Micro-scale rapid prototyping by stereolithography

A new process of microstereolithography to manufacture freeform solid three-dimensional micro-components with outer dimensions in the millimetre size range is presented. It corresponds to a layered micromachining, specially suited to rapid prototyping at the micro scale. Different kinds of materials can be employed, like pure polymers or alumina-based composites. The micromachine is mainly composed of a liquid crystal display as a dynamic mask generator and of a broad-band visible light source. The manufacture of complex three dimensional microparts demonstrates the possibilities of the process specially when concerned with composite alumina-based microstructures. Its availability to realise pure sintered alumina microcomponents is also shown.

[1]  Satoshi Kawata,et al.  Two-photon-absorbed near-infrared photopolymerization for three-dimensional microfabrication , 1998 .

[2]  Kenichi Takahata,et al.  High-aspect-ratio WC-Co microstructure produced by the combination of LIGA and micro-EDM , 2000 .

[3]  T. Chartier,et al.  Stereolithography for the fabrication of ceramic three‐ dimensional parts , 1998 .

[4]  P Birch,et al.  Microfabrication by use of a spatial light modulator in the ultraviolet: experimental results. , 1999, Optics letters.

[5]  Martin D. B. Charlton,et al.  Fabrication of high aspect ratio silicon microstructures by anodic etching , 1997 .

[6]  Holger Becker,et al.  Hot embossing as a method for the fabrication of polymer high aspect ratio structures , 2000 .

[7]  Takeshi Nakamoto,et al.  Manufacturing of three-dimensional micro-parts by UV laser induced polymerization , 1996 .

[8]  Hugues Giovannini,et al.  New process for manufacturing ceramic microfluidic devices for microreactor and bioanalytical applications , 2001 .

[9]  Xiaoning Jiang,et al.  Microstereolithography of lead zirconate titanate thick film on silicon substrate , 2000 .

[10]  Paul F. Jacobs,et al.  Rapid Prototyping & Manufacturing: Fundamentals of Stereolithography , 1992 .

[11]  N. D. Rooij,et al.  High aspect ratio UV photolithography for electroplated structures , 1999 .

[12]  Ivo W. Rangelow.  Reactive ion etching for high aspect ratio silicon micromachining , 1997 .

[13]  Craig R. Friedrich,et al.  The micromilling process for high aspect ratio microstructures , 1995 .

[14]  Peter Vettiger,et al.  High-aspect-ratio, ultrathick, negative-tone near-UV photoresist and its applications for MEMS , 1998 .

[15]  C. Cremers,et al.  Microfabrication: LIGA-X and applications , 2000 .

[16]  K.K.B. Hon,et al.  Optimising build parameters for improved surface finish in stereolithography , 1998 .

[17]  P. Dario,et al.  A piezoelectric-driven stereolithography-fabricated micropump , 1995 .

[18]  Serge Monneret,et al.  Microstereolithography using a dynamic mask generator and a noncoherent visible light source , 1999, Design, Test, Integration, and Packaging of MEMS/MOEMS.

[19]  P. McNally,et al.  A comparative study of Pd/Sn/Au, Au/Ge/Au/Ni/Au, Au-Ge/Ni and Ni/Au-Ge/Ni ohmic contacts to n-GaAs , 1998 .

[20]  S. Monneret,et al.  Microstereolithography using a dynamic mask for microactuators fabrication , 2000 .

[21]  Cheng Sun,et al.  Micro-stereolithography of polymeric and ceramic microstructures , 1999 .

[22]  Philip Birch,et al.  A novel high-accuracy microstereolithography method employing an adaptive electro-optic mask , 2000 .

[23]  S. Zissi,et al.  Microstereophotolithography using a liquid crystal display as dynamic mask-generator , 1997 .