A Bearingless Induction Motor Direct Torque Control and Suspension Force Control Based on Sliding Mode Variable Structure

Aiming at the problems of the large torque ripple and unstable suspension performance in traditional direct torque control (DTC) for a bearingless induction motor (BIM), a new method of DTC is proposed based on sliding mode variable structure (SMVS). The sliding mode switching surface of the torque and flux linkage controller are constructed by torque error and flux error, and the exponential reaching law is used to design the SMVS direct torque controller. On the basis of the radial suspension force mathematical model of the BIM, a radial suspension force closed-loop control method is proposed by utilizing the inverse system theory and SMVS. The simulation models of traditional DTC and the new DTC method based on SMVS of the BIM are set up in the MATLAB/Simulink toolbox. On this basis, the experiments are carried out. Simulation and experiment results showed that the stable suspension operation of the BIM can be achieved with small torque ripple and flux ripple. Besides, the dynamic response and suspension performance of the motor are improved by the proposed method.

[1]  Zebin Yang,et al.  Overview of Bearingless Permanent-Magnet Synchronous Motors , 2013, IEEE Transactions on Industrial Electronics.

[2]  Zebin Yang,et al.  Internal Model Control for a Bearingless Permanent Magnet Synchronous Motor Based on Inverse System Method , 2016, IEEE Transactions on Energy Conversion.

[3]  Zebin Yang,et al.  High-Performance Control for a Bearingless Permanent-Magnet Synchronous Motor Using Neural Network Inverse Scheme Plus Internal Model Controllers , 2016, IEEE Transactions on Industrial Electronics.

[4]  Neil Genzlinger.  A. and Q , 2006 .

[5]  Zebin Yang,et al.  Speed-Sensorless Vector Control of a Bearingless Induction Motor With Artificial Neural Network Inverse Speed Observer , 2013, IEEE/ASME Transactions on Mechatronics.

[6]  Wang Xiao-lin.  Direct Torque Control of Bearingless Induction Motor , 2008 .

[7]  Frede Blaabjerg,et al.  Super-twisting sliding mode direct torque contol of induction machine drives , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[9]  Bao-Zhu Guo,et al.  Sliding Mode and Active Disturbance Rejection Control to Stabilization of One-Dimensional Anti-Stable Wave Equations Subject to Disturbance in Boundary Input , 2012, IEEE Transactions on Automatic Control.

[10]  Zebin Yang,et al.  Precise control of a four degree-of-freedom permanent magnet biased active magnetic bearing system in a magnetically suspended direct-driven spindle using neural network inverse scheme , 2017 .

[11]  Hui Li,et al.  Bearingless motor's radial suspension force control based on virtual winding current analysis , 2014, 2014 17th International Conference on Electrical Machines and Systems (ICEMS).

[12]  Zhengrong Xiang,et al.  Direct torque control of PMSM based on fractional order sliding mode variable structure and space vector pulse width modulation , 2014, CCC 2014.

[13]  Zebin Yang,et al.  Sliding Mode Control for Bearingless Induction Motor Based on a Novel Load Torque Observer , 2016, J. Sensors.

[14]  Jun-Jun Liu,et al.  Boundary stabilization of a cascade of ODE‐wave systems subject to boundary control matched disturbance , 2017 .

[15]  Aimeng Wang,et al.  A New Exponential Reaching Law of Sliding Mode Control to Improve Performance of Permanent Magnet Synchronous Motor , 2013, IEEE Transactions on Magnetics.

[16]  Yang Ze-bin.  SVM-DTC System for Bearingless Induction Motor Based on Discrete Time Deadbeat , 2012 .

[17]  Xiaodong Sun,et al.  Rotor Mass Eccentricity Vibration Compensation Control in Bearingless Induction Motor , 2015 .

[18]  Yu Xin Sun,et al.  A Three-Level DTC System Based on Virtual Space Vector Modulation for Bearingless Permanent Magnet Synchronous Motor , 2014 .