Bendable polymer electrolyte fuel cell using highly flexible Ag nanowire percolation network current collectors

This study reports a polymer electrolyte fuel cell based on polydimethylsiloxane coated with a flexible current-collecting layer of Ag nanowire percolation networks. The reactive area of the bendable fuel cell was 9 cm2 and showed the maximum absolute power of 639 mW (the power density was 71 mW cm−2) under various bending conditions. Impedance spectra of the operating cell revealed that ohmic and Faradaic resistances decreased under the bent condition. Overall, the degree of bending improves the cell performances. The structural modeling result showed that decrease of the resistance and corresponding performance enhancement were due to the increased compressive force normal to the membrane electrode assembly, which was investigated through finite element simulation of the stress within the bendable fuel cell.

[1]  Wei Lv,et al.  Flexible and planar graphene conductive additives for lithium-ion batteries , 2010 .

[2]  Gerhard Tröster,et al.  Wearable Electronics: Woven Electronic Fibers with Sensing and Display Functions for Smart Textiles (Adv. Mater. 45/2010) , 2010 .

[3]  S. Ko,et al.  Highly Stretchable and Highly Conductive Metal Electrode by Very Long Metal Nanowire Percolation Network , 2012, Advanced materials.

[4]  M. Nathan,et al.  Advanced materials for the 3D microbattery , 2006 .

[5]  Tetsuya Osaka,et al.  Bendable fuel cells: on-chip fuel cell on a flexible polymer substrate , 2009 .

[6]  Yi Cui,et al.  Stretchable, porous, and conductive energy textiles. , 2010, Nano letters.

[7]  N. Sundararajan,et al.  Characterization of laterally deformable elastomer membranes for microfluidics , 2007 .

[8]  Teng Zhai,et al.  WO3–x@Au@MnO2 Core–Shell Nanowires on Carbon Fabric for High‐Performance Flexible Supercapacitors , 2012, Advanced materials.

[9]  S. Asghari,et al.  Study of PEM fuel cell performance by electrochemical impedance spectroscopy , 2010 .

[10]  Yonggang Huang,et al.  Waterproof AlInGaP optoelectronics on stretchable substrates with applications in biomedicine and robotics. , 2010, Nature materials.

[11]  Suk Won Cha,et al.  Air-breathing flexible Polydimethylsiloxane (PDMS)-based fuel cell , 2013 .

[12]  Suk Won Cha,et al.  Electrochemical impedance investigation of flooding in micro-flow channels for proton exchange membrane fuel cells , 2006 .

[13]  S. Cha,et al.  Characteristic behaviors on air-breathing direct methanol fuel cells , 2012 .

[14]  Nam P. Suh,et al.  An overview of the delamination theory of wear , 1977 .

[15]  Seok‐In Na,et al.  Efficient and Flexible ITO‐Free Organic Solar Cells Using Highly Conductive Polymer Anodes , 2008 .

[16]  Jon G. Pharoah,et al.  On effective transport coefficients in PEM fuel cell electrodes: Anisotropy of the porous transport layers , 2006 .

[17]  Keon Jae Lee,et al.  Bendable inorganic thin-film battery for fully flexible electronic systems. , 2012, Nano letters.

[18]  A. Laforgue.  All-textile flexible supercapacitors using electrospun poly(3,4-ethylenedioxythiophene) nanofibers , 2011 .

[19]  Keon Jae Lee,et al.  Water-resistant flexible GaN LED on a liquid crystal polymer substrate for implantable biomedical applications , 2012 .

[20]  Suk Won Cha,et al.  Operational condition analysis for vapor-fed direct methanol fuel cells , 2009 .

[21]  Younan Xia,et al.  Polyol synthesis of silver nanostructures: control of product morphology with Fe(II) or Fe(III) species. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[22]  Hidetoshi Miura,et al.  Application of highly ordered TiO2 nanotube arrays in flexible dye-sensitized solar cells. , 2008, ACS nano.

[23]  Luzhuo Chen,et al.  Highly flexible and all-solid-state paperlike polymer supercapacitors. , 2010, Nano letters.

[24]  S. Xie,et al.  Transmission-Electron-Microscopy Study on Fivefold Twinned Silver Nanorods , 2004 .

[25]  Markku Rouvala,et al.  Nanomaterial-enhanced all-solid flexible zinc--carbon batteries. , 2010, ACS nano.

[26]  W. Smyrl,et al.  High-Performance Flexible Miniature Fuel Cell , 2009 .

[27]  Ya-Pu Zhao,et al.  Deformation of PDMS membrane and microcantilever by a water droplet: comparison between Mooney-Rivlin and linear elastic constitutive models. , 2009, Journal of colloid and interface science.

[28]  Justin A. Blanco,et al.  Dissolvable films of silk fibroin for ultrathin conformal bio-integrated electronics. , 2010, Nature materials.

[29]  Nitish Thakor,et al.  Valve-based microfluidic compression platform: single axon injury and regrowth. , 2011, Lab on a chip.

[30]  Young Ho Seo,et al.  Analysis of Circular PDMS Microballoons With Ultralarge Deflection for MEMS Design , 2010, Journal of Microelectromechanical Systems.

[31]  Younan Xia,et al.  Polyol Synthesis of Uniform Silver Nanowires: A Plausible Growth Mechanism and the Supporting Evidence , 2003 .

[32]  S. Cha,et al.  Metal-coated polycarbonate monopolar plates for portable fuel cells , 2012 .

[33]  Stéphanie P. Lacour,et al.  Flexible and stretchable micro-electrodes for in vitro and in vivo neural interfaces , 2010, Medical & Biological Engineering & Computing.

[34]  Tomoyuki Yasukawa,et al.  All-solid-state micro lithium-ion batteries fabricated by using dry polymer electrolyte with micro-phase separation structure , 2007 .