Tracking Accuracy Improvement Based on Adaptive Nonlinear Sliding Mode Control

[1]  Bin Yao,et al.  $\mu$-Synthesis-Based Adaptive Robust Control of Linear Motor Driven Stages With High-Frequency Dynamics: A Case Study , 2015, IEEE/ASME Transactions on Mechatronics.

[2]  Faa-Jeng Lin,et al.  Adaptive fuzzy sliding-mode control for PM synchronous servo motor drives , 1998 .

[3]  Bin Yao,et al.  Desired Compensation Adaptive Robust Control of a Linear-Motor-Driven Precision Industrial Gantry With Improved Cogging Force Compensation , 2008, IEEE/ASME Transactions on Mechatronics.

[4]  Hugh F. Durrant-Whyte,et al.  Fuzzy sliding-mode controllers with applications , 2001, IEEE Trans. Ind. Electron..

[5]  Theodorus J.A. de Vries,et al.  Linear motor motion control using a learning feedworward controller , 1997 .

[6]  Mi-Ching Tsai,et al.  Real-time NURBS command generators for CNC servo controllers , 2002 .

[7]  Jin-Hua She,et al.  A Discrete-Time Terminal Sliding-Mode Control Approach Applied to a Motion Control Problem , 2009, IEEE Transactions on Industrial Electronics.

[8]  Kun Yung Chen,et al.  Sliding Mode Minimum-Energy Control for a Mechatronic Motor-Table System , 2016, IEEE/ASME Transactions on Mechatronics.

[9]  Ioannis Kanellakopoulos,et al.  Adaptive nonlinear friction compensation with parametric uncertainties , 1999, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).

[10]  A. Zinober,et al.  Continuous approximation of variable structure control , 1986 .

[11]  Weiping Li,et al.  Applied Nonlinear Control , 1991 .

[12]  Zhihong Man,et al.  Non-singular terminal sliding mode control of rigid manipulators , 2002, Autom..

[13]  John Y. Hung,et al.  Variable structure control: a survey , 1993, IEEE Trans. Ind. Electron..

[14]  Li Xu,et al.  Adaptive robust control of mechanical systems with nonlinear dynamic friction compensation , 2000, Proceedings of the 2000 American Control Conference. ACC (IEEE Cat. No.00CH36334).

[15]  Jean-Jacques E. Slotine,et al.  Tracking control of nonlinear systems using sliding surfaces , 1983 .

[16]  Rael Schmulian.  Reduction of cogging forces in a double sided tubular linear permanent magnet generator used for ocean wave energy conversion , 2013 .

[17]  L. Ljung,et al.  Adaptive Control Design and Analysis ( , 2014 .

[18]  Yanan Li,et al.  Reference Trajectory Modification Based on Spatial Iterative Learning for Contour Control of Two-Axis NC Systems , 2020, IEEE/ASME Transactions on Mechatronics.

[19]  Zhihong Man,et al.  Robust Motion Control of a Linear Motor Positioner Using Fast Nonsingular Terminal Sliding Mode , 2015, IEEE/ASME Transactions on Mechatronics.

[20]  Chin-Ming Hong,et al.  Design of a static reactive power compensator using fuzzy sliding mode control , 1994, Proceedings of 1994 33rd IEEE Conference on Decision and Control.

[21]  Ming-Yang Cheng,et al.  Motion Controller Design for Contour-Following Tasks Based on Real-Time Contour Error Estimation , 2007, IEEE Transactions on Industrial Electronics.

[22]  A. Levant,et al.  Guidance and Control of Missile Interceptor using Second-Order Sliding Modes , 2009, IEEE Transactions on Aerospace and Electronic Systems.

[23]  Vadim I. Utkin,et al.  Sliding mode control design principles and applications to electric drives , 1993, IEEE Trans. Ind. Electron..

[24]  Ilyas Eker,et al.  Second-order sliding mode control with experimental application. , 2010, ISA transactions.

[25]  Deug-Woo Lee,et al.  Various design techniques to reduce cogging torque by controlling energy variation in permanent magnet motors , 2001 .

[26]  Leonid M. Fridman,et al.  Second-order sliding-mode observer for mechanical systems , 2005, IEEE Transactions on Automatic Control.

[27]  D. Howe,et al.  Reduction of cogging force in slotless linear permanent magnet motors , 1997 .

[28]  Ming-Yang Cheng,et al.  Real time parameter based contour error estimation algorithms for free form contour following , 2016 .

[29]  Carlos Canudas de Wit,et al.  A new model for control of systems with friction , 1995, IEEE Trans. Autom. Control..

[30]  B.W. Williams,et al.  Torque ripple reduction in switched reluctance motor drives using B-spline neural networks , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[31]  A. Levant.  Sliding order and sliding accuracy in sliding mode control , 1993 .

[32]  Les A. Piegl,et al.  On NURBS: A Survey , 2004 .

[33]  Min-Shin Chen,et al.  Chattering reduction of sliding mode control by low‐pass filtering the control signal , 2010 .

[34]  Zhihong Man,et al.  Continuous finite-time control for robotic manipulators with terminal sliding mode , 2003, Autom..

[35]  R. Palm,et al.  Sliding mode fuzzy control , 1992, [1992 Proceedings] IEEE International Conference on Fuzzy Systems.

[36]  Yew-Wen Liang,et al.  Study of Nonlinear Integral Sliding Mode Fault-Tolerant Control , 2016, IEEE/ASME Transactions on Mechatronics.

[37]  V. Utkin.  Variable structure systems with sliding modes , 1977 .

[38]  Ming-Yang Cheng,et al.  Velocity Field Construction for Contour Following Tasks Represented in NURBS Form , 2009, IEEE Transactions on Automatic Control.

[39]  Ali Keyhani,et al.  Study of cogging torque in permanent magnet machines , 1997 .

[40]  Ming-Yang Cheng,et al.  Contouring accuracy improvement using cross-coupled control and position error compensator , 2008 .

[41]  Bin Yao,et al.  Adaptive Robust Precision Motion Control of a High-Speed Industrial Gantry With Cogging Force Compensations , 2011, IEEE Transactions on Control Systems Technology.

[42]  Nicola Bianchi,et al.  Design techniques for reducing the cogging torque in surface-mounted PM motors , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[43]  Bin Yao,et al.  Integrated Coordinated/Synchronized Contouring Control of a Dual-Linear-Motor-Driven Gantry , 2020, IEEE Transactions on Industrial Electronics.

[44]  Rey-Chue Hwang,et al.  A self-tuning PID control for a class of nonlinear systems based on the Lyapunov approach , 2002 .