Lithium-ion battery fast charging: A review
暂无分享,去创建一个
Xuning Feng | Minggao Ouyang | Gregory J. Offer | Ruihe Li | Jingyi Chen | Jiuyu Du | Xinhua Liu | Anna Tomaszewska | Zhengyu Chu | Simon E. J. O’Kane | Chenzhen Ji | Elizabeth Elaine Endler | Liu Lishuo | Yalun Li | Zheng Siqi | Sebastian Vetterlein | Ming Gao | Michael A. Parkes | Monica Marinescu | Billy Wu | Xuning Feng | M. Ouyang | M. Marinescu | G. Offer | M. Parkes | Billy Wu | Jiuyu Du | Mingming Gao | Yalun Li | Jingyi Chen | Xinhua Liu | Lishuo Liu | Zhengyu Chu | Siqi Zheng | C. Ji | Ruihe Li | S. O'Kane | A. Tomaszewska | S. Vetterlein | B. Wu | Elizabeth Endler | S. O’Kane
[1] Mahesh Krishnamurthy,et al. Challenges and Advancements in Fast Charging Solutions for EVs: A Technological Review , 2018, 2018 IEEE Transportation Electrification Conference and Expo (ITEC).
[2] Thomas Hanemann,et al. Preventing Li-ion cell explosion during thermal runaway with reduced pressure , 2017 .
[3] Ahmad Pesaran,et al. Thermal Evaluation of Toyota Prius Battery Pack , 2002 .
[4] Kang Xu,et al. Study of the charging process of a LiCoO2-based Li-ion battery , 2006 .
[5] Xuning Feng,et al. Thermal runaway mechanism of lithium ion battery for electric vehicles: A review , 2018 .
[6] Jun Yang,et al. Classification and Review of the Charging Strategies for Commercial Lithium-Ion Batteries , 2019, IEEE Access.
[7] Chaoyang Wang,et al. Lithium-ion battery structure that self-heats at low temperatures , 2016, Nature.
[8] Shanhai Ge,et al. Fast charging of lithium-ion batteries at all temperatures , 2018, Proceedings of the National Academy of Sciences.
[9] P. Notten,et al. A review on various temperature-indication methods for Li-ion batteries , 2019, Applied Energy.
[10] Delphine Riu,et al. A review on lithium-ion battery ageing mechanisms and estimations for automotive applications , 2013 .
[11] J.H.G. Op het Veld,et al. Boostcharging Li-ion batteries: A challenging new charging concept , 2005 .
[12] Ralph E. White,et al. Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries , 1998 .
[13] Andreas Gruhle,et al. Lithium flow between active area and overhang of graphite anodes as a function of temperature and overhang geometry , 2019, Journal of Energy Storage.
[14] P. Ajayan,et al. Synthesis of nitrogen-doped graphene films for lithium battery application. , 2010, ACS nano.
[15] Marius Bauer,et al. Fast charging of lithium-ion cells: Identification of aging-minimal current profiles using a design of experiment approach and a mechanistic degradation analysis , 2018, Journal of Energy Storage.
[16] Chaoyang Wang,et al. Innovative heating of large-size automotive Li-ion cells , 2017 .
[17] Y. Patel,et al. The effect of cell-to-cell variations and thermal gradients on the performance and degradation of lithium-ion battery packs , 2019, Applied Energy.
[18] Petr Novák,et al. Oxidative Electrolyte Solvent Degradation in Lithium‐Ion Batteries: An In Situ Differential Electrochemical Mass Spectrometry Investigation , 1999 .
[19] Piero Pianetta,et al. Thermally driven mesoscale chemomechanical interplay in Li0.5Ni0.6Mn0.2Co0.2O2 cathode materials , 2018 .
[20] Ilke Arslan,et al. Direct visualization of initial SEI morphology and growth kinetics during lithium deposition by in situ electrochemical transmission electron microscopy. , 2014, Chemical communications.
[21] John Newman,et al. Two-Dimensional Modeling of Lithium Deposition during Cell Charging , 2008 .
[22] Xiaoqing Zhu,et al. Overcharge investigation of large format lithium-ion pouch cells with Li(Ni0.6Co0.2Mn0.2)O2 cathode for electric vehicles: Thermal runaway features and safety management method , 2019, Energy.
[23] P. Kohl,et al. The effects of pulse charging on cycling characteristics of commercial lithium-ion batteries , 2001 .
[24] Zhong Li,et al. Niobium doped lithium titanate as a high rate anode material for Li-ion batteries , 2010 .
[25] Liwen Jin,et al. Thermal Management of Densely-packed EV Battery with Forced Air Cooling Strategies , 2016 .
[26] Ziping Feng,et al. Non-uniform effect on the thermal/aging performance of Lithium-ion pouch battery , 2018 .
[27] Ricardo Martinez-Botas,et al. An easy-to-parameterise physics-informed battery model and its application towards lithium-ion battery cell design, diagnosis, and degradation , 2018 .
[28] Yang Ren,et al. In situ high-energy X-ray diffraction to study overcharge abuse of 18650-size lithium-ion battery , 2013 .
