Micro solar energy harvesting using thin film selective absorber coating and thermoelectric generators

The use of a nanometer-scale solar selective absorber coating to enhance the performance of a thermoelectric generation (TEG) module in solar thermal energy harvesting is presented. The thin film coating is fabricated by electrochemical deposition of a bimetallic layer of tin and nickel on copper substrate. The coating has a dendrite structure with grain size of 100 nm. Testing indicates the ability of these collectors to transform incident radiation into thermal energy. The collectors utilizing the selective coating achieved a final temperature 10 °C higher than the baseline copper device. More importantly, the coating demonstrates the ability to collect and transmit over 90 % of the available heat flux. The harvested thermal energy is applied to drive a TEG module for useful power generation. The device utilized with selective absorber coating shows an output power 4.5 times more than the baseline device. Overall area of the collector plate is 16 cm2.

[1]  C. Kennedy.  Review of Mid- to High-Temperature Solar Selective Absorber Materials , 2002 .

[2]  H. Dikov,et al.  A High Effective Selective Absorbing Coating for Solar Thermal Collectors , 2010 .

[3]  Soteris A. Kalogirou,et al.  Solar thermal collectors and applications , 2004 .

[4]  Leland Weiss,et al.  Power production from phase change in MEMS and micro devices, a review , 2011 .

[5]  C. Richards,et al.  Power Output Force Generation by a MEMS Phase Change Actuator , 2011, Journal of Microelectromechanical Systems.

[6]  Brian Norton,et al.  Anatomy of a solar collector , 2006 .

[7]  Norbert Kockmann,et al.  Design and fabrication of MEMS thermoelectric generators with high temperature efficiency , 2008 .

[8]  Ibrahim Hassan,et al.  Thermal-Fluid MEMS Devices: A Decade of Progress and Challenges Ahead , 2006 .

[9]  S. P Sukhatme,et al.  Solar Energy: Principles of Thermal Collection and Storage , 2009 .

[10]  Qi Zhang,et al.  Solar micro-energy harvesting based on thermoelectric and latent heat effects. Part II: Experimental analysis , 2010 .

[11]  Hui Shao,et al.  The Design of a Micro Power Management System for Applications Using Photovoltaic Cells With the Maximum Output Power Control , 2009, IEEE Transactions on Very Large Scale Integration (VLSI) Systems.

[12]  A. Muehlratzer,et al.  Selection of a black chrome bath for continuous tube-plating and the properties of the coatings deposited from it , 1981 .

[13]  G. Nielson,et al.  Microsystems-Enabled Photovoltaics: A Path to the Widespread Harnessing of Solar Energy. , 2010 .

[14]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[15]  M. Strasser,et al.  Micromachined CMOS thermoelectric generators as on-chip power supply , 2004 .

[16]  C. Van Hoof,et al.  Thermoelectric MEMS generators as a power supply for a body area network , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[17]  David E. Culler,et al.  Design, Modeling, and Capacity Planning for Micro-solar Power Sensor Networks , 2008, 2008 International Conference on Information Processing in Sensor Networks (ipsn 2008).

[18]  Jaein Jeong,et al.  Design and analysis of micro-solar power systems for Wireless Sensor Networks , 2008, 2008 5th International Conference on Networked Sensing Systems.

[19]  P. Woias,et al.  A novel self-starting MEMS-heat engine for thermal energy harvesting , 2010, 2010 IEEE 23rd International Conference on Micro Electro Mechanical Systems (MEMS).