Analysis of Single-Stage Resonant Power Factor Corrector for LED Lighting Application

PFC are used in LED lighting applications for improving the power factor. S6-PFC converter is used as driver for supplying the light-emitting diodes. Unlike usual power supply, this strategy does not have any electrolytic capacitors. The converter has a bidirectional switch with soft switching conditions for turning ON and OFF. Along with the soft switching, the recycling of energy by making magnetizing inductance in the transformer as the resonant component, increases the overall efficiency of the driver. The buck-boost cell in the converter improves the power factor inherently. This paper discuss about the closed loop operation of this converter using PI controller. Variation in output and the switching operation of MOSFET with respect to change in input and load were analyzed. The closed loop S6-PFC converter is simulated using MATLAB/Simulink platform, for a prototype design of 21W/30V LED lighting system.

[1]  Yaow-Ming Chen,et al.  Line Current Distortion Compensation for DCM/CRM Boost PFC Converters , 2016, IEEE Transactions on Power Electronics.

[2]  P. K. Preetha,et al.  Power factor correction circuit with one cycle controlled bridgeless zeta converter for display monitors in hospitals , 2015, TENCON 2015 - 2015 IEEE Region 10 Conference.

[3]  K.-H. Liu,et al.  Current waveform distortion in power factor correction circuits employing discontinuous-mode boost converters , 1989, 20th Annual IEEE Power Electronics Specialists Conference.

[4]  J. Sebastian,et al.  Design and experimental results of an input-current-shaper based electronic ballast , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[5]  Marco A. Dalla Costa,et al.  A Single-Stage High-Power-Factor Electronic Ballast Based on Integrated Buck Flyback Converter to Supply Metal Halide Lamps , 2008, IEEE Transactions on Industrial Electronics.

[6]  Marian K. Kazimierczuk,et al.  Voltage-Loop Power-Stage Transfer Functions With MOSFET Delay for Boost PWM Converter Operating in CCM , 2007, IEEE Transactions on Industrial Electronics.

[7]  Xinke Wu,et al.  An Improved Variable On-Time Control Strategy for a CRM Flyback PFC Converter , 2017, IEEE Transactions on Power Electronics.

[8]  P. Kanakasabapathy,et al.  Switched-capacitor/switched-inductor Ćuk-derived hybrid converter for nanogrid applications , 2015, 2015 International Conference on Computation of Power, Energy, Information and Communication (ICCPEIC).

[9]  Dianguo Xu,et al.  A Single-Stage LED Driver Based on BCM Boost Circuit and $LLC$ Converter for Street Lighting System , 2015, IEEE Transactions on Industrial Electronics.

[10]  Alberto Rodriguez,et al.  Design-Oriented Analysis and Performance Evaluation of a Low-Cost High-Brightness LED Driver Based on Flyback Power Factor Corrector , 2013, IEEE Transactions on Industrial Electronics.

[11]  Heinz van der Broeck,et al.  Power driver topologies and control schemes for LEDs , 2007, APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition.

[12]  Zhaoming Qian,et al.  Variable On-Time (VOT)-Controlled Critical Conduction Mode Buck PFC Converter for High-Input AC/DC HB-LED Lighting Applications , 2012, IEEE Transactions on Power Electronics.

[13]  V. Nagarajan,et al.  Charge pump boost converter with PLL using compensator technique , 2016, 2016 International Conference on Communication and Signal Processing (ICCSP).

[14]  Fei Zhang,et al.  A Novel PCCM Boost PFC Converter With Fast Dynamic Response , 2011, IEEE Transactions on Industrial Electronics.

[15]  Fanghua Zhang,et al.  High Power Factor AC–DC LED Driver With Film Capacitors , 2013, IEEE Transactions on Power Electronics.

[16]  Dianguo Xu,et al.  A CLCL Resonant DC/DC Converter for Two-Stage LED Driver System , 2016, IEEE Transactions on Industrial Electronics.

[17]  V. Srikanth,et al.  DC-DC converter control using IP controller , 2014, 2014 International Conference on Computation of Power, Energy, Information and Communication (ICCPEIC).

[18]  V. Srikanth,et al.  High efficiency control algorithm for power factor correction in air-conditioners , 2015, 2015 International Conference on Technological Advancements in Power and Energy (TAP Energy).

[19]  Guohua Zhou,et al.  Variable Duty Cycle Control for Quadratic Boost PFC Converter , 2016, IEEE Transactions on Industrial Electronics.

[20]  Dylan Dah-Chuan Lu,et al.  Analysis and design of a single-phase hybrid mode power factor correction converter , 2008 .

[21]  Chien-Hsuan Chang,et al.  Design and Implementation of a Single-Stage Driver for Supplying an LED Street-Lighting Module With Power Factor Corrections , 2015, IEEE Transactions on Power Electronics.

[22]  Ehsan Adib,et al.  Single soft switched isolated converter with constant output current for light emitting diode driver , 2014 .