Behavior of reinforced concrete beams strengthened with externally bonded hybrid fiber reinforced polymer systems

Abstract This paper presents an experimental and an analytical investigation of the behavior of Reinforced Concrete (RC) beams strengthened in flexure by means of different combinations of externally bonded hybrid Glass and Carbon Fiber Reinforced Polymer (GFRP/CFRP) sheets. In order to obtain the mechanical properties of the hybrid sheets, multiple tensile coupon tests were conducted. In addition, an experimental program consisting of a control beam and four beams strengthened in flexure with GFRP, CFRP and hybrid FRP sheets was conducted. The series of the RC beams were tested under four point bending to study the flexural effectiveness of the proposed hybrid FRP sheets. The load–deflection response, strain readings at certain locations and associated failure modes of the tested specimens had been recorded. It is observed that the increase in the load capacity of the strengthened beams ranged from 30% to 98% of the un-strengthened control RC beam depending on the combination of the Carbon/Glass sheets. It was also observed that the ductility at failure loads of the beams strengthened with glass and hybrid sheets is higher than that with a single carbon sheet. Hence, the selection of the optimum combination of hybrid sheets can lead to a strengthening material which provides an improved ductility and strength in beam behavior. The load carrying capacity of the tested specimens was then predicted by the ACI 440.2R-08 guidelines. The predicted and measured results were in good agreement, within 5% for the control beam and for beams with one layer of strengthening sheet and between 13% and 17% for beams with two or more layers of hybrid strengthening sheets. Furthermore, an analytical model was developed to predict the load–deflection response of the tested specimens and the results were compared with the measured experimental data. The results showed that the developed analytical model predicted the response of the tested beam specimens with reasonable accuracy.

[1]  B. Doran,et al.  Nonlinear finite element modeling of rectangular/square concrete columns confined with FRP , 2009 .

[2]  Robert J. Peterman,et al.  Strength-Fatigue Behavior of Fiber Reinforced Polymer Strengthened Prestressed Concrete T-Beams , 2005 .

[3]  Dan Wang,et al.  Reinforced concrete beams strengthened with carbon fiber reinforced polymer by friction hybrid bond technique: Experimental investigation , 2013 .

[4]  Yufei Wu,et al.  Hybrid Bonding of FRP to Reinforced Concrete Structures , 2008 .

[5]  Zhishen Wu,et al.  Strengthening of Preloaded RC Beams Using Hybrid Carbon Sheets , 2007 .

[6]  T. Alkhrdaji,et al.  Ductile strengthening using externally bonded and near surface mounted composite systems , 2010 .

[7]  Z. B. Ji,et al.  Behavior of Reinforced Concrete Beams Strengthened with Externally Bonded Hybrid Carbon Fiber–Glass Fiber Sheets , 2004 .

[8]  Jamal A. Abdalla,et al.  Effects of Ratio of CFRP Plate Length to Shear Span and End Anchorage on Flexural Behavior of SCC RC Beams , 2011 .

[9]  Nabil F. Grace,et al.  Strengthening of Concrete Beams Using Innovative Ductile Fiber-Reinforced Polymer Fabric , 2002 .

[10]  Sang-Su Ha,et al.  Flexural and Bond Behavior of Concrete Beams Strengthened with Hybrid Carbon-Glass Fiber-Reinforced Polymer Sheets , 2011 .

[11]  Robert J. Peterman,et al.  Analysis and Design Procedure for FRP-Strengthened Prestressed Concrete T-Girders Considering Strength and Fatigue , 2006 .

[12]  Yeoshua Frostig,et al.  Experiments and analytical comparison of RC beams strengthened with CFRP composites , 2003 .

[13]  H. Toutanji,et al.  FLEXURAL BEHAVIOR OF REINFORCED CONCRETE BEAMS EXTERNALLY STRENGTHENED WITH CFRP SHEETS BONDED WITH AN INORGANIC MATRIX , 2006 .

[14]  M. Z. Naser,et al.  Nonlinear finite element modeling of concrete deep beams with openings strengthened with externally-bonded composites , 2012 .

[15]  Moatasem M. Fayyadh,et al.  Reinforced concrete beams with web openings: A state of the art review , 2012 .

[16]  F. Liu,et al.  Interfacial stress analysis of RC beams strengthened with hybrid CFS and GFS , 2009 .

[17]  Oliver Kelly,et al.  Ultimate Response of RC Beams Strengthened with CFRP Plates , 2001 .

[18]  A. Nanni,et al.  BRITTLE FAILURE IN FRP PLATE AND SHEET BONDED BEAMS , 1997 .

[19]  M. Shahawy,et al.  SHORT-TERM TENSILE STRENGTH OF CARBON-FIBER-REINFORCED POLYMER LAMINATES FOR FLEXURAL STRENGTHENING OF CONCRETE GIRDERS , 2001 .

[20]  A A Maghsoudi,et al.  Experimental and analytical investigation of reinforced high strength concrete continuous beams strengthened with fiber reinforced polymer , 2010 .

[21]  Stephanie L. Walkup,et al.  Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures (ACI 440.2R-02) , 2005 .

[22]  S. O. Asplund.  Strengthening Bridge Slabs with Grouted Reinforcement , 1949 .

[23]  Jamal A. Abdalla,et al.  Flexural Performance of Strengthened RC Beams with CFRP Laminates Subjected to Cyclic Loading , 2011 .