[29] Sheldon S. Williamson,et al. A Closed-Loop Constant-Temperature Constant-Voltage Charging Technique to Reduce Charge Time of Lithium-Ion Batteries , 2019, IEEE Transactions on Industrial Electronics.
[30] Yoyo Hinuma,et al. Lithium Diffusion in Graphitic Carbon , 2010, 1108.0576.
[31] Piero Pianetta,et al. Chemomechanical interplay of layered cathode materials undergoing fast charging in lithium batteries , 2018, Nano Energy.
[32] Reiner Mönig,et al. Comparison of the growth of lithium filaments and dendrites under different conditions , 2015 .
[33] Jianqiu Li,et al. Non-destructive fast charging algorithm of lithium-ion batteries based on the control-oriented electrochemical model , 2017 .
[34] Jin Wang,et al. Charging Strategy Studies for PHEV Batteries based on Power Loss Model , 2010 .
[35] Kevin W. Eberman,et al. Colossal Reversible Volume Changes in Lithium Alloys , 2001 .
[36] Yatish Patel,et al. Preventing lithium ion battery failure during high temperatures by externally applied compression , 2017 .
[37] Shengbo Zhang. The effect of the charging protocol on the cycle life of a Li-ion battery , 2006 .
[38] Zhijia Du,et al. Understanding limiting factors in thick electrode performance as applied to high energy density Li-ion batteries , 2017, Journal of Applied Electrochemistry.
[39] Robert G. Landers,et al. A Single Particle Model for Lithium-Ion Batteries with Electrolyte and Stress-Enhanced Diffusion Physics , 2017 .
[40] Andreas Jossen,et al. Simulation and Measurement of the Current Density Distribution in Lithium-Ion Batteries by a Multi-Tab Cell Approach , 2017 .
[41] Martin Winter,et al. Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode. , 2015, Physical chemistry chemical physics : PCCP.
[42] Xuning Feng,et al. Low temperature aging mechanism identification and lithium deposition in a large format lithium iron phosphate battery for different charge profiles , 2015 .
[43] Gregory J. Offer,et al. How Observable Is Lithium Plating? Differential Voltage Analysis to Identify and Quantify Lithium Plating Following Fast Charging of Cold Lithium-Ion Batteries , 2019, Journal of The Electrochemical Society.
[44] Marcello Torchio,et al. Optimising lithium-ion cell design for plug-in hybrid and battery electric vehicles , 2019, Journal of Energy Storage.
[45] D. Sauer,et al. Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. I. Experimental investigation , 2011 .
[46] Ricardo Martinez-Botas,et al. A physically meaningful equivalent circuit network model of a lithium-ion battery accounting for local electrochemical and thermal behaviour, variable double layer capacitance and degradation , 2016 .
[47] Sohel Anwar,et al. Electrochemical model based charge optimization for lithium-ion batteries , 2016 .
[48] Thanh Tu Vo,et al. Charging algorithms of lithium-ion batteries: An overview , 2012, 2012 7th IEEE Conference on Industrial Electronics and Applications (ICIEA).
[49] Chao-Yang Wang,et al. Understanding the trilemma of fast charging, energy density and cycle life of lithium-ion batteries , 2018, Journal of Power Sources.
[50] Kevin G. Gallagher,et al. Optimizing areal capacities through understanding the limitations of lithium-ion electrodes , 2016 .
[51] Chaoyang Wang,et al. Li-Ion Cell Operation at Low Temperatures , 2013 .
[52] Jeonghun Cho,et al. Pulse-Based Fast Battery IoT Charger Using Dynamic Frequency and Duty Control Techniques Based on Multi-Sensing of Polarization Curve , 2016 .
[53] Jianqiu Li,et al. Investigation of Lithium Plating-Stripping Process in Li-Ion Batteries at Low Temperature Using an Electrochemical Model , 2018 .
[54] Andreas Gruhle,et al. A new method for detecting lithium plating by measuring the cell thickness , 2014 .
[55] Lijun Wu,et al. Structural Origin of Overcharge-Induced Thermal Instability of Ni-Containing Layered-Cathodes for High-Energy-Density Lithium Batteries , 2011 .
[56] Moses Ender,et al. In situ detection of lithium metal plating on graphite in experimental cells , 2015 .
[57] Magnus Rohde,et al. Thermal behavior and electrochemical heat generation in a commercial 40 Ah lithium ion pouch cell , 2015 .
[58] Bing Xia,et al. Loss-Minimization-Based Charging Strategy for Lithium-Ion Battery , 2015, IEEE Transactions on Industry Applications.
[59] Xiangyun Song,et al. Correlation between dissolution behavior and electrochemical cycling performance for LiNi1/3Co1/3Mn1/3O2-based cells , 2012 .
[60] Chao-Yang Wang,et al. In-Situ Measurement of Current Distribution in a Li-Ion Cell , 2013 .
[61] Sylvie Grugeon,et al. Deciphering the multi-step degradation mechanisms of carbonate-based electrolyte in Li batteries , 2008 .
