Computational study of desalination by reverse osmosis — Three-dimensional analyses

Abstract A computational study has been conducted to examine three-dimensional steady multicomponent fluid flows in the reverse osmosis membrane module. The module contains a net of spacers. The SST k - ω turbulence model is employed to simulate flow and concentration fields at Re  = 400 and 800, while the laminar model is employed to characterize flow and concentration fields at Re  = 100. Spacer grids with 30°, 45° and 60° are considered as three different geometries. The membrane is treated as a functional surface where water flux, concentration and local pressure are coupled. The nature of concentration polarization in each membrane module is determined. Characteristics of potential fouling buildup are determined from the wall shear stress distribution. Correlations between potential fouling regions and the concentration distribution are presented. The coefficient of performance for each membrane module is determined at all flow rates considered. It has been illustrated that all membrane modules perform better at higher flow rates. The membrane module containing the net of spacers in the 30° arrangement is shown to be the most efficient membrane module. This study proves that the configuration of spacers is an important optimization parameter for the design of reverse osmosis membrane modules.

[1]  M. V. van Loosdrecht,et al.  Spacer geometry and particle deposition in spiral wound membrane feed channels. , 2014, Water research.

[2]  C. P. Koutsou,et al.  A novel retentate spacer geometry for improved spiral wound membrane (SWM) module performance , 2015 .

[3]  F. Menter Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[4]  Smith Eiamsa-ard,et al.  Numerical investigation of turbulent heat transfer in channels with detached rib‐arrays , 2011 .

[5]  D. Grigoriadis,et al.  Three dimensional flow around a circular cylinder confined in a plane channel , 2011 .

[6]  H. Matsuyama,et al.  Numerical Modeling of Concentration Polarization in Spacer-filled Channel with Permeation across Reverse Osmosis Membrane , 2015 .

[7]  Shyam S. Sablani,et al.  Concentration polarization in ultrafiltration and reverse osmosis: a critical review , 2001 .

[8]  Ali E. Anqi,et al.  Steady three dimensional flow and mass transfer analyses for brackish water desalination by reverse osmosis membranes , 2016 .

[9]  M. Thompson,et al.  Vortex shedding and three-dimensional behaviour of flow past a cylinder confined in a channel , 2011 .

[10]  R. Chhabra,et al.  Wall effects in flow past a circular cylinder in a plane channel: a numerical study , 2004 .

[11]  Ahmad Fauzi Ismail,et al.  A review on RO membrane technology: Developments and challenges , 2015 .

[12]  Young-Nam Kwon,et al.  Effect of feed spacer thickness on the fouling behavior in reverse osmosis process — A pilot scale study , 2016 .

[13]  Ali E. Anqi,et al.  Computational study of gas separation using a hollow fiber membrane , 2015 .

[14]  Ali E. Anqi,et al.  Numerical study of gas separation using a membrane , 2015 .

[15]  Dianne E. Wiley,et al.  Numerical study of mass transfer in three-dimensional spacer-filled narrow channels with steady flow , 2007 .

[16]  Lianfa Song,et al.  Numerical study on permeate flux enhancement by spacers in a crossflow reverse osmosis channel , 2006 .

[17]  T. Arnot,et al.  A review of reverse osmosis membrane materials for desalinationDevelopment to date and future poten , 2011 .

[18]  J. G. Wijmans,et al.  The solution-diffusion model: a review , 1995 .

[19]  S. G. Yiantsios,et al.  Direct numerical simulation of flow in spacer-filled channels: Effect of spacer geometrical characteristics , 2007 .

[20]  Sandeep K. Karode,et al.  Flow visualization through spacer filled channels by computational fluid dynamics I. , 2001 .

[21]  J Schwinge,et al.  Characterization of a zigzag spacer for ultrafiltration , 2000 .

[22]  Ali E. Anqi,et al.  Numerical simulation of brackish water desalination by a reverse osmosis membrane , 2015 .

[23]  S. C. Solanki,et al.  Analysis of heat transfer augmentation and flow characteristics due to rib roughness over absorber plate of a solar air heater , 2006 .

[24]  George M. Ayoub,et al.  Reverse osmosis technology for water treatment: State of the art review , 2011 .

[25]  S. B. Nasrallah,et al.  Experimental investigation of a confined flow downstream of a circular cylinder centred between two parallel walls , 2008 .