Modeling the Universal Set/Reset Characteristics of Bipolar RRAM by Field- and Temperature-Driven Filament Growth

Resistive switching memory (RRAM) devices generally rely on the formation/dissolution of conductive filaments through insulating materials, such as metal oxides and chalcogenide glasses. Understanding the mechanisms for filament formation and disruption in resistive switching materials is a critical step toward the development of reliable and controllable RRAM for future-generation storage. In particular, the capability to control the filament resistance and the reset current through the compliance current during filament formation may provide a key signature to clarify the switching mechanism. This paper provides a physically based explanation for the universal resistance switching in bipolar RRAM devices. A numerical model of filament growth based on thermally activated ion migration accounts for the resistance switching characteristics. The same physical picture is extended to numerically model the reset transition. The impact of migration parameters and experimental setup on the set/reset characteristics is discussed through numerical simulations.

[1]  A. Pirovano,et al.  Parasitic reset in the programming transient of PCMs , 2005, IEEE Electron Device Letters.

[2]  R. Waser,et al.  Oxygen vacancy migration and time-dependent leakage current behavior of Ba0.3Sr0.7TiO3 thin films , 2005 .

[3]  R. Waser,et al.  Coexistence of Bipolar and Unipolar Resistive Switching Behaviors in a Pt ∕ TiO2 ∕ Pt Stack , 2007 .

[4]  R. Waser,et al.  Resistive switching in Ag-Ge-Se with extremely low write currents , 2007, 2007 Non-Volatile Memory Technology Symposium.

[5]  R. Waser,et al.  Nanoionics-based resistive switching memories. , 2007, Nature materials.

[6]  Sunae Seo,et al.  Observation of electric-field induced Ni filament channels in polycrystalline NiOx film , 2007 .

[7]  K. Tsunoda,et al.  Low Power and High Speed Switching of Ti-doped NiO ReRAM under the Unipolar Voltage Source of less than 3 V , 2007, 2007 IEEE International Electron Devices Meeting.

[8]  B. Delley,et al.  Role of Oxygen Vacancies in Cr‐Doped SrTiO3 for Resistance‐Change Memory , 2007, 0707.0563.

[9]  I. Yoo,et al.  2-stack 1D-1R Cross-point Structure with Oxide Diodes as Switch Elements for High Density Resistance RAM Applications , 2007, 2007 IEEE International Electron Devices Meeting.

[10]  A. Sawa.  Resistive switching in transition metal oxides , 2008 .

[11]  K. Tsunoda,et al.  Reduction in the reset current in a resistive random access memory consisting of NiOx brought about by reducing a parasitic capacitance , 2008 .

[12]  H. Hwang,et al.  Uniform resistive switching with a thin reactive metal interface layer in metal-La0.7Ca0.3MnO3-metal heterostructures , 2008 .

[13]  R. Meyer,et al.  Oxide dual-layer memory element for scalable non-volatile cross-point memory technology , 2008, 2008 9th Annual Non-Volatile Memory Technology Symposium (NVMTS).

[14]  I. Baek,et al.  Write Current Reduction in Transition Metal Oxide Based Resistance Change Memory , 2008 .

[15]  Frederick T. Chen,et al.  Low power and high speed bipolar switching with a thin reactive Ti buffer layer in robust HfO2 based RRAM , 2008, 2008 IEEE International Electron Devices Meeting.

[16]  D. Ielmini,et al.  Study of Multilevel Programming in Programmable Metallization Cell (PMC) Memory , 2009, IEEE Transactions on Electron Devices.

[17]  D. Ielmini,et al.  Filament Conduction and Reset Mechanism in NiO-Based Resistive-Switching Memory (RRAM) Devices , 2009, IEEE Transactions on Electron Devices.

[18]  R. Waser,et al.  Resistive switching in electrochemical metallization memory cells , 2009 .

[19]  Xin Peng Wang,et al.  Optimized Ni Oxidation in 80-nm Contact Holes for Integration of Forming-Free and Low-Power Ni/NiO/Ni Memory Cells , 2009, IEEE Transactions on Electron Devices.