[62] Feiyu Kang,et al. Structural and thermal stabilities of layered Li(Ni1/3Co1/3Mn1/3)O2 materials in 18650 high power batteries , 2011 .
[63] M. Wohlfahrt‐Mehrens,et al. Li plating as unwanted side reaction in commercial Li-ion cells - A review , 2018 .
[64] Rolf Findeisen,et al. Electrochemical Model Based Observer Design for a Lithium-Ion Battery , 2013, IEEE Transactions on Control Systems Technology.
[65] Hansu Kim,et al. Improved fast charging capability of graphite anodes via amorphous Al2O3 coating for high power lithium ion batteries , 2019, Journal of Power Sources.
[66] Joeri Van Mierlo,et al. Three-dimensional electro-thermal model of li-ion pouch cell: Analysis and comparison of cell design factors and model assumptions , 2017 .
[67] Qing Zhao,et al. Building Organic/Inorganic Hybrid Interphases for Fast Interfacial Transport in Rechargeable Metal Batteries , 2018 .
[68] Jianming Zheng,et al. Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries , 2017, Nature Communications.
[69] U. V. Varadaraju,et al. Facile Insertion of Lithium into Nanocrystalline AlNbO4 at Room Temperature. , 2008 .
[70] Edgar Sánchez-Sinencio,et al. Search for Optimal Pulse Charging Parameters for Li-Ion Polymer Batteries Using Taguchi Orthogonal Arrays , 2018, IEEE Transactions on Industrial Electronics.
[71] Thomas J. Richardson,et al. Visualization of Charge Distribution in a Lithium Battery Electrode , 2010 .
[72] W. Craig Carter,et al. Design criteria for electrochemical shock resistant battery electrodes , 2012 .
[73] Zhe Li,et al. Temperature-Adaptive Alternating Current Preheating of Lithium-Ion Batteries with Lithium Deposition Prevention , 2016 .
[74] B. Liaw,et al. A review of lithium deposition in lithium-ion and lithium metal secondary batteries , 2014 .
[75] Margret Wohlfahrt-Mehrens,et al. Aging mechanisms of lithium cathode materials , 2004 .
[76] Jeff Dahn,et al. Exploring Classes of Co-Solvents for Fast-Charging Lithium-Ion Cells , 2018 .
[77] Xiaosong Hu,et al. Charging optimization in lithium-ion batteries based on temperature rise and charge time , 2017 .
[78] U. Landau,et al. Rapid Charging of Lithium-Ion Batteries Using Pulsed Currents A Theoretical Analysis , 2006 .
[79] Alan C. West,et al. Effect of Electrolyte Composition on Lithium Dendrite Growth , 2008 .
[80] Shanhai Ge,et al. A look into the voltage plateau signal for detection and quantification of lithium plating in lithium-ion cells , 2018, Journal of Power Sources.
[81] B. Vural,et al. A dynamic lithium-ion battery model considering the effects of temperature and capacity fading , 2009, 2009 International Conference on Clean Electrical Power.
[82] Yang-Tse Cheng,et al. Electrode Side Reactions, Capacity Loss and Mechanical Degradation in Lithium-Ion Batteries , 2015 .
[83] Nikolay Dimov,et al. Suppression of lithium deposition at sub-zero temperatures on graphite by surface modification , 2011 .
[84] Xuning Feng,et al. Influence of aging paths on the thermal runaway features of lithium-ion batteries in accelerating rate calorimetry tests , 2019, International Journal of Electrochemical Science.
[85] M. Verbrugge,et al. The effect of large negative potentials and overcharge on the electrochemical performance of lithiated carbon , 1997 .
[86] Richard Barney Carlson,et al. Enabling fast charging – A battery technology gap assessment , 2017 .
[87] Weige Zhang,et al. Study on battery pack consistency evolutions and equilibrium diagnosis for serial- connected lithium-ion batteries , 2017 .
[88] Seungjun Lee,et al. Mechanical Failure Analysis of Graphite Anode Particles with PVDF Binders in Li-Ion Batteries , 2018 .
[89] Christopher J. Orendorff,et al. How Electrolytes Influence Battery Safety. , 2012 .
[90] E. Roth,et al. Thermal abuse performance of high-power 18650 Li-ion cells , 2004 .
[91] M. Wohlfahrt‐Mehrens,et al. Interaction of cyclic ageing at high-rate and low temperatures and safety in lithium-ion batteries , 2015 .
[92] Marc Doyle,et al. Mathematical Modeling of the Lithium Deposition Overcharge Reaction in Lithium‐Ion Batteries Using Carbon‐Based Negative Electrodes , 1999 .
[93] Minggao Ouyang,et al. Time Sequence Map for Interpreting the Thermal Runaway Mechanism of Lithium-Ion Batteries With LiNixCoyMnzO2 Cathode , 2018, Front. Energy Res..
[94] Florian Bouville,et al. Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries , 2016, Nature Energy.
[95] Bor Yann Liaw,et al. Optimal charging method for lithium ion batteries using a universal voltage protocol accommodating aging , 2015 .
