Improved gas sensing of electrospun carbon fibers based on pore structure, conductivity and surface modification

Abstract A polyacrylonitrile and carbon black complex was fabricated as a gas sensor using an electrospinning method. The electrospun fibers were thermally treated to obtain carbon fibers, which were then chemically activated to improve the active sites for gas adsorption. The surface of the activated sample was modified by a fluorination treatment. The electrical conductivity was improved by the inclusion of carbon black additives. The activation process improved the porous structure, increasing the specific surface area around 100 times. The gas sensing ability was improved by the developed porous structure and induced functional groups. This treatment improves each of the three steps in the gas sensing mechanism. First, the induced functional groups attracted the target gas to the surface of the gas sensor through induced functional groups. Second, the pore structure significantly increased the amount of adsorbed gas. Third, the electrically conductive carbon black additives resulted in an efficient transfer of the resistive response from the surface of the gas sensor to the electrode. In total, the sensor sensitivity for NO and CO gases was improved about five times based on the effects of chemical activation, carbon black additives, and fluorination treatments.

[1]  J. H. Lee,et al.  Gas sensors using hierarchical and hollow oxide nanostructures: Overview , 2009 .

[2]  R. P. Tandon,et al.  Gas and humidity sensors based on iron oxide–polypyrrole nanocomposites , 2002 .

[3]  Junya Suehiro,et al.  Controlled fabrication of carbon nanotube NO2 gas sensor using dielectrophoretic impedance measurement , 2005 .

[4]  M. Penza,et al.  Characterization of metal-modified and vertically-aligned carbon nanotube films for functionally enhanced gas sensor applications , 2009 .

[5]  Karen Lozano,et al.  Study of processing variables on the electrical resistivity of conductive adhesives , 2009 .

[6]  Young-Seak Lee,et al.  Hydrogen storage evaluation based on investigations of the catalytic properties of metal/metal oxides in electrospun carbon fibers , 2009 .

[7]  Li Niu,et al.  A highly selective chemical gas sensor based on functionalization of multi-walled carbon nanotubes with poly(ethylene glycol) , 2007 .

[8]  Young-Seak Lee,et al.  Synthesis and characterization of mesoporous electrospun carbon fibers derived from silica template , 2009 .

[9]  Young Ho Kim,et al.  The study of controlling pore size on electrospun carbon nanofibers for hydrogen adsorption. , 2008, Journal of colloid and interface science.

[10]  Young-Seak Lee,et al.  Hydrophilic modification of polyacrylonitrile membranes by oxyfluorination , 2009 .

[11]  D. Claves,et al.  Selective substitution of fluorine atoms grafted to the surface of carbon nanotubes and application to an oxyfluorination strategy , 2008 .

[12]  A. Tressaud,et al.  Fluorination of carbon blacks: An X-ray photoelectron spectroscopy study: I. A literature review of XPS studies of fluorinated carbons. XPS investigation of some reference compounds , 1997 .

[13]  A. Salehi,et al.  Characteristics of highly sensitive Au/porous-GaAs Schottky junctions as selective CO and NO gas sensors , 2007 .

[14]  M. C. Horrillo,et al.  Multi-Walled Carbon Nanotube Networks As Gas Sensors for NO2 Detection , 2007, TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference.

[15]  Chueh-Yang Liu,et al.  Fabrication and carbon monoxide sensing characteristics of mesostructured carbon gas sensors , 2009 .

[16]  Craig A. Grimes,et al.  Gas sensing characteristics of multi-wall carbon nanotubes , 2001 .

[17]  L. Durrer,et al.  SWNT Growth by LPCVD on Ferritin-Based Iron Catalyst Nanoparticles Towards CNT Sensors , 2007, TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference.

[18]  C. Yeh,et al.  Promotive effect of CNT on Co3O4–SnO2 in a semiconductor-type CO sensor working at room temperature , 2008 .

[19]  S. Radhakrishnan,et al.  Conducting polypyrrole modified with ferrocene for applications in carbon monoxide sensors , 2007 .

[20]  Young-Seak Lee,et al.  The metal–carbon–fluorine system for improving hydrogen storage by using metal and fluorine with different levels of electronegativity , 2009 .

[21]  Young Ho Kim,et al.  A comparative study on properties of multi-walled carbon nanotubes (MWCNTs) modified with acids and oxyfluorination , 2007 .

[22]  J. Y. Park,et al.  Optimization of the electrospinning conditions for preparation of nanofibers from polyvinylacetate (PVAc) in ethanol solvent , 2008 .

[23]  Chang sam Kim,et al.  Study on sensing properties of tin oxide CO gas sensor with low power consumption , 2002 .

[24]  Young-Seak Lee,et al.  Characterization of nanocrystalline porous SiC powder by electrospinning and carbothermal reduction , 2010 .

[25]  M. Ue,et al.  Electrochemical properties of fluoropropylene carbonate and its application to lithium-ion batteries , 2008 .

[26]  Young-Seak Lee,et al.  Nitrogen and hydrogen adsorption of activated carbon fibers modified by fluorination , 2009 .

[27]  Young-Seak Lee,et al.  Effects of fluorination modification on pore size controlled electrospun activated carbon fibers for high capacity methane storage. , 2009, Journal of colloid and interface science.

[28]  T. Enoki,et al.  Gas adsorption effects on structural and electrical properties of activated carbon fibers , 1998 .

[29]  Chang-Seop Lee,et al.  Fabrication and its characteristics of metal-loaded TiO2/SnO2 thick-film gas sensor for detecting dichloromethane , 2008 .

[30]  Young-Seak Lee.  Syntheses and properties of fluorinated carbon materials , 2007 .

[31]  Douglas R. Kauffman,et al.  Carbon nanotube gas and vapor sensors. , 2008, Angewandte Chemie.

[32]  Young-Seak Lee,et al.  The effect of carbon nanotubes on drug delivery in an electro-sensitive transdermal drug delivery system. , 2010, Biomaterials.

[33]  Young-Seak Lee,et al.  Preparation and characteristics of electrospun activated carbon materials having meso- and macropores. , 2007, Journal of colloid and interface science.

[34]  Young-Seak Lee,et al.  The improved electrical conductivity of carbon nanofibers by fluorinated MWCNTs , 2009 .

[35]  Jannik C. Meyer,et al.  Effect of fluorination on electrical properties of single walled carbon nanotubes and C60 peapods in networks , 2007 .

[36]  Young-Seak Lee,et al.  A high resolution XPS study of sidewall functionalized MWCNTs by fluorination , 2009 .

[37]  Bin Chen,et al.  Pore structure of raw and purified HiPco single-walled carbon nanotubes , 2002 .

[38]  Yit‐Tsong Chen,et al.  Electron hopping conduction in highly disordered carbon coils , 2009 .

[39]  E. Durand,et al.  Surface modification of several carbon-based materials: comparison between CF4 rf plasma and direct F2-gas fluorination routes , 2004 .

[40]  Byung-Joo Kim,et al.  Ammonia removal of activated carbon fibers produced by oxyfluorination. , 2005, Journal of colloid and interface science.

[41]  Y. Nho,et al.  Effects of gamma irradiation on the thermal and mechanical properties of chitosan/PVA nanofibrous mats , 2009 .