论文信息 - Low loss two-port lumped element isolator using improved gyrator circuit

Low loss two-port lumped element isolator using improved gyrator circuit

Design equations for a new low loss two-port isolator are derived by analyzing the conventional two-port isolator and improved gyrator circuit. The isolator performance is simulated using the admittance matrix; the result provides an insertion loss, 0.25dB less at 1920MHz to 1980MHz, compared to conventional two-port isolator. Using these design equations, a 3.2X3.2X1.5mm 3 cellular phone isolator which insertion loss is 0.36dBmax. at 1920MHz to 1980 MHz, is realized.

Takashi Hasegawa | Takekazu Okada | Toshihiro Makino | Seigo Hino | Katsuyuki Ohira

[1] Y. Konishi. Lumped Element Y Circulator , 1965 .

[2] R. H. Knerr. A Proposed Lumped-Element Switching Circulator Principle , 1972 .

[3] K. Ichikawa,et al. Improved lumped-element two-port isolator , 2003, IEEE MTT-S International Microwave Symposium Digest, 2003.

[4] T. Okada,et al. An ultra miniature isolator with broadband isolation using ferrite gyrator , 2001, 2001 IEEE MTT-S International Microwave Sympsoium Digest (Cat. No.01CH37157).