclined plane and composed of two blocks separated by a vertical tension crack is considered, and a disjoint cut-set system formulation is proposed, with each cut-set corresponding to a different failure mode of the slope. Methods for the evaluation of the system reliability problem are discussed and applied to solve an example problem. Monte Carlo simulation method may be used to obtain the ‘‘exact’’ solution, at the expense of a higher computational cost, while methods based on first order approximations are found to be computationally efficient and to provide information of interest for the design process, but they are also shown not to be particularly accurate in some cases. The results also show that reliability bounds based on linear programming provide a flexible way of estimating the range of possible failure probabilities, and that accurate estimations of the probability of failure are obtained when sufficient information is considered. r 2006 Elsevier Ltd. All rights reserved.

[1]  Yasuo Yabe,et al.  International Journal of Rock Mechanics and Mining Sciences , 1964, Nature.

[2]  E. Kounias.  Bounds for the Probability of a Union, with Applications , 1968 .

[3]  Peter Lumb.  Statistics and Probability in Civil Engineering , 1973 .

[4]  O. Ditlevsen.  Generalized Second Moment Reliability Index , 1979 .

[5]  O. Ditlevsen.  Narrow Reliability Bounds for Structural Systems , 1979 .

[6]  R. Rackwitz,et al.  Non-Normal Dependent Vectors in Structural Safety , 1981 .

[7]  Richard E. Goodman,et al.  Block theory and its application to rock engineering , 1985 .

[8]  A. Kiureghian,et al.  STRUCTURAL RELIABILITY UNDER INCOMPLETE PROBABILITY INFORMATION , 1986 .

[9]  Herbert H. Einstein,et al.  Characterizing rock joint geometry with joint system models , 1988 .

[10]  P. Bjerager.  Probability Integration by Directional Simulation , 1988 .

[11]  Steen Krenk,et al.  Parametric Sensitivity in First Order Reliability Theory , 1989 .

[12]  Tien H. Wu,et al.  System reliability of slope stability , 1990 .

[13]  P. Bjerager.  On computation methods for structural reliability analysis , 1990 .

[14]  A. Kiureghian,et al.  Optimization algorithms for structural reliability , 1991 .

[15]  C. Sagaseta,et al.  Mechanics of jointed and faulted rock , 1992 .

[16]  E. T. Brown,et al.  Maximum likelihood estimation of joint size from trace length measurements , 1992 .

[17]  John A. Hudson,et al.  ROCK ENGINEERING SYSTEMS. THEORY AND PRACTICE , 1992 .

[18]  Dae S. Young.  Probabilistic slope analysis for structural failure , 1993 .

[19]  Stephen D. Priest,et al.  The Collection and Analysis of Discontinuity Orientation Data for Engineering Design, with Examples , 1993 .

[20]  Yong Cang Zhang.  High-order reliability bounds for series systems and application to structural systems , 1993 .

[21]  J. Christian,et al.  Reliability Applied to Slope Stability Analysis , 1994 .

[22]  R. Goodman.  Block theory and its application , 1995 .

[23]  R. N. Chowdhury,et al.  Geotechnical system reliability of slopes , 1995 .

[24]  M. Mauldon.  Keyblock probabilities and size distributions: A first model for impersistent 2-D fractures , 1995 .

[25]  Herbert H. Einstein.  Risk and risk analysis in rock engineering , 1996 .

[26]  Henrik O. Madsen,et al.  Structural Reliability Methods , 1996 .

[27]  P. Kulatilake,et al.  Box fractal dimension as a measure of statistical homogeneity of jointed rock masses , 1997 .

[28]  Bak Kong Low,et al.  Reliability Analysis of Rock Wedges , 1997 .

[29]  Robert B. Gilbert,et al.  SLOPE RELIABILITY ANALYSIS USING GENERALIZED METHOD OF SLICES , 1998 .

[30]  M. Mauldon,et al.  Estimating Mean Fracture Trace Length and Density from Observations in Convex Windows , 1998 .

[31]  A. Der Kiureghian,et al.  Multinormal probability by sequential conditioned importance sampling : theory and application , 1998 .

[32]  Lianyang Zhang,et al.  Estimating the Mean Trace Length of Rock Discontinuities , 1998 .

[33]  J. S. Kuszmaul.  Estimating keyblock sizes in underground excavations: accounting for joint set spacing , 1999 .

[34]  Jiachen Wang,et al.  Reliability analysis of an open pit coal mine slope , 2000 .

[35]  Lianyang Zhang,et al.  Estimating the intensity of rock discontinuities , 2000 .

[36]  W. Godwin.  Article in Press , 2000 .

[37]  Chung-In Lee,et al.  Estimation of joint length distribution using window sampling , 2001 .

[38]  J. Christian,et al.  The point‐estimate method with large numbers of variables , 2002 .

[39]  P. R. La Pointe,et al.  Derivation of parent fracture population statistics from trace length measurements of fractal fracture populations , 2002 .

[40]  P Starzec,et al.  Application of two-level factorial design to sensitivity analysis of keyblock statistics from fracture geometry , 2002 .

[41]  Herbert H. Einstein,et al.  Geologic Stochastic Modeling and Connectivity Assessment of Fracture Systems in the Boston Area , 2002 .

[42]  H. S. B. Duzgun,et al.  A Methodology for Reliability-Based Design of Rock Slopes , 2003 .

[43]  Junho Song,et al.  Bounds on System Reliability by Linear Programming , 2003 .

[44]  M. E. Galassi,et al.  GNU SCIENTI C LIBRARY REFERENCE MANUAL , 2005 .

[45]  W. J. Roberds,et al.  A risk-based approach for the design of rock slopes subject to multiple failure modes - illustrated by a case study in Hong Kong , 2005 .

[46]  J. M. Rubin.  Reliability and Optimization of Structural Systems , 2006 .