Inhibition of Abnormal Grain Growth in Stir Zone via In-Situ Intermetallic Particle Formation During Friction Stir Welding of AA6061

[1]  Yongxian Huang,et al.  Heteroatom Modification Enhances Corrosion Durability in High‐Mechanical‐Performance Graphene‐Reinforced Aluminum Matrix Composites , 2022, Advanced science.

[2]  A. Rajabi,et al.  Mechanical Property Improvement in Dissimilar Friction Stir Welded Al5083/Al6061 Joints: Effects of Post-Weld Heat Treatment and Abnormal Grain Growth , 2021, Materials.

[3]  R. Kaibyshev,et al.  Suppression of abnormal grain growth in friction-stir welded aluminum by pre-strain rolling: Limitation of the approach , 2021, Materials Science and Engineering: A.

[4]  R. Kaibyshev,et al.  New insight into the phenomenon of the abnormal grain growth in friction-stir welded aluminum , 2021 .

[5]  R. Kaibyshev,et al.  Relationship between welding conditions, abnormal grain growth and mechanical performance in friction-stir welded 6061-T6 aluminum alloy , 2021, Materials Science and Engineering: A.

[6]  R. Kaibyshev,et al.  Suppression of abnormal grain growth in friction-stir welded Al–Cu–Mg alloy by lowering of welding temperature , 2021, Scripta Materialia.

[7]  A. Simar,et al.  Avoiding abnormal grain growth in thick 7XXX aluminium alloy friction stir welds during T6 post heat treatments , 2021 .

[8]  H. Su,et al.  Numerical Simulation for the Optimization of Polygonal Pin Profiles in Friction Stir Welding of Aluminum , 2021, Acta Metallurgica Sinica (English Letters).

[9]  Jian Cao,et al.  Recent progress on control strategies for inherent issues in friction stir welding , 2021 .

[10]  J. Robson,et al.  Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution , 2020 .

[11]  Z. Ma,et al.  Preface to the Special Issue: Friction Stir Welding and Processing , 2020, Acta Metallurgica Sinica (English Letters).

[12]  A. Arora,et al.  Effect of Tool Shoulder Diameter on the Surface Hardness of Aluminum-Molybdenum Surface Composites Developed by Single and Double Groove Friction Stir Processing , 2019, Metallurgical and Materials Transactions A.

[13]  R. Kaibyshev,et al.  Effect of pre-strain path on suppression of abnormal grain growth in friction-stir welded 6061 aluminum alloy , 2019, Materials Science and Engineering: A.

[14]  Yifu Shen,et al.  Microstructure, mechanical properties and strengthening mechanism of titanium particle reinforced aluminum matrix composites produced by submerged friction stir processing , 2018, Materials Science and Engineering: A.

[15]  R. Kaibyshev,et al.  Pre-strain rolling as an effective tool for suppression of abnormal grain growth in friction-stir welded 6061 aluminum alloy , 2018, Materials Science and Engineering: A.

[16]  Fencheng Liu,et al.  Inhomogeneity of microstructure and mechanical properties in the nugget of friction stir welded thick 7075 aluminum alloy joints , 2017 .

[17]  Yufeng Sun,et al.  Effect of abnormal grain growth on microstructure and mechanical properties of friction stir welded SPCC steel plates , 2017 .

[18]  X. S. Wang,et al.  The effect of postprocessing on tensile property and microstructure evolution of friction stir welding aluminum alloy joint , 2015 .

[19]  M. Bahrami,et al.  Exploring the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded 7075 aluminum alloy: Fatigue life, impact energy, tensile strength , 2014 .

[20]  W. Wang,et al.  Reactive mechanism and mechanical properties of in situ composites fabricated from an Al-TiO2 system by friction stir processing , 2012 .

[21]  H. Kokawa,et al.  Relationship between material flow and abnormal grain growth in friction-stir welds , 2012 .

[22]  R. H. Wagoner,et al.  The Mechanism of Grain Coarsening in Friction-Stir-Welded AA5083 after Heat Treatment , 2011 .

[23]  Rajiv S. Mishra,et al.  Effect of Process Parameters on Abnormal Grain Growth during Friction Stir Processing of a Cast Al Alloy , 2010 .

[24]  B. Xiao,et al.  Investigation of superplasticity in friction stir processed 2219Al alloy , 2010 .

[25]  J. Ciulik,et al.  Dynamic abnormal grain growth: A new method to produce single crystals , 2009 .

[26]  S. Boutorabi,et al.  Effect of abnormal grain growth on tensile strength of Al–Cu–Mg alloy friction stir welded joints , 2009 .

[27]  R. Mishra,et al.  Abnormal grain growth in friction stir processed alloys , 2008 .

[28]  Y. Chen,et al.  Stability of the grain structure in 2219-O aluminum alloy friction stir welds during solution treatment , 2007 .

[29]  Moataz M. Attallah,et al.  Friction stir welding parameters: a tool for controlling abnormal grain growth during subsequent heat treatment , 2005 .

[30]  H. Kokawa,et al.  Distribution of tensile property and microstructure in friction stir weld of 6063 aluminum , 2001 .

[31]  G. Biallas,et al.  Mechanical Properties and Corrosion Behaviour of Friction Stir Welded Al2024-T3 , 1999 .

[32]  F. J. Humphreys,et al.  Recrystallization and Related Annealing Phenomena , 1995 .

[33]  A. Götte,et al.  Metall , 1897 .