Layered corrugated electrode macrostructures boost microbial bioelectrocatalysis

The future success of microbial bioelectrochemical systems like microbial fuel cells inevitably depends on the increase of their performance at decreasing material costs. One of the key elements and a research priority is the biofuel cell anode. Here we propose layered corrugated carbon (LCC) as an inexpensive but high performance electrode material produced from the carbonization of one of the most abundant packing materials of our society: corrugated cardboard. In the base configuration of one corrugated layer the projected current density of LCC already reaches 70 A m−2. Increasing the number of corrugated layers increases the current density linearly. Thus, 200 A m−2 are achieved at three and 390 A m−2 at six corrugated layers. These current density values, which were confirmed by experiments in two independent laboratories, represent a performance increase of above one order of magnitude compared to the current state of research.

[1]  Bruce E Logan,et al.  Energy Capture from Thermolytic Solutions in Microbial Reverse-Electrodialysis Cells , 2012, Science.

[2]  U. Schröder,et al.  Effect of fiber diameter on the behavior of biofilm and anodic performance of fiber electrodes in microbial fuel cells. , 2011, Bioresource technology.

[3]  A. Carmona-Martínez,et al.  Electrospun and solution blown three-dimensional carbon fiber nonwovens for application as electrodes in microbial fuel cells , 2011 .

[4]  Uwe Schröder,et al.  Revealing the electrochemically driven selection in natural community derived microbial biofilms using flow-cytometry , 2011 .

[5]  Uwe Schröder,et al.  Electroactive mixed culture biofilms in microbial bioelectrochemical systems: the role of temperature for biofilm formation and performance. , 2010, Biosensors & bioelectronics.

[6]  K. Rabaey,et al.  Microbial electrosynthesis — revisiting the electrical route for microbial production , 2010, Nature Reviews Microbiology.

[7]  Ying Liu,et al.  The study of electrochemically active microbial biofilms on different carbon-based anode materials in microbial fuel cells. , 2010, Biosensors & bioelectronics.

[8]  Yong Zhao,et al.  Three-dimensional conductive nanowire networks for maximizing anode performance in microbial fuel cells. , 2010, Chemistry.

[9]  Bruce E. Rittmann,et al.  A kinetic perspective on extracellular electron transfer by anode-respiring bacteria. , 2010, FEMS microbiology reviews.

[10]  Bruce E. Logan,et al.  Scaling up microbial fuel cells and other bioelectrochemical systems , 2010, Applied Microbiology and Biotechnology.

[11]  Prathap Parameswaran,et al.  Selecting anode-respiring bacteria based on anode potential: phylogenetic, electrochemical, and microscopic characterization. , 2009, Environmental science & technology.

[12]  K. Xiao,et al.  A new method for water desalination using microbial desalination cells. , 2009, Environmental science & technology.

[13]  Derek R. Lovley,et al.  Cyclic voltammetry of biofilms of wild type and mutant Geobacter sulfurreducens on fuel cell anodes indicates possible roles of OmcB, OmcZ, type IV pili, and protons in extracellular electron transfer , 2009 .

[14]  Derek R. Lovley,et al.  Novel strategy for three-dimensional real-time imaging of microbial fuel cell communities: monitoring the inhibitory effects of proton accumulation within the anode biofilm , 2009 .

[15]  C. Peng,et al.  Quantum dots encapsulated with amphiphilic alginate as bioprobe for fast screening anti-dengue virus agents , 2008, Biosensors and Bioelectronics.

[16]  Bruce E Logan,et al.  Microbial electrolysis cells for high yield hydrogen gas production from organic matter. , 2008, Environmental science & technology.

[17]  C. Buisman,et al.  Towards practical implementation of bioelectrochemical wastewater treatment. , 2008, Trends in biotechnology.

[18]  Uwe Schröder,et al.  On the use of cyclic voltammetry for the study of anodic electron transfer in microbial fuel cells , 2008 .

[19]  Willy Verstraete,et al.  Minimizing losses in bio-electrochemical systems: the road to applications , 2008, Applied Microbiology and Biotechnology.

[20]  U. Schröder.  Anodic electron transfer mechanisms in microbial fuel cells and their energy efficiency. , 2007, Physical chemistry chemical physics : PCCP.

[21]  B. Logan,et al.  Graphite fiber brush anodes for increased power production in air-cathode microbial fuel cells. , 2007, Environmental science & technology.

[22]  Stefano Freguia,et al.  Microbial fuel cells: methodology and technology. , 2006, Environmental science & technology.

[23]  Derek R. Lovley,et al.  Bug juice: harvesting electricity with microorganisms , 2006, Nature Reviews Microbiology.

[24]  Uwe Schröder,et al.  Heat treated soil as convenient and versatile source of bacterial communities for microbial electricity generation , 2006 .

[25]  T. Mehta,et al.  Extracellular electron transfer via microbial nanowires , 2005, Nature.

[26]  C. Woese,et al.  Methanogens: reevaluation of a unique biological group , 1979, Microbiological reviews.