[96] Daniel P. Abraham,et al. Quantifying lithium concentration gradients in the graphite electrode of Li-ion cells using operando energy dispersive X-ray diffraction , 2019, Energy & Environmental Science.
[97] Reza S. Yassar,et al. Real-time observation of lithium fibers growth inside a nanoscale lithium-ion battery , 2011 .
[98] Richard Barney Carlson,et al. Enabling fast charging – Vehicle considerations , 2017 .
[99] Thomas Waldmann,et al. Optimization of Charging Strategy by Prevention of Lithium Deposition on Anodes in high-energy Lithium-ion Batteries – Electrochemical Experiments , 2015 .
[100] Kejie Zhao,et al. Disintegration of Meatball Electrodes for LiNixMnyCozO2 Cathode Materials , 2018 .
[101] Francesco Nobili,et al. Low-temperature behavior of graphite-tin composite anodes for Li-ion batteries , 2010 .
[102] Rolf Findeisen,et al. Optimal charging strategies in lithium-ion battery , 2011, Proceedings of the 2011 American Control Conference.
[103] Ellen Ivers-Tiffée,et al. A novel and precise measuring method for the entropy of lithium-ion cells: ΔS via electrothermal impedance spectroscopy , 2014 .
[104] Geping Yin,et al. Understanding undesirable anode lithium plating issues in lithium-ion batteries , 2016 .
[105] Andreas Jossen,et al. Multi-directional laser scanning as innovative method to detect local cell damage during fast charging of lithium-ion cells , 2016 .
[106] Masahiro Kinoshita,et al. Capacity fade of LiAlyNi1−x−yCoxO2 cathode for lithium-ion batteries during accelerated calendar and cycle life tests (surface analysis of LiAlyNi1−x−yCoxO2 cathode after cycle tests in restricted depth of discharge ranges) , 2014 .
[107] Ting Zhu,et al. Electrochemomechanical degradation of high-capacity battery electrode materials , 2017 .
[108] Li Wang,et al. Probing the heat sources during thermal runaway process by thermal analysis of different battery chemistries , 2018 .
[109] Dongqiang Liu,et al. Lithium Ion Intercalation Performance of Niobium Oxides: KNb5O13 and K6Nb10.8O30 , 2009 .
[110] Byung-Ki Na,et al. Manufacturing and Electrochemical Characteristics of SnO 2 /Li 4 Ti 5 O 12 for Lithium Ion Battery , 2015 .
[111] L. Wang,et al. A rapid low-temperature internal heating strategy with optimal frequency based on constant polarization voltage for lithium-ion batteries , 2016 .
[112] Chaohe Xu,et al. Graphene-based electrodes for electrochemical energy storage , 2013 .
[113] C. Wan,et al. Thermal Stability of the Solid Electrolyte Interface on Carbon Electrodes of Lithium Batteries , 2004 .
[114] Mark W. Verbrugge,et al. Degradation of lithium ion batteries employing graphite negatives and nickel–cobalt–manganese oxide + spinel manganese oxide positives: Part 2, chemical–mechanical degradation model , 2014 .
[115] Javad Askari,et al. A charging method for Lithium-ion battery using Min-max optimal control , 2014, 2014 22nd Iranian Conference on Electrical Engineering (ICEE).
[116] Zhe Li,et al. Modeling the capacity degradation of LiFePO 4/graphite batteries based on stress coupling analysis , 2011 .
[117] K. Jalkanen,et al. Entropy change effects on the thermal behavior of a LiFePO4/graphite lithium-ion cell at different states of charge , 2013 .
[118] Yan Wang,et al. The design of a high-energy Li-ion battery using germanium-based anode and LiCoO2 cathode , 2015 .
[119] Zongping Shao,et al. Synthesis of pristine and carbon-coated Li4Ti5O12 and their low-temperature electrochemical performance , 2010 .
[120] Jianqiu Li,et al. Thermal Runaway of Lithium-Ion Batteries without Internal Short Circuit , 2018, Joule.
[121] John B. Goodenough,et al. 3-V Full Cell Performance of Anode Framework TiNb2O7/Spinel LiNi0.5Mn1.5O4 , 2011 .
[122] Martin Winter,et al. How Do Reactions at the Anode/Electrolyte Interface Determine the Cathode Performance in Lithium-Ion Batteries? , 2013 .
[123] Amartya Mukhopadhyay,et al. Deformation and stress in electrode materials for Li-ion batteries , 2014 .
[124] Masahiro Kinoshita,et al. Capacity fading of LiAlyNi1−x−yCoxO2 cathode for lithium-ion batteries during accelerated calendar and cycle life tests (effect of depth of discharge in charge–discharge cycling on the suppression of the micro-crack generation of LiAlyNi1−x−yCoxO2 particle) , 2014 .
[125] Qiujiang Liu,et al. Evaluation of Acceptable Charging Current of Power Li-Ion Batteries Based on Polarization Characteristics , 2014, IEEE Transactions on Industrial Electronics.