[20]  R. Dittmann,et al.  Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges , 2009, Advanced materials.

[21]  D. Ielmini,et al.  Modeling of Set/Reset Operations in NiO-Based Resistive-Switching Memory Devices , 2009, IEEE Transactions on Electron Devices.

[22]  D. Ielmini,et al.  Voltage-Driven On–Off Transition and Tradeoff With Program and Erase Current in Programmable Metallization Cell (PMC) Memory , 2009, IEEE Electron Device Letters.

[23]  D. Ielmini,et al.  Resistance transition in metal oxides induced by electronic threshold switching , 2009 .

[24]  J. Yang,et al.  Direct Identification of the Conducting Channels in a Functioning Memristive Device , 2010, Advanced materials.

[25]  Stephan Menzel,et al.  Memory Devices: Energy–Space–Time Tradeoffs , 2010, Proceedings of the IEEE.

[26]  Hyunsang Hwang,et al.  Diode-less nano-scale ZrOx/HfOx RRAM device with excellent switching uniformity and reliability for high-density cross-point memory applications , 2010, 2010 International Electron Devices Meeting.

[27]  Jae Hyuck Jang,et al.  Atomic structure of conducting nanofilaments in TiO2 resistive switching memory. , 2010, Nature nanotechnology.

[28]  D. Ielmini,et al.  Size-Dependent Retention Time in NiO-Based Resistive-Switching Memories , 2010, IEEE Electron Device Letters.

[29]  L. Goux,et al.  Coexistence of the bipolar and unipolar resistive-switching modes in NiO cells made by thermal oxidation of Ni layers , 2010 .

[30]  Hyunsang Hwang,et al.  Investigation of State Stability of Low-Resistance State in Resistive Memory , 2010, IEEE Electron Device Letters.

[31]  Masakazu Aono,et al.  The Atomic Switch , 2010, Proceedings of the IEEE.

[32]  K. Yong,et al.  Coexistence of unipolar and bipolar resistive switching characteristics in ZnO thin films , 2010 .

[33]  D. Ielmini,et al.  Resistance-dependent amplitude of random telegraph-signal noise in resistive switching memories , 2010 .

[34]  Seong-Geon Park,et al.  Impact of Oxygen Vacancy Ordering on the Formation of a Conductive Filament in $\hbox{TiO}_{2}$ for Resistive Switching Memory , 2011, IEEE Electron Device Letters.

[35]  C. Muller,et al.  Self-consistent physical modeling of set/reset operations in unipolar resistive-switching memories , 2011 .

[36]  R. Waser,et al.  Thermochemical resistive switching: materials, mechanisms, and scaling projections , 2011 .

[37]  D. Ielmini,et al.  Universal Reset Characteristics of Unipolar and Bipolar Metal-Oxide RRAM , 2011, IEEE Transactions on Electron Devices.

[38]  Shimeng Yu,et al.  Compact Modeling of Conducting-Bridge Random-Access Memory (CBRAM) , 2011, IEEE Transactions on Electron Devices.

[39]  Daniele Ielmini,et al.  Control of filament size and reduction of reset current below 10 μA in NiO resistance switching memories , 2011 .

[40]  G. Reimbold,et al.  Accurate analysis of parasitic current overshoot during forming operation in RRAMs , 2011 .

[41]  Daniele Ielmini,et al.  Filament diffusion model for simulating reset and retention processes in RRAM , 2011 .

[42]  Hyunsang Hwang,et al.  Resistive switching characteristics of ultra-thin TiOx , 2011 .

[43]  D. Gilmer,et al.  Effects of RRAM Stack Configuration on Forming Voltage and Current Overshoot , 2011, 2011 3rd IEEE International Memory Workshop (IMW).

[44]  D. Ielmini,et al.  Physical models of size-dependent nanofilament formation and rupture in NiO resistive switching memories , 2011, Nanotechnology.