In-situ construction method for lunar habitation: Chinese Super Mason

Abstract Lunar exploration has become increasingly popular, and lunar habitation research must be a core focus during the exploration of the Moon. The lunar habitation research must mainly include architectural and structural designs built using suitable material-forming technology and construction equipment. To address these issues, Chinese Super Mason (CSM) was proposed. This technology is an autonomous robotic construction system that is capable of automated assembling on-site prefabricated multistructural bricks and arched segments. The compound fabrication system was composed of a six-axis robotic manipulator and a dry mixed autoclaving fabricator carried on an autonomous-limbed vehicle platform. The Xuanwu Station for the lunar habitation conceptual design was developed and intended for erection by the CSM. A case study was conducted in a 2.8 m-long, 0.8 m-wide, and 1.1 m-high open arched-formwork structure fabricated within 8.5 h on the Earth. In addition, the Xuanwu Station was evaluated using finite element analysis software considering the temperature, air pressure, and other special environments on the Moon. The reliabilities and limitations of the CSM method were analyzed. Finally, the applications of the CSM in the extreme environment of the Earth and several improvements of the experimental equipment were discussed along with the proposed future applications for autonomous construction.

[1]  Martin Bechthold,et al.  Robotic tile placement: Tools, techniques and feasibility , 2014 .

[2]  Ramesh B. Malla,et al.  Determination of temperature variation on lunar surface and subsurface for habitat analysis and design , 2015 .

[3]  M. Sperl,et al.  Influence of Mineral Composition on Sintering Lunar Regolith , 2017 .

[4]  Yosio Nakamura,et al.  Farside deep moonquakes and deep interior of the Moon , 2005 .

[5]  Juan Pavón,et al.  Material use optimization in 3D printing through a physical simulation algorithm , 2017 .

[6]  K. Durga Prasad,et al.  Performance of a small and low-cost chamber to simulate lunar surface environment , 2013 .

[7]  Clément Gosselin,et al.  Large-scale 3D printing with a cable-suspended robot , 2015 .

[8]  Liang Xiong,et al.  Technical characteristics of the relay communication satellite “Queqiao” for Chang’e-4 lunar farside exploration mission , 2019 .

[9]  Miroslaw J. Skibniewski,et al.  Visibility graph analysis on time series of shield tunneling parameters based on complex network theory , 2019, Tunnelling and Underground Space Technology.

[10]  Albert P.C. Chan,et al.  Critical review of studies on building information modeling (BIM) in project management , 2018 .

[11]  Clark R. Chapman,et al.  Imaging of Venus from Galileo: Early results and camera performance , 1992 .

[12]  Hanbin Luo,et al.  Cyber-physical-system-based safety monitoring for blind hoisting with the internet of things: A case study , 2019, Automation in Construction.

[13]  Yuchuan Wang,et al.  3D printing: printing precision and application in food sector , 2017 .

[14]  Scott Howe,et al.  Faxing Structures to the Moon: Freeform Additive Construction System (FACS) , 2013 .

[15]  Lim Chot Hun,et al.  6-DOF PC-Based Robotic Arm (PC-ROBOARM) with efficient trajectory planning and speed control , 2011, 2011 4th International Conference on Mechatronics (ICOM).

[16]  Jennifer Edmunson,et al.  Functional Comparison of Lunar Regoliths and Their Simulants , 2013 .

[17]  Stein Sture,et al.  Design and Construction of Shielded Lunar Outpost , 1994 .

[18]  Jun-feng Zhang,et al.  Mechanical Properties of QH-E Lunar Soil Simulant at Low Confining Stresses , 2016 .

[19]  Zongyu Yue,et al.  NAO-1: Lunar Highland Soil Simulant Developed in China , 2009 .

[20]  B. Khoshnevis,et al.  Contour Crafting Simulation Plan for Lunar Settlement Infrastructure Build-Up , 2012 .

[21]  Sangah Lee,et al.  Feasibility Study on Lunar Concrete Landing Pad , 2012 .

[22]  J. Gosau.  Regolith Stabilization and Building Materials for the Lunar Surface , 2012 .

[23]  Chang-Soo Han,et al.  Feasibility verification of brick-laying robot using manipulation trajectory and the laying pattern optimization , 2009 .

[24]  Xiao Fugen.  Issues about Lunar Environment in Lunar Exploration Project , 2006 .

[25]  Radhika Nagpal,et al.  Designing Collective Behavior in a Termite-Inspired Robot Construction Team , 2014, Science.

[26]  C. Pilcher.  From a lunar outpost to Mars: science, policy and the U.S. Space Exploration Initiative. , 1992, Advances in space research : the official journal of the Committee on Space Research.

[27]  Lieyun Ding,et al.  Safety barrier warning system for underground construction sites using Internet-of-Things technologies , 2017 .

[28]  Tao Peng,et al.  Analysis of Energy Utilization in 3D Printing Processes , 2016 .

[29]  Thomas L. Billings,et al.  Lunar Lavatube Base Construction , 2000 .

[30]  Meng Meng,et al.  DEA and TOPSIS combination model for the construction scheduling of urban road projects , 2011, Proceedings 2011 International Conference on Transportation, Mechanical, and Electrical Engineering (TMEE).

[31]  Ali Khademhosseini,et al.  3D biofabrication strategies for tissue engineering and regenerative medicine. , 2014, Annual review of biomedical engineering.

[32]  T. D. Lin,et al.  Concrete Lunar Base Investigation , 1988 .

[33]  Stig Moberg,et al.  Robust Control Of A Flexible Manipulator Arm : A Benchmark Problem , 2005 .

[34]  John F. Lewis,et al.  A Comparison of the Apollo and Early Orion Environmental Control, Life Support and Active Thermal Control System’s Driving Requirements and System Mass , 2008 .

[35]  Alexey Kondyurin,et al.  Polymerisation of composite materials in space environment for development of a Moon base , 2006 .

[36]  K. Bagi,et al.  Analysis of a Lunar Base Structure Using the Discrete-Element Method , 2011 .

[37]  B. Harvey.  Soviet and Russian Lunar Exploration , 2006 .

[38]  Valentina Colla,et al.  Building components for an outpost on the Lunar soil by means of a novel 3D printing technology , 2014 .

[39]  P. Hintze,et al.  Additive Construction using Basalt Regolith Fines , 2015 .