[126] Harald Scholz,et al. Evaluation of Fast Charging Efficiency under Extreme Temperatures , 2018, Energies.
[127] Li Jia,et al. A pseudo three-dimensional electrochemical–thermal model of a prismatic LiFePO4 battery during discharge process , 2015 .
[128] Siamak Farhad,et al. Heat generation in lithium-ion batteries with different nominal capacities and chemistries , 2017 .
[129] Bor Yann Liaw,et al. Fast charge implications: Pack and cell analysis and comparison , 2018 .
[130] Charles Delacourt,et al. Experimental and Modeling Analysis of Graphite Electrodes with Various Thicknesses and Porosities for High-Energy-Density Li-Ion Batteries , 2018 .
[131] Juha Pyrhonen,et al. Determination of the entropy change profile of a cylindrical lithium-ion battery by heat flux measurements , 2016 .
[132] M. Wohlfahrt‐Mehrens,et al. Ageing mechanisms in lithium-ion batteries , 2005 .
[133] Sean Parkin,et al. A fast, inexpensive method for predicting overcharge performance in lithium-ion batteries , 2014 .
[134] Linsen Li,et al. High-performance battery electrodes via magnetic templating , 2016, Nature Energy.
[135] Michael G. Pecht,et al. Tab Design and Failures in Cylindrical Li-ion Batteries , 2019, IEEE Access.
[136] Bernard Bäker,et al. Current density and state of charge inhomogeneities in Li-ion battery cells with LiFePO4 as cathode material due to temperature gradients , 2011 .
[137] M. Dubarry,et al. Operando lithium plating quantification and early detection of a commercial LiFePO 4 cell cycled under dynamic driving schedule , 2017 .
[138] Daniel P. Abraham,et al. First-cycle irreversibility of layered Li–Ni–Co–Mn oxide cathode in Li-ion batteries , 2008 .
[139] J. C. Burns,et al. In-Situ Detection of Lithium Plating Using High Precision Coulometry , 2015 .
[140] Mary Patterson. Chemical Shuttle Additives in Lithium Ion Batteries , 2013 .
[141] Ardalan Vahidi,et al. Maximizing charging efficiency of lithium-ion and lead-acid batteries using optimal control theory , 2015, 2015 American Control Conference (ACC).
[142] M. Wohlfahrt‐Mehrens,et al. Electrochemical, Post-Mortem, and ARC Analysis of Li-Ion Cell Safety in Second-Life Applications , 2017 .
[143] Jun Li,et al. Fast lithium growth and short circuit induced by localized-temperature hotspots in lithium batteries , 2019, Nature Communications.
[144] Zhenan Bao,et al. Fast and reversible thermoresponsive polymer switching materials for safer batteries , 2016, Nature Energy.
[145] Jianqiu Li,et al. Simplification of physics-based electrochemical model for lithium ion battery on electric vehicle. Part II: Pseudo-two-dimensional model simplification and state of charge estimation , 2015 .
[146] Gan Ning,et al. Capacity fade study of lithium-ion batteries cycled at high discharge rates , 2003 .
[147] Joeri Van Mierlo,et al. Influence analysis of static and dynamic fast-charging current profiles on ageing performance of commercial lithium-ion batteries , 2017 .
[148] Zhansheng Guo,et al. Direct in situ observation and explanation of lithium dendrite of commercial graphite electrodes , 2015 .
[149] Kazuma Gotoh,et al. In Situ Solid State 7Li NMR Observations of Lithium Metal Deposition during Overcharge in Lithium Ion Batteries , 2015 .
[150] Jian Li,et al. Efficient thermal management of Li-ion batteries with a passive interfacial thermal regulator based on a shape memory alloy , 2018, Nature Energy.
[151] A. Jossen,et al. Fast and Accurate Measurement of Entropy Profiles of Commercial Lithium-Ion Cells , 2015 .
[152] Qingsong Wang,et al. Thermal runaway caused fire and explosion of lithium ion battery , 2012 .
[153] David Anseán,et al. Fast charging technique for high power lithium iron phosphate batteries: A cycle life analysis , 2013 .
[154] Robert Kostecki,et al. Electrochemical activity of carbon blacks in LiPF6-based organic electrolytes , 2013 .
[155] Wei Zhao,et al. Effect of tab design on large-format Li-ion cell performance , 2014 .
[156] Xiaosong Hu,et al. Optimal charging of batteries via a single particle model with electrolyte and thermal dynamics , 2016, 2016 American Control Conference (ACC).
[157] Minhua Shao,et al. In situ microscopic studies on the structural and chemical behaviors of lithium-ion battery materials , 2014 .
[158] Qingsong Wang,et al. Thermal Behavior of Lithiated Graphite with Electrolyte in Lithium-Ion Batteries , 2006 .
[159] V. K. Peterson,et al. Overcharging a lithium-ion battery: Effect on the LixC6 negative electrode determined by in situ neutron diffraction , 2013 .
[160] Henk Nijmeijer,et al. Battery thermal management by boiling heat-transfer , 2014 .
