Eight-noded zig-zag element for deflection and stress analysis of plates with general lay-up

Abstract Based on the kinematics of a third-order zig-zag plate model accounting for the zero transverse shear stress conditions at upper and lower free surfaces irrespective for the lay-up, a eight-noded, 56 d.o.f. curvilinear plate element is formulated and tested. Nodal parameters are membrane displacements, transverse shear rotations, deflections, slopes and curvatures for corner nodes, membrane displacements and transverse shear rotations for mid-side nodes. Suitably defining the parameters appearing in the plate model, some higher-order plate elements, comprising previous zig-zag elements and some smeared-laminate plate elements, are obtained as particular cases. The benchmark problem is the cylindrical bending of simply-supported, symmetric and antisymmetric cross-ply plates under a sinusoidally distributed transverse loading. The body of numerical results is as follows. Closed-form solutions for the present plate model, together with the ones that can be particularized in it, are given that provide analytical comparison results. Finite element results by the present element and by the ones that are particularized in it are compared with closed-form solutions and with the exact three-dimensional elasticity solution, available for this benchmark problem. A great importance of stress-free conditions appears when plates are thick and unsymmetric. This justify development of present element accounting for unsymmetry in the lay-up. The quadratic approximation makes the present element able to accurately predict stresses by integrating local equilibrium equations. Inclusion of the layerwise kinematics of zig-zag models allows for satisfactory predictions of transverse shear stresses via constitutive equations. Use of C 2 approximation for deflections, instead of C 1 approximation required for obtaining conforming elements, appear to little improve accuracy.

[1]  J. N. Reddy,et al.  A review of refined theories of laminated composite plates , 1990 .

[2]  N. Pagano,et al.  Exact Solutions for Composite Laminates in Cylindrical Bending , 1969 .

[3]  M. Di Sciuva,et al.  A general quadrilateral multilayered plate element with continuous interlaminar stresses , 1993 .

[4]  Marco Di Sciuva.  A generalization of the zig-zag plate models to account for general lamination configuration. , 1994 .

[5]  J. Reddy,et al.  THEORIES AND COMPUTATIONAL MODELS FOR COMPOSITE LAMINATES , 1994 .

[6]  J. Reddy.  A Simple Higher-Order Theory for Laminated Composite Plates , 1984 .

[7]  K. H. Lee,et al.  Static response of unsymmetric sandwich beams using an improved zig-zag model , 1993 .

[8]  Ahmed K. Noor,et al.  Assessment of Shear Deformation Theories for Multilayered Composite Plates , 1989 .

[9]  Ugo Icardi,et al.  Analysis of thick multilayered anisotropic plates by a higher order plate element , 1995 .

[10]  N. Pagano,et al.  Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates , 1970 .

[11]  Maenghyo Cho,et al.  Finite element for composite plate bending based on efficient higher order theory , 1994 .

[12]  Marco Di Sciuva,et al.  Multilayered anisotropic plate models with continuous interlaminar stresses , 1992 .

[13]  K. H. Lee,et al.  A predictor-corrector zig-zag model for the bending of laminated composite plates , 1996 .

[14]  R. Christensen,et al.  A High-Order Theory of Plate Deformation—Part 2: Laminated Plates , 1977 .

[15]  K. H. Lee,et al.  An improved zig-zag model for the bending of laminated composite shells , 1990 .

[16]  M. Di Sciuva,et al.  An Improved Shear-Deformation Theory for Moderately Thick Multilayered Anisotropic Shells and Plates , 1987 .

[17]  Marco Di Sciuva,et al.  A third-order triangular multilayered plate finite element with continuous interlaminar stresses. , 1995 .

[18]  C. W. Bert,et al.  Research on dynamic behavior of composite and sandwich plates. IV , 1985 .

[19]  J. N. Reddy,et al.  A generalization of two-dimensional theories of laminated composite plates† , 1987 .

[20]  C. T. Sun,et al.  A three-dimensional hybrid stress isoparametric element for the analysis of laminated composite plates , 1987 .

[21]  T. K. Varadan,et al.  Refinement of higher-order laminated plate theories , 1989 .

[22]  Maenghyo Cho,et al.  Postprocess method using displacement field of higher order laminated composite plate theory , 1996 .

[23]  Hidenori Murakami,et al.  Laminated Composite Plate Theory With Improved In-Plane Responses , 1986 .

[24]  Dahsin Liu,et al.  Nonlinear analysis of composite plates using interlaminar shear stress continuity theory , 1993 .

[25]  Dahsin Liu,et al.  Interlaminar stress continuity theory for laminated composite analysis , 1991 .

[26]  Maenghyo Cho,et al.  Efficient higher order composite plate theory for general lamination configurations , 1993 .