Hot deformation behavior and microstructure evolution of TA15 titanium alloy with nonuniform microstructure

[1]  He Yang,et al.  Microstructure control techniques in primary hot working of titanium alloy bars: A review , 2016 .

[2]  Lin Liu,et al.  Effect of the alpha grain size on the deformation behavior during isothermal compression of Ti–6Al–4V alloy , 2015 .

[3]  Y. Ning,et al.  Dynamic softening behavior of TC18 titanium alloy during hot deformation , 2015 .

[4]  Miaoquan Li,et al.  Dynamic globularization and restoration mechanism of Ti–5Al–2Sn–2Zr–4Mo–4Cr alloy during isothermal compression , 2015 .

[5]  He Yang,et al.  Unified modeling of flow softening and globularization for hot working of two-phase titanium alloy with a lamellar colony microstructure , 2014 .

[6]  Zhi-feng Shi,et al.  Study on the hot deformation behavior of TC4-DT alloy with equiaxed α+β starting structure based on processing map , 2014 .

[7]  J. Yeom,et al.  The origins of flow softening during high-temperature deformation of a Ti–6Al–4V alloy with a lamellar microstructure , 2014 .

[8]  Zhichao Sun,et al.  Some Advances in Plastic Forming Technologies of Titanium Alloys , 2014 .

[9]  Lars-Erik Lindgren,et al.  Dislocation density based model for plastic deformation and globularization of Ti-6Al-4V , 2013 .

[10]  Jinghui Li,et al.  Hot deformation mechanism and microstructure evolution of a new near β titanium alloy , 2013 .

[11]  H. Yang,et al.  Prediction of constitutive behavior and microstructure evolution in hot deformation of TA15 titanium alloy , 2013 .

[12]  B. Tang,et al.  Characterization of hot deformation behavior of a new near beta titanium alloy: Ti-7333 , 2013 .

[13]  W. Zeng,et al.  Characterization of high-temperature deformation behavior of as-cast Ti60 titanium alloy using processing map , 2013 .

[14]  James C. Williams,et al.  Perspectives on Titanium Science and Technology , 2013 .

[15]  Raymond F. Wegman,et al.  Titanium and Titanium Alloys , 2013 .

[16]  Mei Li,et al.  The deformation behavior of isothermally compressed Ti-17 titanium alloy in α + β field , 2012 .

[17]  H. Yang,et al.  Microstructural features of TA15 titanium alloy under different temperature routes in isothermal local loading forming , 2012 .

[18]  H. Yang,et al.  Internal-state-variable based self-consistent constitutive modeling for hot working of two-phase titanium alloys coupling microstructure evolution , 2011 .

[19]  S. Semiatin,et al.  Spheroidization of the lamellar microstructure in Ti–6Al–4V alloy during warm deformation and annealing , 2011 .

[20]  Hongzhen Guo,et al.  Influence of processing parameters on microstructure and tensile properties of TG6 titanium alloy , 2010 .

[21]  Hong-wu Song,et al.  Dynamic globularization kinetics during hot working of a two phase titanium alloy with a colony alpha microstructure , 2009 .

[22]  S. L. Semiatin,et al.  Microstructure evolution during warm working of Ti–6Al–4V with a colony-α microstructure , 2009 .

[23]  D. Shan,et al.  Flow softening and microstructural evolution of TC11 titanium alloy during hot deformation , 2009 .

[24]  M. Jackson,et al.  Effect of initial microstructure on plastic flow behaviour during isothermal forging of Ti-10V-2Fe-3Al , 2009 .

[25]  Leo Kestens,et al.  Nucleation and variant selection of secondary α plates in a β Ti alloy , 2008 .

[26]  Chun‐Sing Lee,et al.  Microstructural Mechanisms during Dynamic Globularization of Ti-6Al-4V Alloy , 2008 .

[27]  S. Semiatin,et al.  Alpha/Beta Heat Treatment of a Titanium Alloy with a Nonuniform Microstructure , 2007 .

[28]  P. Wanjara,et al.  Influence of thermomechanical processing on microstructural evolution in near-α alloy IMI834 , 2006 .

[29]  Di Zhang,et al.  Microstructure evolution of near-α titanium alloys during thermomechanical processing , 2006 .

[30]  S. Tamirisakandala,et al.  Recent advances in the deformation processing of titanium alloys , 2003 .

[31]  T. Bieler,et al.  The origins of heterogeneous deformation during primary hot working of Ti–6Al–4V , 2002 .

[32]  J. Jonas,et al.  Self-consistent modeling of the flow behavior of wrought alpha/beta titanium alloys under isothermal and nonisothermal hot-working conditions , 2002 .

[33]  Thomas R. Bieler,et al.  The effect of alpha platelet thickness on plastic flow during hot working of TI–6Al–4V with a transformed microstructure , 2001 .

[34]  T. Bieler,et al.  Effect of texture changes on flow softening during hot working of Ti-6Al-4V , 2001 .

[35]  T. Bieler,et al.  Effect of texture and slip mode on the anisotropy of plastic flow and flow softening during hot working of Ti-6Al-4V , 2001 .

[36]  S. Semiatin,et al.  Effect of initial microstructure on plastic flow and dynamic globularization during hot working of Ti-6Al-4V , 1999 .

[37]  T. Bieler,et al.  Flow softening during hot working of Ti-6Al-4V with a lamellar colony microstructure , 1999 .

[38]  S. Semiatin,et al.  Flow behavior and globularization kinetics during hot working of Ti–6Al–4V with a colony alpha microstructure , 1999 .

[39]  G. Lütjering.  Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys , 1998 .

[40]  R. Boyer.  An overview on the use of titanium in the aerospace industry , 1996 .