[161] Vincent Chevrier,et al. In Situ Detection of Lithium Plating on Graphite Electrodes by Electrochemical Calorimetry , 2013 .
[162] Lei Cao,et al. A review on battery thermal management in electric vehicle application , 2017 .
[163] Thomas R. B. Grandjean,et al. Large format lithium ion pouch cell full thermal characterisation for improved electric vehicle thermal management , 2017 .
[164] Philippe Marty,et al. Experimental performances of a battery thermal management system using a phase change material , 2014 .
[165] Yuichi Sato,et al. Overcharge reaction of lithium-ion batteries , 2005 .
[166] Martin Knipper,et al. Hysteresis and current dependence of the graphite anode color in a lithium-ion cell and analysis of lithium plating at the cell edge , 2018 .
[167] F. Chevallier,et al. In situ 7Li nuclear magnetic resonance observation of the electrochemical intercalation of lithium in graphite; 1st cycle , 2007 .
[168] M. Wohlfahrt‐Mehrens,et al. Temperature dependent ageing mechanisms in Lithium-ion batteries – A Post-Mortem study , 2014 .
[169] Guangyuan Zheng,et al. Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal. , 2017, Nano letters.
[170] Michael A. Danzer,et al. Nondestructive detection, characterization, and quantification of lithium plating in commercial lithium-ion batteries , 2014 .
[171] Michio Inagaki,et al. Carbon-coated graphite for anode of lithium ion rechargeable batteries: Graphite substrates for carbon coating , 2009 .
[172] Andreas Jossen,et al. Charging protocols for lithium-ion batteries and their impact on cycle life—An experimental study with different 18650 high-power cells , 2016 .
[173] William A Goddard,et al. Dynamics of Lithium Dendrite Growth and Inhibition: Pulse Charging Experiments and Monte Carlo Calculations. , 2014, The journal of physical chemistry letters.
[174] Yi Cui,et al. Challenges and opportunities towards fast-charging battery materials , 2019, Nature Energy.
[175] Michael M. Thackeray,et al. Spinel Anodes for Lithium‐Ion Batteries , 1994 .
[176] Shaojun Guo,et al. MoS2 Nanosheet Assembling Superstructure with a Three-Dimensional Ion Accessible Site: A New Class of Bifunctional Materials for Batteries and Electrocatalysis , 2016 .
[177] Alberto Salvadori,et al. Computational modeling of Li-ion batteries , 2016 .
[178] Marshall C. Smart,et al. Factors Limiting Li + Charge Transfer Kinetics in Li-Ion Batteries , 2017 .
[179] Kristina Edström,et al. Chemical Composition and Morphology of the Elevated Temperature SEI on Graphite , 2001 .
[180] Chaoyang Wang,et al. Heating strategies for Li-ion batteries operated from subzero temperatures , 2013 .
[181] Remi Petibon,et al. Effects of Electrolyte Additives and Solvents on Unwanted Lithium Plating in Lithium-Ion Cells , 2017 .
[182] Simon F. Schuster,et al. Nonlinear aging of cylindrical lithium-ion cells linked to heterogeneous compression , 2016 .
[183] Chris Manzie,et al. PDE battery model simplification for charging strategy evaluation , 2015, 2015 10th Asian Control Conference (ASCC).
[184] She-huang Wu,et al. Preparation of Advanced Carbon Anode Materials from Mesocarbon Microbeads for Use in High C-Rate Lithium Ion Batteries , 2015, Materials.
[185] Gregory J. Offer,et al. Modeling the effects of thermal gradients induced by tab and surface cooling on lithium ion cell performance , 2018 .
[186] Bob R. Powell,et al. Lithium Polyacrylate (LiPAA) as an Advanced Binder and a Passivating Agent for High‐Voltage Li‐Ion Batteries , 2015 .
[187] Kyung Min Jeong,et al. Effects of Capacity Ratios between Anode and Cathode on Electrochemical Properties for Lithium Polymer Batteries , 2015 .
[188] Xiaodong Zheng,et al. High-rate Li4Ti5O12/C composites as anode for lithium-ion batteries , 2013, Ionics.
[189] Jianqiu Li,et al. Simplification of physics-based electrochemical model for lithium ion battery on electric vehicle. Part I: Diffusion simplification and single particle model , 2015 .
[190] Ralph E. White,et al. Maximizing the Life of a Lithium-Ion Cell by Optimization of Charging Rates , 2010 .
[191] Martin Z. Bazant,et al. Toward Optimal Performance and In‐Depth Understanding of Spinel Li4Ti5O12 Electrodes through Phase Field Modeling , 2018 .
[192] Yan Yu,et al. A Review on Lithium-Ion Batteries Safety Issues: Existing Problems and Possible Solutions , 2012 .
[193] Hao Mu,et al. Research on the Battery Charging Strategy With Charging and Temperature Rising Control Awareness , 2018, IEEE Access.
[194] Yi Cui,et al. Reviving the lithium metal anode for high-energy batteries. , 2017, Nature nanotechnology.
