Enhancing Crystallization in Hybrid Perovskite Solar Cells Using Thermally Conductive 2D Boron Nitride Nanosheet Additive.

Controlling crystallization and grain growth is crucial for realizing highly efficient hybrid perovskite solar cells (PSCs). In this work, enhanced PSC photovoltaic performance and stability by accelerating perovskite crystallization and grain growth via 2D hexagonal boron nitride (hBN) nanosheet additives incorporated into the active perovskite layer are demonstrated. In situ X-ray scattering and infrared thermal imaging during the perovskite annealing process revealed the highly thermally conductive hBN nanosheets promoted the phase conversion and grain growth in the perovskite layer by facilitating a more rapid and spatially uniform temperature rise within the perovskite film. Complementary structural, physicochemical, and electrical characterizations further showed that the hBN nanosheets formed a physical barrier at the perovskite grain boundaries and the interfaces with charge transport layers, passivating defects, and retarding ion migration. As a result, the power conversion efficiency of the PSC is improved from 17.4% to 19.8%, along with enhanced device stability, retaining ≈90% of the initial efficiency even after 500 h ambient air storage. The results not only highlight 2D hBN as an effective additive for PSCs but also suggest enhanced thermal transport as one of the pathways for improved PSC performance by 2D material additives in general.

[1]  Qi Chen,et al.  Improving Heat Transfer Enables Durable Perovskite Solar Cells , 2022, Advanced Energy Materials.

[2]  M. Rafailovich,et al.  Effects of polymer grain boundary passivation on organic–inorganic hybrid perovskite field-effect transistors , 2021, Applied Physics Letters.

[3]  Kwang Soo Kim,et al.  Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes , 2021, Nature.

[4]  Tai-De Li,et al.  Improving Thermal Stability of Perovskite Solar Cells by Suppressing Ion Migration Using Copolymer Grain Encapsulation , 2021, Chemistry of Materials.

[5]  R. S. Mulik,et al.  Precursors controlled morphologies of nanocrystalline h-BN and its growth mechanism , 2021 .

[6]  Jiawei Yan,et al.  Stability of Perovskite Thin Films under Working Condition: Bias‐Dependent Degradation and Grain Boundary Effects , 2021, Advanced Functional Materials.

[7]  Yu-Hao Deng,et al.  Analysis of misidentifications in TEM characterisation of organic‐inorganic hybrid perovskite material , 2021, Journal of microscopy.

[8]  M. Toney,et al.  Crystallization in one-step solution deposition of perovskite films: Upward or downward? , 2021, Science Advances.

[9]  T. Kelly,et al.  In situ studies of the degradation mechanisms of perovskite solar cells , 2020 .

[10]  Tai-De Li,et al.  Enhancing Chemical Stability and Suppressing Ion Migration in CH3NH3PbI3 Perovskite Solar Cells via Direct Backbone Attachment of Polyesters on Grain Boundaries , 2020, Chemistry of Materials.

[11]  Xingyu Gao,et al.  Ultrathin Nanosheets of Oxo‐functionalized Graphene Inhibit the Ion Migration in Perovskite Solar Cells , 2019, Advanced Energy Materials.

[12]  Feng Yan,et al.  Two-dimensional materials in perovskite solar cells , 2019, Materials Today Energy.

[13]  Michael Saliba,et al.  Efficient and Stable Inorganic Perovskite Solar Cells Manufactured by Pulsed Flash Infrared Annealing , 2018, Advanced Energy Materials.

[14]  Jayan Thomas,et al.  The Role of Graphene and Other 2D Materials in Solar Photovoltaics , 2018, Advanced materials.

[15]  Yingjie Yu,et al.  Roles of Interfacial Tension in Regulating Internal Organization of Low Bandgap Polymer Bulk Heterojunction Solar Cells by Polymer Additives , 2018, Advanced Materials Interfaces.

[16]  Jian-Dong Zhang,et al.  Precisely Controlling the Grain Sizes with an Ammonium Hypophosphite Additive for High‐Performance Perovskite Solar Cells , 2018, Advanced Functional Materials.

[17]  Hongxing Jiang,et al.  Origin and roles of oxygen impurities in hexagonal boron nitride epilayers , 2018 .

[18]  J. Coleman,et al.  Spectroscopic Size and Thickness Metrics for Liquid-Exfoliated h-BN , 2018, 1803.02240.

