Finite element modeling of shear in thin walled beams with a single warping function

The considerable progress in the research and development of thin-walled beam structures responds to their growing use in engineering construction and to their increased need for efficiency in strength and cost. The result is a structure that exhibits large shear strains and important non uniform warping under different loadings, such as non uniform torsion, shear bending and distortion...A unified approach is formulated in this thesis for 3D thin walled beam structures with arbitrary profile geometries, loading cases and boundary conditions. A single warping function, defined by a linear combination of longitudinal displacements at cross sectional nodes (derived from Prokic work), is enhanced and adapted in order to qualitatively and quantitatively reflect and capture the nature of a widest possible range of behaviors. Constraints are prescribed at the kinematics level in order to enable the study of arbitrary cross sections for general loading. This approach, differing from most published theories, has the advantage of enabling the study of arbitrary cross sections (closed/opened or mixed) without any restrictions or distinctions related to the geometry of the profile. It generates automatic data and characteristic computations from a kinematical discretization prescribed by the profile geometry. The amount of shear bending, torsional and distortional warping and the magnitude of the shear correction factor is computed for arbitrary profile geometries with this single formulation.The proposed formulation is compared to existing theories with respect to the main assumptions and restrictions. The variation of the location of the torsional center, distortional centers and distortional rotational ratio of a profile is discussed in terms of their dependency on the loading cases and on the boundary conditions.A 3D beam finite element model is developed and validated with several numerical applications. The displacements, rotations, amount of warping, normal and shear stresses are compared with reference solutions for general loading cases involving stretching, bending, torsion and/or distortion. Some examples concern the case of beam assemblies with different shaped profiles where the connection type determines the nature of the warping transmission. Other analyses –for which the straightness assumption of Timoshenko theory is relaxed– investigate shear deformation effects on the deflection of short and thin beams by varying the aspect ratio of the beam. Further applications identify the cross sectional distortion and highlight the importance of the distortion on the stresses when compared to bending and torsion even in simple loading cases. Finally, a non linear finite element based on the updated lagrangian formulation is developed by including torsional warping degrees of freedom. An incremental iterative method using the arc length and the Newton-Raphson methods is used to solve the non linear problem. Examples are given to study the flexural, torsional, flexural torsional and lateral torsional buckling problems for which a coupling between the variables describing the flexural and the torsional degrees of freedom occurs. The finite element results are compared to analytical solutions based on different warping functions and commonly used in linear stability for elastic structures having insufficient lateral or torsional stiffnesses that cause an out of plane buckling.

[1]  Luo Yunhua,et al.  Explanation and elimination of shear locking and membrane locking with field consistence approach , 1998 .

[2]  Mo Shing Cheung,et al.  Finite Strip Analysis of Bridges , 1996 .

[3]  A. Prokić.  New Warping Function for Thin-Walled Beams. I: Theory , 1996 .

[4]  Mark A. Bradford.  Lateral-Distortional buckling of steel I—Section members , 1992 .

[5]  A. Gjelsvik,et al.  The Theory of Thin-Walled Bars , 1981 .

[6]  Noel W. Murray,et al.  Introduction to the theory of thin-walled structures , 1984 .

[7]  J. L. Meek,et al.  A simple finite element model for the warping torsion problem , 1983 .

[8]  Robert J. Reilly.  Stiffness Analysis of Grids Including Warping , 1972 .

[9]  A. Ghani Razaqpur,et al.  Thin‐Walled Multicell Box‐Girder Finite Element , 1991 .

[10]  K. Bathe,et al.  FINITE ELEMENT FORMULATIONS FOR LARGE DEFORMATION DYNAMIC ANALYSIS , 1975 .

[11]  P. W. Sharman,et al.  Analysis of structures with thin-walled open sections , 1985 .

[12]  C. Cichon,et al.  Stability of structures by finite element methods , 1994 .

[13]  S. Ghosh,et al.  Theory of thin walled bars: Atle Gjelsvik, Wiley-Interscience, New York, 1981. ISBN 0-471-08594-4, ix + 248 pages, illustrated, hard cover £22.00 , 1982 .

[14]  Z. Bažant,et al.  Stability of Structures: Elastic, Inelastic, Fracture, and Damage Theories , 1993 .

[15]  H. Shakourzadeh,et al.  A torsion bending element for thin-walled beams with open and closed cross sections , 1995 .