[195] Scott J. Moura,et al. BATTERY CHARGE CONTROL WITH AN ELECTRO-THERMAL-AGING COUPLING , 2015 .
[196] Yury Gogotsi,et al. Thickness-independent capacitance of vertically aligned liquid-crystalline MXenes , 2018, Nature.
[197] Hailong Chen,et al. In situ NMR observation of the formation of metallic lithium microstructures in lithium batteries. , 2010, Nature materials.
[198] Katsuhito Takei,et al. Gas generation mechanism due to electrolyte decomposition in commercial lithium-ion cell , 1999 .
[199] Minggao Ouyang,et al. Thermal runaway features of large format prismatic lithium ion battery using extended volume accelerating rate calorimetry , 2014 .
[200] Song-Yul Choe,et al. Fast charging method based on estimation of ion concentrations using a reduced order of Electrochemical Thermal Model for lithium ion polymer battery , 2013, 2013 World Electric Vehicle Symposium and Exhibition (EVS27).
[201] Toshiyuki Momma,et al. In situ observation of lithium deposition processes in solid polymer and gel electrolytes , 1997 .
[202] Kyeongse Song,et al. Carbon‐Coated Si Nanoparticles Anchored between Reduced Graphene Oxides as an Extremely Reversible Anode Material for High Energy‐Density Li‐Ion Battery , 2016 .
[203] Christopher D. Rahn,et al. Effects of Non-Uniform Current Distribution on Energy Density of Li-Ion Cells , 2013 .
[204] Zhe Li,et al. Investigating Lithium Plating in Lithium-Ion Batteries at Low Temperatures Using Electrochemical Model with NMR Assisted Parameterization , 2017 .
[205] K. M. Abraham,et al. Thermal stability of lithium-ion battery electrolytes , 2003 .
[206] Gregory L. Plett,et al. Controls oriented reduced order modeling of lithium deposition on overcharge , 2012 .
[207] Nigel P. Brandon,et al. Coupled thermal–electrochemical modelling of uneven heat generation in lithium-ion battery packs , 2013 .
[208] Giannantonio Cibin,et al. Niobium tungsten oxides for high-rate lithium-ion energy storage , 2018, Nature.
[209] Bor Yann Liaw,et al. Lithium Plating Detection and Quantification in Li-Ion Cells from Degradation Behaviors , 2017 .
[210] Haifeng Dai,et al. Experimental investigations of an AC pulse heating method for vehicular high power lithium-ion batteries at subzero temperatures , 2017 .
[211] Yury Gogotsi,et al. Hollow MXene Spheres and 3D Macroporous MXene Frameworks for Na‐Ion Storage , 2017, Advanced materials.
[212] M. Doyle,et al. Simulation and Optimization of the Dual Lithium Ion Insertion Cell , 1994 .
[213] Andreas Jossen,et al. Optimum fast charging of lithium-ion pouch cells based on local volume expansion criteria , 2018, Journal of Power Sources.
[214] P. Ramadass,et al. Analysis of internal short-circuit in a lithium ion cell , 2009 .
[215] Alexander W. Abboud,et al. Communication—Implications of Local Current Density Variations on Lithium Plating Affected by Cathode Particle Size , 2019, Journal of The Electrochemical Society.
[216] Göran Lindbergh,et al. Fast-charging to a partial state of charge in lithium-ion batteries: A comparative ageing study , 2017 .
[217] Ralph E. White,et al. Comparison of the capacity fade of Sony US 18650 cells charged with different protocols , 2003 .
[218] Gregory J. Offer,et al. Surface Cooling Causes Accelerated Degradation Compared to Tab Cooling for Lithium-Ion Pouch Cells , 2016 .
[219] Feng Li,et al. Doped graphene sheets as anode materials with superhigh rate and large capacity for lithium ion batteries. , 2011, ACS nano.
[220] Zhigang Suo,et al. Fracture of electrodes in lithium-ion batteries caused by fast charging , 2010 .
[221] Alexander Michaelis,et al. Local Heat Generation in a Single Stack Lithium Ion Battery Cell , 2015 .
[222] P. Bruce,et al. Degradation diagnostics for lithium ion cells , 2017 .
[223] Chen‐Zi Zhao,et al. Fast Charging Lithium Batteries: Recent Progress and Future Prospects. , 2019, Small.
[224] Ui Seong Kim,et al. Modeling the Thermal Behaviors of a Lithium-Ion Battery during Constant-Power Discharge and Charge Operations , 2013 .
[225] Ulrike Krewer,et al. Identification of Lithium Plating in Lithium-Ion Batteries using Nonlinear Frequency Response Analysis (NFRA) , 2018, Electrochimica Acta.
[226] Takamitsu Tajima,et al. Boiling Liquid Battery Cooling for Electric Vehicle , 2014, 2014 IEEE Conference and Expo Transportation Electrification Asia-Pacific (ITEC Asia-Pacific).
[227] Ningning Wu,et al. Electrochemical and Mechanical Failure of Graphite-Based Anode Materials in Li-Ion Batteries for Electric Vehicles , 2016 .
