In-line mixing technologies used in paper and pulp manufacturing have been studied long and broadly by XAMK Fiberlaboratory in Savonlinna, Finland. Especially, wider introduction and diversification of technologies related to mixing of paper chemicals have created a need to determined research of the in-line mixing technologies. In Finnish research project FLASH, a ground was based for researching and developing the fast in-line mixing techniques together with companies operating in pulp and paper industry segment. Application potential, basic knowledge, measurement technologies, experiment techniques, and research facilities were surveyed for utilizing them later in practical processes. One of the tested measurement technologies was high-speed infrared imaging. The high-speed infrared imaging tests were carried out together by VTT, XAMK and the companies in Fiberlaboratory research facility in 2013-2015. The Fiberlaboratory research facility includes medium-consistency pulp (MC) chemical mixing equipment, which is almost equal to real life paper mill chemical mixing environment. The infrared imaging was done with the help of IR transmitting sapphire window attached to suitable point in mixing tube system. Temperature differences of main flow and mixing flow enabled analyzing and calculating mixing indexes for different mixing drive parameters successfully. VTT has also designed a new kind of infrared omnilens for example for panoramic streetview thermography. The VTT omnilens technology enables the streetview thermography with a single infrared camera. Horizontal 360 degree infrared image is achieved by novel lens solution and also vertical image portion is possible. The streetview thermography is useful when finding thermal leaks from buildings in wide area or it can be used to find thermal leaks inside buildings with wheeled small vehicles. Also, utilizing the omnilens in drones to prevent them to collide each other or other drone applications are possible in the future.
[1]
Sami Siikanen,et al.
Building thermography and energy performance directive of buildings
,
2012,
Defense, Security, and Sensing.
[2]
Mika Aikio,et al.
Biaxial Tripod MEMS Mirror and Omnidirectional Lens for a Low Cost Wide Angle Laser Range Sensor
,
2012
.
[3]
Timo Kauppinen,et al.
Building thermography: reporting and interpretation of results
,
2016,
SPIE Commercial + Scientific Sensing and Imaging.
[4]
Davide Scaramuzza,et al.
Omnidirectional Camera
,
2014,
Computer Vision, A Reference Guide.
[5]
Pasi Miikkulainen,et al.
In-line particle measurement in a recovery boiler using high-speed infrared imaging
,
2012,
Defense, Security, and Sensing.
[6]
Sami Siikanen,et al.
Improvement of energy efficiency: the use of thermography and air-tightness test in verification of thermal performance of school buildings
,
2011,
Defense + Commercial Sensing.