Simulation of fire and structural response in the Brenner Base Tunnel by means of a combined approach: A case study

Abstract We present and discuss, as a case study, the results of the fire safety analysis of the Brenner Base Tunnel structures. In particular we investigate the behavior of the main cross section of the tunnel using a new coupling strategy between a structural-thermal code based on Multiphase Porous Media Mechanics – MPMM (also called COMES-HTC) and a CFD code (the Fire Dynamics Simulator – FDS). This allows us to define fire loads based on realistic fire scenarios rather than on the classical temperature-time profiles used in engineering practice. Such an advanced analysis is desirable for an infrastructure like the BBT which is one of the most important engineering works under construction in Europe in the field of civil engineering from economic, social and technical point of view. This first set of results shows that the behavior of the “tunnel system” (i.e. fire scenario evolution + structure response) is captured in a much more accurate way, despite of an increased complexity in the analysis.

[1]  Bernhard A. Schrefler,et al.  Finite element analysis of various methods for protection of concrete structures against spalling during fire , 2006 .

[2]  Roman Lackner,et al.  Model-based risk assessment of concrete spalling in tunnel linings under fire loading , 2014 .

[3]  Haukur Ingason,et al.  The maximum ceiling gas temperature in a large tunnel fire , 2012 .

[4]  Bernhard A. Schrefler,et al.  Modelling of deformations of high strength concrete at elevated temperatures , 2004 .

[5]  Bernhard A. Schrefler,et al.  Concrete at high temperature with application to tunnel fire , 2002 .

[6]  Bernhard A. Schrefler,et al.  Modelling of hygro‐thermal behaviour and damage of concrete at temperature above the critical point of water , 2002 .

[7]  Haukur Ingason,et al.  Tunnel Fire Dynamics , 2015 .

[8]  Yiming Zhang,et al.  Fast assessing spalling risk of tunnel linings under RABT fire: From a coupled thermo-hydro-chemo-mechanical model towards an estimation method , 2017 .

[9]  Bernhard A. Schrefler,et al.  Thermal coupling of fluid flow and structural response of a tunnel induced by fire , 2011 .

[10]  Yuji Hasemi,et al.  Simulation Methodology for Coupled Fire-Structure Analysis: Modeling Localized Fire Tests on a Steel Column , 2016 .

[11]  Bernhard A. Schrefler,et al.  Thermo-hydro-chemical couplings considered in safety assessment of shallow tunnels subjected to fire load , 2008 .

[12]  Vittorio Verda,et al.  Calculation and design of tunnel ventilation systems using a two- scale modelling Approach , 2009 .

[13]  Nicola Bianco,et al.  Adiabatic surface temperature as thermal/structural parameter in fire modeling: Thermal analysis for different wall conductivities , 2014 .

[14]  Dat Duthinh,et al.  Adiabatic Surface Temperature for Calculating Heat Transfer to Fire Exposed Structures. | NIST , 2007 .

[15]  Alexandre Landesmann,et al.  Performance-based analysis of cylindrical steel containment Vessels exposed to fire , 2014 .

[16]  Bernhard A. Schrefler,et al.  Modelling of hygro-thermal behaviour of concrete at high temperature with thermo-chemical and mechanical material degradation , 2003 .

[17]  Matteo Pachera,et al.  Numerical simulations of fires in road and rail tunnels with structural and fluid dynamic analysis , 2017 .

[18]  Haukur Ingason,et al.  State of the Art of Tunnel Fire Research , 2008 .

[19]  Bernard Schrefler,et al.  Towards prediction of the thermal spalling risk through a multi-phase porous media model of concrete , 2006 .

[20]  Kevin B. McGrattan,et al.  Numerical Simulation of the Howard Street Tunnel Fire, Baltimore, Maryland, July 2001 | NIST , 2002 .

[22]  James G. Quintiere.  Fundamentals of Enclosure Fire "Zone" Models: , 1989 .