Characterization of a friction-stir-welded aluminum alloy 6013

The aluminum alloy 6013 was friction-stir welded in the T4 and the T6 temper, and the microstructure and mechanical properties were studied after welding and after applying a postweld heat treatment (PWHT) to the T4 condition. Optical microscopy (OM), transmission electron microscopy (TEM), and texture measurements revealed that the elongated pancake microstructure of the base material (BM) was transformed into a dynamically recrystallized microstructure of considerably smaller grain size in the weld nugget. Strengthening precipitates, present before welding in the T6 state, were dissolved during welding in the nugget, while an overaged state with much larger precipitate size was established in the heat-affected zone (HAZ). Microhardness measurements and tensile tests showed that the HAZ is the weakest region of the weld. The welded sheet exhibited reduced strength and ductility as compared to the BM. A PWHT restored some of the strength to the as-welded condition.

[1]  Hiroyuki Kokawa,et al.  Microstructural evolution of 6063 aluminum during friction-stir welding , 1999 .

[2]  L. F. Mondolfo.  Aluminum alloys: Structure and properties , 1976 .

[3]  R. Braun,et al.  Mikrostrukturelle, mechanische und korrosive Eigenschaften reibrührgeschweißter Stumpfnähte in Aluminiumlegierungen , 1998 .

[4]  Kumar V. Jata,et al.  Friction-stir welding effects on microstructure and fatigue of aluminum alloy 7050-T7451 , 2000 .

[5]  S. Saimoto,et al.  Microstructure of Friction Stir Welded Joints in AA5182 , 2000 .

[6]  Anthony P. Reynolds,et al.  Processing-Property Correlation in Friction Stir Welds , 2000 .

[7]  G. A. Edwards,et al.  The precipitation sequence in Al–Mg–Si alloys , 1998 .

[8]  Lawrence E Murr,et al.  Microstructural aspects of the friction-stir welding of 6061-T6 aluminum , 1997 .

[9]  L. Murr,et al.  Solid-state flow visualization in the friction-stir welding of 2024 Al to 6061 Al , 1999 .

[10]  P. Buffat,et al.  Transmission electron microscopy study of the β′ phase (Al–Mg–Si alloys) and QC phase (Al–Cu–Mg–Si alloys): ordering mechanism and crystallographic structure , 2000 .

[11]  P. Prangnell,et al.  High Resolution EBSD Analysis of the Grain Structure in an AA2024 Friction Stir Weld , 2000 .

[12]  L. Murr,et al.  Flow visualization and residual microstructures associated with the friction-stir welding of 2024 aluminum to 6061 aluminum , 1999 .

[13]  H. W. Zandbergen,et al.  The crystal structure of the β′ phase in Al–Mg–Si alloys , 1998 .

[14]  Murray W. Mahoney,et al.  Effects of friction stir welding on microstructure of 7075 aluminum , 1997 .

[15]  M. W. Mahoney,et al.  Properties of friction-stir-welded 7075 T651 aluminum , 1998 .

[16]  Lawrence E Murr,et al.  Microstructural issues in a friction-stir-welded aluminum alloy , 1998 .

[17]  E. Schofer.  Rührreibschweißen – Wärmearmes Verbinden von Aluminiumlegierungen , 1999 .

[18]  M. E. Kassner,et al.  The Classification and Determination of Restoration Mechanisms in the Hot Working of Al Alloys , 1991 .

[19]  A. Bowen.  Texture development in high strength aluminium alloys , 1990 .

[20]  Mitsuhiro Murayama,et al.  PRE-PRECIPITATE CLUSTERS AND PRECIPITATION PROCESSES IN Al-Mg-Si ALLOYS , 1999 .

[21]  F. J. Humphreys,et al.  Recrystallization and Related Annealing Phenomena , 1995 .

[22]  K. H. Rendigs.  Aluminium Structures Used in Aerospace - Status and Prospects- , 1997 .

[23]  K. Matsuda,et al.  High-resolution electron microscopy on the structure of Guinier-Preston zones in an Al-1.6 mass Pct Mg2Si alloy , 1998 .

[24]  D. Lloyd,et al.  Precipitation in aluminum alloys AA6111 and AA6016 , 1999 .

[25]  M. E. Kassner,et al.  Current issues in recrystallization: a review , 1997 .

[26]  Jürgen Hirsch,et al.  Overview no. 76: Mechanism of deformation and development of rolling textures in polycrystalline f.c.c. metals—I. Description of rolling texture development in homogeneous CuZn alloys , 1988 .

[27]  K. Jata,et al.  Friction Stir Welding of High Strength Aluminum Alloys , 2000 .

[28]  F. Montheillet,et al.  Recrystallization during Hot Deformation of Aluminium , 1996 .

[29]  Ian J. Polmear,et al.  Light Alloys: Metallurgy of the Light Metals , 1982 .