Coupled Numerical Evaluations of the Geomechanical Interactions Between a Hydraulic Fracture Stimulation and a Natural Fracture System in Shale Formations

Due to the low permeability of many shale reservoirs, multi-stage hydraulic fracturing in horizontal wells is used to increase the productive, stimulated reservoir volume. However, each created hydraulic fracture alters the stress field around it, and subsequent fractures are affected by the stress field from previous fractures. The results of a numerical evaluation of the effect of stress field changes (stress shadowing), as a function of natural fracture and geomechanical properties, are presented, including a detailed evaluation of natural fracture shear failure (and, by analogy, the generated microseismicity) due to a created hydraulic fracture. The numerical simulations were performed using continuum and discrete element modeling approaches in both mechanical-only and fully coupled, hydro-mechanical modes. The results show the critical impacts that the stress field changes from a created hydraulic fracture have on the shear of the natural fracture system, which in-turn, significantly affects the success of the hydraulic fracture stimulation. Furthermore, the results provide important insight into: the role of completion design (stage spacing) and operational parameters (rate, viscosity, etc.) on the possibility of enhancing the stimulation of the natural fracture network (‘complexity’); the mechanisms that generate the microseismicity that occurs during a hydraulic fracture stimulation; and the interpretation of the generated microseismicity in relation to the volume of stimulated reservoir formation.

[1]  E. C.,et al.  An Experimentally Verified Criterion for Propagation Across Unbounded Frictional Interfaces in Brittle, Linear Elastic Materials , 2022 .

[2]  Norman R. Warpinski,et al.  Influence of Geologic Discontinuities on Hydraulic Fracture Propagation (includes associated papers 17011 and 17074 ) , 1984 .

[3]  M. C. Fehler,et al.  Hydraulic Fracturing of Jointed Formations , 1986 .

[4]  A. M. Starfield,et al.  TOWARDS A METHODOLOGY FOR ROCK MECHANICS MODELLING , 1988 .

[5]  Modeling Shear Dominated Hydraulic Fracturing as a coupled fluid-solid interaction , 2010 .

[6]  Laura J. Pyrak-Nolte,et al.  Single fractures under normal stress: The relation between fracture specific stiffness and fluid flow , 2000 .

[7]  Nathan Deisman,et al.  An Adaptive Continuum/Discontinuum Coupled Reservoir Geomechanics Simulation Approach for Fractured Reservoirs , 2009 .

[8]  C. Fairhurst,et al.  Fracture network engineering for hydraulic fracturing , 2011 .

[9]  M. Mayerhofer,et al.  Integrating Fracture Diagnostics and Engineering Data in the Marcellus Shale , 2011 .

[10]  J. C. Jaeger,et al.  Conduction of Heat in Solids , 1952 .

[11]  N. Nagel,et al.  Stress Shadowing and Microseismic Events: A Numerical Evaluation , 2011 .

[12]  William Dershowitz,et al.  Discrete Fracture Network Modeling For Carbonate Rock , 2007 .

[13]  P. A. Cundall,et al.  NUMERICAL MODELLING OF DISCONTINUA , 1992 .

[14]  George E. King,et al.  Thirty Years of Gas Shale Fracturing: What Have We Learned? , 2010 .

[15]  Jose Adachi,et al.  Computer simulation of hydraulic fractures , 2007 .

[16]  Michael Fehler,et al.  Petroleum reservoir characterization using downhole microseismic monitoring , 2010 .

[17]  King Kwee Chong,et al.  A Completions Guide Book to Shale-Play Development: A Review of Successful Approaches toward Shale-Play Stimulation in the Last Two Decades , 2010 .

[18]  Neal Borden Nagel,et al.  Gas Shale Hydraulic Fracturing: A Numerical Evaluation of the Effect of Geomechanical Parameters , 2012 .

[19]  Robert Will,et al.  Integration of Seismic Anisotropy and Reservoir Performance Data for Characterization of Naturally Fractured Reservoirs Using Discrete Feature Network Models , 2005 .

[20]  P. Cundall.  A computer model for simulating progressive, large-scale movements in blocky rock systems , 1971 .

[21]  P. A. Cundall,et al.  FORMULATION OF A THREE-DIMENSIONAL DISTINCT ELEMENT MODEL - PART I. A SCHEME TO DETECT AND REPRESENT CONTACTS IN A SYSTEM COMPOSED OF MANY POLYHEDRAL BLOCKS , 1988 .

[22]  Dennis Denney,et al.  Thirty Years of Gas-Shale Fracturing: What Have We Learned? , 2010 .

[23]  K. Sato,et al.  Experimental Hydraulic Fracture Propagation in a Multi-Fractured Medium , 2000 .

[24]  Robert G. Jeffrey,et al.  Reinitiation or termination of fluid‐driven fractures at frictional bedding interfaces , 2008 .

[25]  T. Urbancic,et al.  Assessing Stimulation of Complex Natural Fractures as Characterized Using Microseismicity: An Argument the Inclusion of Sub-Horizontal Fractures in Reservoir Models , 2012 .

[26]  T. L. Blanton,et al.  An Experimental Study of Interaction Between Hydraulically Induced and Pre-Existing Fractures , 1982 .

[27]  Michael B. Smith,et al.  Hydraulic Fracturing: History of an Enduring Technology , 2010 .

[28]  N. R. Warpinski,et al.  Microseismic Monitoring: Inside and Out , 2009 .

[29]  Richard Wan,et al.  Prediction And Optimization Of Fracturing In Tight Gas And Shale Using A Coupled Geomechanical Model Of Combined Tensile And Shear Fracturing , 2012 .

[30]  F. W. Jessen,et al.  The Effects of Existing Fractures in Rocks on the Extension of Hydraulic Fractures , 1963 .

[31]  Craig L. Cipolla,et al.  What Does Microseismicity Tell Us About Hydraulic Fracturing , 2011 .

[32]  John McLennan,et al.  A new approach to hydraulic fracturing modeling in naturally fractured reservoirs , 2010 .

[33]  P. A. Cundall,et al.  9 – Numerical Modeling of Discontinua , 1993 .

[34]  Pierre Gadonneix,et al.  Survey of Energy Resources: Focus on Shale Gas , 2010 .

[35]  M. P. Cleary,et al.  Slippage and re‐initiation of (hydraulic) fractures at frictional interfaces , 1984 .

[36]  X. Garcia,et al.  Understanding "SRV": A Numerical Investigation of "Wet" vs. "Dry" Microseismicity During Hydraulic Fracturing , 2012 .

[37]  Robert Will,et al.  Integration of Seismic Anisotropy and Reservoir Performance Data for Characterization of Naturally Fractured Reservoirs Using Discrete Feature Network Models , 2005 .

[38]  N. Barton,et al.  The shear strength of rock joints in theory and practice , 1977 .

[39]  Ove Stephansson,et al.  Fundamentals of discrete element methods for rock engineering , 2007 .

[40]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[41]  Sheik S. Rahman,et al.  Interaction between induced hydraulic fracture and pre-existing natural fracture in a poro-elastic environment: effect of pore pressure change and the orientation of natural fractures , 2009 .

[42]  Xiaowei Weng,et al.  Numerical Modeling of Hydraulic Fracturing In Naturally Fractured Formations , 2011 .

[43]  J. E. Warren,et al.  The Behavior of Naturally Fractured Reservoirs , 1963 .

[44]  Michael E. Plesha,et al.  Discrete element method for modelling solid and particulate materials , 2007 .

[45]  Lucas W. Bazan,et al.  A Discrete Fracture Network Model for Hydraulically Induced Fractures - Theory, Parametric and Case Studies , 2011 .