CORE SIM: A multi-purpose neutronic tool for research and education

This paper deals with the development, validation, and demonstration of an innovative neutronic tool. The novelty of the tool resides in its versatility, since many different systems can be investigated and different kinds of calculations can be performed. More precisely, both critical systems and subcritical systems with an external neutron source can be studied, and static and dynamic cases in the frequency domain (i.e. for stationary fluctuations) can be considered. In addition, the tool has the ability to determine the different eigenfunctions of any nuclear core. For each situation, the static neutron flux, the different eigenmodes and eigenvalues, the first-order neutron noise, and their adjoint functions are estimated, as well as the effective multiplication factor of the system. The main advantages of the tool, which is entirely MatLab based, lie with the robustness of the implemented numerical algorithms, its high portability between different computer platforms and operative systems, and finally its ease of use since no input deck writing is required. The present version of the tool, which is based on two-group diffusion theory, is mostly suited to investigate thermal systems. The definition of both the static and dynamic core configurations directly from the static macroscopic cross-sections and their fluctuations, respectively, makes the tool particularly well suited for research and education. Some of the many benchmark cases used to validate the tool are briefly reported. The static and dynamic capabilities of the tool are also demonstrated for the following configurations: a vibrating control rod, a perturbation traveling upwards with the core flow, and a high frequency localized perturbation. The tool is freely available on direct request to the author of the present paper.

[1]  Shoichiro Nakamura.  Computational methods in engineering and science : with applications to fluid dynamics and nuclear systems , 1977 .

[2]  G. I. Bell,et al.  Introduction to Nuclear Reactor Theory , 1966 .

[3]  Yousef Saad,et al.  Iterative methods for sparse linear systems , 2003 .

[4]  I. Pázsit,et al.  On the Neutron Noise Diagnostics of Pressurized Water Reactor Control Rod Vibrations II. Stochastic Vibrations , 1984 .

[5]  Christophe Demaziere,et al.  Calculation of the eigenfunctions of the two-group neutron diffusion equation and application to modal decomposition of BWR instabilities , 2008 .

[6]  W. Arnoldi.  The principle of minimized iterations in the solution of the matrix eigenvalue problem , 1951 .

[7]  Imre Pázsit,et al.  Numerical tools applied to power reactor noise analysis , 2006 .

[8]  Victor Dykin,et al.  SIMULATION OF LOCAL INSTABILITIES WITH THE USE OF REDUCED ORDER MODELS , 2011 .

[9]  Christophe Demaziere,et al.  Comparative study of 2-group P1 and diffusion theories for the calculation of the neutron noise in 1D 2-region systems , 2009 .

[10]  Thomas J. Higgins,et al.  Random Processes in Nuclear Reactors , 1975, IEEE Transactions on Nuclear Science.

[11]  Christophe Demaziere,et al.  Development of a 2-D 2-group neutron noise simulator , 2004 .

[12]  C. Demazière,et al.  Neutron Noise Calculations Using the Analytical Nodal Method , 2011 .

[13]  Imre Pázsit,et al.  On the possibility of the space-dependence of the stability indicator (decay ratio) of a BWR , 2005 .

[14]  Dan G. Cacuci,et al.  Handbook of Nuclear Engineering , 2010 .

[16]  Christophe Demaziere.  Analysis methods for the determination of possible unseated fuel assemblies in BWRs , 2006 .

[17]  Imre Pázsit,et al.  Dynamic transfer function calculations for core diagnostics , 1992 .

[18]  Imre Pázsit,et al.  Calculation of the Neutron Noise Induced by Shell-Mode Core-Barrel Vibrations in a 1-D, Two-Group, Two-Region Slab Reactor Model , 2006 .

[19]  Imre Pázsit,et al.  Development of a Method for Measuring the Moderator Temperature Coefficient by Noise Analysis and Its Experimental Verification in Ringhals-2 , 2004 .

[20]  Imre Pázsit,et al.  Noise Techniques in Nuclear Systems , 2010 .