Fracture of Concrete Subjected to Impact Loading

To evaluate the response of concrete structures subjected to impact or impulsive loading, it is essential to know how cracks propagate under such dynamic loading conditions. Single-edge notched beams were subjected to varying rates of loading to establish the stress intensity factor K1 versus crack velocity V relationship for mortar and concrete. Impact tests were performed using a modified instrumented Charpy test system. During loading, the rate of crack growth was obtained using special brittle Krak gages. Results indicate the following: (1) For a given strain rate the extent of pre-peak crack growth is larger for concrete than for mortar, and the amount of pre-peak crack growth decreases with increase in strain-rate. (2) Decrease in pre-peak nonlinearity at higher strain rates is probably caused by the decrease in amount of slow (pre-peak) crack growth. Hence, the linear-elastic fracture mechanics (LEFM) approach at high rates may be valid. (3) To obtain realistic size independent value of stress intensity factor, slow crack growth should be included in the calculation for cement composites. (4) The relationship between log K1 and log V is nonlinear especially at the higher rates of loading, for both mortar and concrete.

[1]  R. J. Charles,et al.  Dynamic Fatigue of Glass , 1958 .

[2]  R. J. Charles,et al.  Static Fatigue of Glass. II , 1958 .

[3]  Anand Kumar,et al.  The effect of stress rate and temperature on the strength of basalt and granite , 1968 .

[4]  S. Mindess,et al.  Slow Crack Growth in Cement Paste , 1974 .

[5]  Anthony G. Evans,et al.  Application of Fracture Mechanics to Space‐Shuttle Windows , 1974 .

[6]  Anthony G. Evans,et al.  Slow crack growth in brittle materials under dynamic loading conditions , 1974 .

[7]  J. Bhargava,et al.  HIGH-SPEED PHOTOGRAPHY FOR FRACTURE STUDIES OF CONCRETE , 1975 .

[8]  A. Evans,et al.  The fracture mechanics of mortars , 1976 .

[9]  S. Burns,et al.  Thermally activated crack propagation — theory , 1977 .

[10]  H. Kolsky,et al.  The interaction between bending fractures and the emitted stress waves , 1977 .

[11]  D. François,et al.  Mecanique de la rupture appliquee au beton hydraulique , 1979 .

[12]  Surendra P. Shah,et al.  Double torsion tests for studying slow crack growth of portland cement mortar , 1980 .

[13]  Surendra P. Shah,et al.  Fracture behavior and analysis of fiber reinforced concrete beams , 1980 .

[14]  P. Petersson.  Crack growth and development of fracture zones in plain concrete and similar materials , 1981 .

[15]  Surendra P. Shah,et al.  Inertial Effects in the Instrumented Impact Testing of Cementitious Composites , 1981 .

[16]  B. Mayfield,et al.  Detecting the progress of internal cracks in concrete by using embedded graphite rods , 1981 .

[17]  A. Emery,et al.  Dynamic Fracture Toughnesses of Reaction‐Bonded Silicon Nitride , 1983 .

[18]  Henning-H. Kausch,et al.  A simple velocity gauge for measuring crack growth , 1983 .

[19]  Surendra P. Shah,et al.  Rate-sensitive damage theory for brittle solids , 1984 .

[20]  Surendra P. Shah,et al.  A Fracture toughness criterion for concrete , 1985 .

[21]  Surendra P. Shah,et al.  Constitutive Model for Dynamic Loading of Concrete , 1985 .