[228] Feng Lin,et al. Chemomechanical behaviors of layered cathode materials in alkali metal ion batteries , 2018 .
[229] Venkat Srinivasan,et al. Examination of Graphite Particle Cracking as a Failure Mode in Lithium-Ion Batteries: A Model-Experimental Study , 2015 .
[230] Xuemei Zhao,et al. A High Precision Coulometry Study of the SEI Growth in Li/Graphite Cells , 2011 .
[231] Yi Cui,et al. Fracture of crystalline silicon nanopillars during electrochemical lithium insertion , 2012, Proceedings of the National Academy of Sciences.
[232] Aniruddha Jana,et al. Lithium dendrite growth mechanisms in liquid electrolytes , 2017 .
[233] Ottorino Veneri,et al. Technologies and Applications for Smart Charging of Electric and Plug-in Hybrid Vehicles , 2017 .
[234] Jianqiu Li,et al. Model-based thermal runaway prediction of lithium-ion batteries from kinetics analysis of cell components , 2018, Applied Energy.
[235] Alexej Jerschow,et al. Correlating Microstructural Lithium Metal Growth with Electrolyte Salt Depletion in Lithium Batteries Using ⁷Li MRI. , 2015, Journal of the American Chemical Society.
[236] V. Presser,et al. Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2 , 2011, Advanced materials.
[237] Bryant J. Polzin,et al. Extreme Fast Charge Challenges for Lithium-Ion Battery: Variability and Positive Electrode Issues , 2019, Journal of The Electrochemical Society.
[238] Jianqiu Li,et al. An electrochemical-thermal coupled overcharge-to-thermal-runaway model for lithium ion battery , 2017 .
[239] Partha P. Mukherjee,et al. Analysis of the Implications of Rapid Charging on Lithium-Ion Battery Performance , 2015 .
[240] Phl Peter Notten,et al. Mathematical modelling of ionic transport in the electrolyte of Li-ion batteries , 2008 .
[241] Marius Bauer,et al. Voltage relaxation and impedance spectroscopy as in-operando methods for the detection of lithium plating on graphitic anodes in commercial lithium-ion cells , 2016 .
[242] John P. Sullivan,et al. Lithium Fiber Growth on the Anode in a Nanowire Lithium Ion Battery During Charging , 2011 .
[243] W. Craig Carter,et al. “Electrochemical Shock” of Intercalation Electrodes: A Fracture Mechanics Analysis , 2010 .
[244] Li Wang,et al. A Coupled Electrochemical-Thermal Failure Model for Predicting the Thermal Runaway Behavior of Lithium-Ion Batteries , 2018 .
[245] Prashant N. Kumta,et al. Interfacial Properties of the a-Si ∕ Cu :Active–Inactive Thin-Film Anode System for Lithium-Ion Batteries , 2006 .
[246] Tsair-Rong Chen,et al. Sinusoidal-Ripple-Current Charging Strategy and Optimal Charging Frequency Study for Li-Ion Batteries , 2013, IEEE Transactions on Industrial Electronics.
[247] Jianqiu Li,et al. Overcharge-induced capacity fading analysis for large format lithium-ion batteries with LiyNi1/3Co1/3Mn1/3O2 + LiyMn2O4 composite cathode , 2015 .
[248] James Francfort,et al. Enabling fast charging – Battery thermal considerations , 2017 .
[249] Jeff Dahn,et al. Quantifying inhomogeneity of lithium ion battery electrodes and its influence on electrochemical performance , 2018 .
[250] Arnulf Latz,et al. Influence of local lithium metal deposition in 3D microstructures on local and global behavior of Lithium-ion batteries , 2016 .
[251] Christoph Rau,et al. Three-dimensional characterization of electrodeposited lithium microstructures using synchrotron X-ray phase contrast imaging. , 2015, Chemical communications.
[252] M. Doyle,et al. Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell , 1993 .
[253] Kang Xu,et al. Optimization of the forming conditions of the solid-state interface in the Li-ion batteries , 2004 .
[254] Ilias Belharouak,et al. Identifying the limiting electrode in lithium ion batteries for extreme fast charging , 2018, Electrochemistry Communications.
[255] Bo Lu,et al. Stress-limited fast charging methods with time-varying current in lithium-ion batteries , 2018, Electrochimica Acta.
[256] Ralph E. White,et al. Effect of Porosity on the Capacity Fade of a Lithium-Ion Battery Theory , 2004 .
[257] Andreas Jossen,et al. Lithium plating in lithium-ion batteries investigated by voltage relaxation and in situ neutron diffraction , 2017 .
[258] Yi Cui,et al. Composite lithium metal anode by melt infusion of lithium into a 3D conducting scaffold with lithiophilic coating , 2016, Proceedings of the National Academy of Sciences.
[259] M Rosa Palacín,et al. Understanding ageing in Li-ion batteries: a chemical issue. , 2018, Chemical Society reviews.
[260] Michael R Hoffmann,et al. Quantifying the dependence of dead lithium losses on the cycling period in lithium metal batteries. , 2014, Physical chemistry chemical physics : PCCP.