论文信息 - A micromechanical model for plastic behavior of fibrous composites

A micromechanical model for plastic behavior of fibrous composites

Abstract A simple micromechanical model is developed to described the elastic-plastic behavior of fibrous composites. In the model, the fiber is assumed to be linearly elastic, and the matrix elastic-plastic following the J 2 -flow rule. The micromechanical model is used to calculate stress-strain curves for off-axis boron/aluminum composites. These curves are used in turn to model a macromechanical orthotropic plasticity model.

C. Sun | C. T. Sun | J. L. Chen | J. Chen

[1] Donald F. Adams,et al. Inelastic Analysis of a Unidirectional Composite Subjected to Transverse Normal Loading , 1970 .

[2] G. Dvorak,et al. Plasticity Analysis of Fibrous Composites , 1982 .

[3] George J. Dvorak,et al. Plastic Deformation of a Laminated Plate With a Hole , 1980 .

[4] George J. Dvorak,et al. Elastic-plastic behavior of fibrous composites , 1979 .

[5] D. Salinas,et al. Initial Yield Surface of a Unidirectionally Reinforced Composite , 1972 .

[6] C. Sun,et al. A Simple Flow Rule for Characterizing Nonlinear Behavior of Fiber Composites , 1989 .

[7] A. Mendelson. Plasticity: Theory and Application , 1968 .

[8] R. Foye. Theoretical Post-Yielding Behavior of Composite Laminates Part I—Inelastic Micromechanics , 1973 .

[9] James F. Doyle,et al. The Characterization of Boron/Aluminum Composite in the Nonlinear Range as an Orthotropic Elastic-Plastic Material , 1987 .