Modeling and Solution of Signal Oscillation Mechanism of the Multi-Coil Sensor

The multi-coil sensor consisting of a series of sub-coils provides a reliable way to avoid signal distortion from excitation field. Compared with conventional coil sensors, the multi-coil sensor exhibits more complex signal conversion performance, and the conventional equivalent circuit cannot reveal the possible attenuated oscillation, which seriously degrades the detection reliability. Based on a novel equivalent circuit model, this research investigates the causes of signal oscillation and proposes and validates an effective solution, which contributes to the signal transmission characteristics of multi-coil sensors for engineering applications.

[2]  Kuniyuki Motojima,et al.  Defect Detection Method for Metal Tubes through Electromagnetic Wave Propagation Characteristics Analysis , 2017 .

[3]  Huaiqing Zhang,et al.  Transient process and optimal design of receiver coil for small‐loop transient electromagnetics , 2014 .

[4]  Chen Chen,et al.  An Optimized Air-Core Coil Sensor with a Magnetic Flux Compensation Structure Suitable to the Helicopter TEM System , 2016, Sensors.

[5]  Bo Peng,et al.  Design of Transient Electromagnetic Signal Acquisition System Based on FPGA , 2014 .

[6]  Esben Auken,et al.  Coil response inversion for very early time modelling of helicopter‐borne time‐domain electromagnetic data and mapping of near‐surface geological layers , 2014 .

[7]  Juan Herrero,et al.  Sensor-Based Assessment of Soil Salinity during the First Years of Transition from Flood to Sprinkler Irrigation , 2018, Sensors.

[8]  Long Xia,et al.  Opposing-coils transient electromagnetic method focused near-surface resolution , 2016 .

[10]  Hui Li,et al.  A Uniform Linear Multi-Coil Array-Based Borehole Transient Electromagnetic System for Non-Destructive Evaluations of Downhole Casings , 2018, Italian National Conference on Sensors.

[11]  H. Tai,et al.  On‐site calibration of air‐coil sensor for transient electromagnetic exploration , 2019, Geophysical Prospecting.

[12]  Zhang Shuang,et al.  Bucking Coil Used in Airborne Transient Electromagnetic Survey , 2012, 2012 International Conference on Industrial Control and Electronics Engineering.

[14]  L. Galagedara,et al.  Soil Moisture Mapping Using Multi-Frequency and Multi-Coil Electromagnetic Induction Sensors on Managed Podzols , 2018, Agronomy.

[15]  Huaxiang Wang,et al.  Defects detection based on sparse regularization method for electromagnetic tomography (EMT) , 2017, 2017 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

[16]  Kabir A Mamun,et al.  A Prototype of an Electromagnetic Induction Sensor for Non-Destructive Estimation of the Presence of Corrosive Chemicals Ensuing Concrete Corrosion , 2019, Sensors.

[17]  Jing Wang,et al.  Synthesis of the modeling and control systems of a tunneling accelerometer using the MatLab simulation , 2002 .

[18]  Lin Ju.  Research and development on the air-core coil sensor for mine transient electromagnetic exploration , 2016 .

[19]  Yuji Gotoh,et al.  Proposal of Thickness Measurement Method of Steel Plate With High Liftoff Using Pulsed Magnetic Field , 2017, IEEE Transactions on Magnetics.

[20]  Wang Hua.  Characteristics of damping coefficient effect on transient electromagnetic signal , 2010 .