Development of a novel strength ductile Mg–7Al–5Zn alloy with high superplasticity processed by hard-plate rolling (HPR)

[1]  M. Zha,et al.  Prominent role of a high volume fraction of Mg17Al12 particles on tensile behaviors of rolled Mg–Al–Zn alloys , 2017 .

[2]  Fang Wang,et al.  Effects of Al and Zn contents on the microstructure and mechanical properties of Mg-Al-Zn-Ca magnesium alloys , 2017 .

[3]  Liu Guojun,et al.  Effects of Zn on the microstructure and tensile properties of as-extruded Mg-8Al-2Sn alloy , 2017 .

[4]  M. Zha,et al.  Tensile properties, texture evolutions and deformation anisotropy of as-extruded Mg-6Zn-1Zr magnesium alloy at room and elevated temperatures , 2017 .

[5]  Dingfei Zhang,et al.  The role of Al content on deformation behavior and related texture evolution during hot rolling of Mg-Al-Zn alloys , 2017 .

[6]  Ke Huang,et al.  A review of dynamic recrystallization phenomena in metallic materials , 2016 .

[7]  W. Kim,et al.  Microstructure and superplasticity of the as-cast Mg–9Al–1Zn magnesium alloy after high-ratio differential speed rolling , 2016 .

[8]  H. Jafari,et al.  The effects of zirconium and beryllium on microstructure evolution, mechanical properties and corrosion behaviour of as-cast AZ63 alloy , 2016 .

[9]  A. Agarwal,et al.  Influence of loading path and precipitates on indentation creep behavior of wrought Mg–6 wt% Al–1 wt% Zn magnesium alloy , 2016 .

[10]  Lei Zhang,et al.  Achieving a weak basal texture in a Mg–6Al–3Sn alloy by wave-shaped die rolling , 2015 .

[11]  Lei Zhang,et al.  Achieving high strength and high ductility in magnesium alloy using hard-plate rolling (HPR) process , 2015, Scientific Reports.

[12]  Zhengyuan Gao,et al.  Enhancing mechanical properties of Mg–Sn alloys by combining addition of Ca and Zn , 2015 .

[13]  N. Tariq,et al.  The beneficial effect of AgIn addition on deformation behavior, microstructure and texture in Mg–Al–Zn alloy during single pass warm rolling , 2015 .

[14]  D. Xiao,et al.  Achieving high superplasticity of a traditional thermal–mechanical processed non-superplastic Al–Zn–Mg alloy sheet by low Sc additions , 2015 .

[15]  G. Proust,et al.  Role of starting texture and deformation modes on low-temperature shear formability and shear localization of Mg–3Al–1Zn alloy , 2015 .

[16]  B. You,et al.  Strengthening mechanisms of indirect-extruded Mg–Sn based alloys at room temperature , 2014 .

[17]  Yuansheng Yang,et al.  Microstructure and tensile properties of as-cast and as-aged Mg–6Al–4Zn alloys with Sn addition , 2013 .

[18]  D. Hernández-Silva,et al.  Microstructure and texture development in hydrostatically extruded Mg–Al–Zn alloys during tensile testing at intermediate temperatures , 2013 .

[19]  J. Nie.  Precipitation and Hardening in Magnesium Alloys , 2012, Metallurgical and Materials Transactions A.

[20]  S. Han,et al.  Ultrafine-grained Mg–Zn–Zr alloy with high strength and high-strain-rate superplasticity , 2012 .

[21]  R. Mishra,et al.  Influence of grain size and texture on Hall–Petch relationship for a magnesium alloy , 2011 .

[22]  Y. H. Zhao,et al.  Ductility enhancement of extruded magnesium via yttrium addition , 2010 .

[23]  P. Bate,et al.  Diffusion creep and superplasticity in aluminium alloys , 2010 .

[24]  W. Kim,et al.  Achieving high strength and high ductility in magnesium alloys using severe plastic deformation combined with low-temperature aging , 2009 .

[25]  K. Braszczyńska-malik.  Spherical shape of γ-Mg17Al12 precipitates in AZ91 magnesium alloy processed by equal-channel angular pressing , 2009 .

[26]  E. Han,et al.  Effects of rare-earth elements Gd and Y on the solid solution strengthening of Mg alloys , 2009 .

[27]  W. Kim,et al.  Effect of differential speed rolling on microstructure and mechanical properties of an AZ91 magnesium alloy , 2008 .

[28]  Li Jin,et al.  Equal-channel angular pressing of magnesium alloy AZ91 and its effects on microstructure and mechanical properties , 2008 .

[29]  X. Luo,et al.  Effect of composition on the microstructure and mechanical properties of Mg–Zn–Al alloys , 2007 .

[30]  E. Han,et al.  Keys to improving the strength and ductility of the AZ64 magnesium alloy , 2007 .

[31]  E. Nes,et al.  Strengthening mechanisms in solid solution aluminum alloys , 2006 .

[32]  N. H. Nam,et al.  Microstructure and mechanical behavior of AZ91 Mg alloy processed by equal channel angular pressing , 2005 .

[33]  J. Nie.  Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys , 2003 .

[34]  E. Arzt,et al.  Quasi-crystalline grain-boundary phase in the magnesium die- cast alloy ZA85 , 2001 .

[35]  L. Bourgeois,et al.  The crystal structure of the equilibrium Φ phase in Mg–Zn–Al casting alloys , 2001 .

[36]  T. Mcnelley,et al.  Texture analysis of the transition from slip to grain boundary sliding in a continuously recrystallized superplastic aluminum alloy , 2001 .

[37]  S. Celotto,et al.  Study of precipitation in aged binary Mg-Al and ternary Mg-Al-Zn alloys using 27Al NMR spectroscopy , 2001 .

[38]  A. Luo,et al.  An investigation of the properties of Mg-Zn-Al alloys , 1998 .