[19]  Nan Meng,et al.  Liquid‐Phase Exfoliation of Hexagonal Boron Nitride into Boron Nitride Nanosheets in Common Organic Solvents with Hyperbranched Polyethylene as Stabilizer , 2018 .

[20]  M. Green,et al.  Humidity‐Induced Degradation via Grain Boundaries of HC(NH2)2PbI3 Planar Perovskite Solar Cells , 2018 .

[21]  He Sun,et al.  High-Efficient Liquid Exfoliation of Boron Nitride Nanosheets Using Aqueous Solution of Alkanolamine , 2017, Nanoscale Research Letters.

[22]  G. Cui,et al.  Simultaneous Evolution of Uniaxially Oriented Grains and Ultralow-Density Grain-Boundary Network in CH3NH3PbI3 Perovskite Thin Films Mediated by Precursor Phase Metastability , 2017 .

[23]  Sumei Huang,et al.  Constructing Efficient and Stable Perovskite Solar Cells via Interconnecting Perovskite Grains. , 2017, ACS applied materials & interfaces.

[24]  Yang Yang,et al.  A Bifunctional Lewis Base Additive for Microscopic Homogeneity in Perovskite Solar Cells , 2017 .

[25]  F. Ren,et al.  Low-cost synthesis, fluorescent properties, growth mechanism and structure of CH3NH3PbI3 with millimeter grains , 2017 .

[26]  Dong Suk Kim,et al.  High-Temperature-Short-Time Annealing Process for High-Performance Large-Area Perovskite Solar Cells. , 2017, ACS nano.

[27]  S. Haque,et al.  Fast oxygen diffusion and iodide defects mediate oxygen-induced degradation of perovskite solar cells , 2017, Nature Communications.

[28]  Tejas S. Sherkar,et al.  Recombination in Perovskite Solar Cells: Significance of Grain Boundaries, Interface Traps, and Defect Ions , 2017, ACS energy letters.

[29]  Sumei Huang,et al.  Efficient and Air-Stable Planar Perovskite Solar Cells Formed on Graphene-Oxide-Modified PEDOT:PSS Hole Transport Layer , 2017, Nano-Micro Letters.

[30]  Kyungjin Cho,et al.  UV Degradation and Recovery of Perovskite Solar Cells , 2016, Scientific Reports.

[31]  S. Zakeeruddin,et al.  Enhancing Efficiency of Perovskite Solar Cells via N‐doped Graphene: Crystal Modification and Surface Passivation , 2016, Advanced materials.

[32]  W. Su,et al.  Formation Mechanism and Control of Perovskite Films from Solution to Crystalline Phase Studied by in Situ Synchrotron Scattering. , 2016, ACS applied materials & interfaces.

[33]  David S. Ginger,et al.  Photoluminescence Lifetimes Exceeding 8 μs and Quantum Yields Exceeding 30% in Hybrid Perovskite Thin Films by Ligand Passivation , 2016 .

[34]  A. Di Carlo,et al.  In situ observation of heat-induced degradation of perovskite solar cells , 2016, Nature Energy.

[35]  Kun Fu,et al.  A Thermally Conductive Separator for Stable Li Metal Anodes. , 2015, Nano letters.

[36]  H. Yang,et al.  Thermal-Induced Volmer–Weber Growth Behavior for Planar Heterojunction Perovskites Solar Cells , 2015 .

[37]  D. Ginger,et al.  Impact of microstructure on local carrier lifetime in perovskite solar cells , 2015, Science.

[38]  Sergei Tretiak,et al.  High-efficiency solution-processed perovskite solar cells with millimeter-scale grains , 2015, Science.

[39]  Jinsong Huang,et al.  Solvent Annealing of Perovskite‐Induced Crystal Growth for Photovoltaic‐Device Efficiency Enhancement , 2014, Advanced materials.

[40]  F. Giustino,et al.  Steric engineering of metal-halide perovskites with tunable optical band gaps , 2014, Nature Communications.

[41]  Tingting Shi,et al.  Unique Properties of Halide Perovskites as Possible Origins of the Superior Solar Cell Performance , 2014, Advanced materials.

[42]  Yanfa Yan,et al.  Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber , 2014 .

[43]  Laura M Herz,et al.  High Charge Carrier Mobilities and Lifetimes in Organolead Trihalide Perovskites , 2013, Advanced materials.

[44]  N. Park,et al.  Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9% , 2012, Scientific Reports.

[45]  Dmitri Golberg,et al.  Boron nitride nanotubes and nanosheets. , 2010, ACS nano.