[16]  S. L. Chan,et al.  Simplified models for analysis and design of modular falsework , 1998 .

[17]  Kuo Mo Hsiao,et al.  A co-rotational formulation for thin-walled beams with monosymmetric open section , 2000 .

[18]  Gregory J. Hancock.  LOCAL DISTORTIONAL AND LATERAL BUCKLING OF I-BEAMS , 1978 .

[19]  Oren Vilnay,et al.  On the prediction of geometrical non‐linearity of slender structures , 2001 .

[20]  Moon-Young Kim,et al.  Improved formulation for spatial stability and free vibration of thin-walled tapered beams and space frames , 2000 .

[21]  A. Prokić.  Thin-walled beams with open and closed cross-sections , 1993 .

[22]  Jean-Louis Batoz,et al.  Modeling of connections in the analyses of thin-walled space frames , 1999 .

[23]  Bogdan I. Epureanu,et al.  Study of warping torsion of thin‐walled beams with closed cross‐section using macro‐elements , 1996 .

[24]  On the capacity of the isoparametric quadratic beam element to solve accurately a uniformly loaded beam segment , 1984 .

[25]  W. F. Chen,et al.  Stability analysis of semirigid steel scaffolding , 1995 .

[26]  Young Bong Kwon,et al.  Strength tests of cold-formed channel sections undergoing local and distortional buckling , 1991 .

[27]  V. Vlasov.  Thin-walled elastic beams , 1961 .

[28]  Preben Terndrup Pedersen.  Beam theories for torsional-bending response of ship hulls , 1991 .

[29]  G. Dhatt,et al.  Modélisation des structures par éléments finis , 1990 .

[30]  Yvan Galéa,et al.  Déversement élastique d'un poutre à section bi-symétrique soumise à des moments d'extrémité et une charge répartie ou concentrée , 2002 .

[31]  Qiang Xue,et al.  A study on the instability problem for 3D frames , 1998 .

[32]  Teoman T Peköz,et al.  The finite element method for thin-walled members—basic principles , 2003 .

[33]  Hyo-Gyoung Kwak,et al.  Effect of warping in geometric nonlinear analysis of spatial beams , 2001 .

[34]  Mark A. Bradford,et al.  A rational model for the distortional buckling of tapered members , 1996 .

[35]  Aura Conci,et al.  Large displacement analysis of thin-walled beams with generic open section , 1992 .

[36]  H. Djalaly.  CALCUL DE LA RESISTANCE ULTIME AU DEVERSEMENT. , 1974 .

[37]  Mark A. Bradford,et al.  Lateral-distortional buckling of continuously restrained columns , 1997 .

[38]  J. Mottershead.  Warping torsion in thin‐walled open section beams using the semiloof beam element , 1988 .

[39]  Nicholas S. Trahair,et al.  Flexural-Torsional Buckling of Structures , 1993 .

[40]  Dinar Camotim,et al.  Distortional buckling formulae for cold-formed steel C- and Z-section members: Part II—Validation and application , 2004 .

[41]  George E. Blandford,et al.  Closure of "Thin-Walled Space Frames. I: Large-Deformation Analysis Theory" , 1991 .

[42]  Teoman Peköz,et al.  Bending strength of standing seam roof panels , 1997 .

[43]  Nicholas S. Trahair,et al.  Buckling of monosymmetric I beams under moment gradient , 1986 .

[44]  Gregory J. Hancock,et al.  Finite Strip Buckling and Nonlinear Analyses and Distortional Buckling Analysis of Thin-Walled Structural Members , 1998 .

[45]  Sung Yong Back,et al.  A SHEAR-FLEXIBLE ELEMENT WITH WARPING FOR THIN-WALLED OPEN BEAMS , 1998 .

[46]  Tapered thin open section beams on elastic foundation—I. Buckling analysis , 1996 .

[47]  Mark A. Bradford,et al.  Elastic distortional buckling of continuous I-beams , 1997 .

[48]  T. Kármán.  Methods of Analysis for Torsion with Variable Twist , 1944 .

[49]  J. Michael Davies,et al.  Local and distortional buckling of thin-walled short columns , 1999 .

[50]  A. Prokić.  New Warping Function for Thin-Walled Beams. II: Finite Element Method and Applications , 1996 .

[51]  Ch. Massonnet.  A new approach (including shear lag) to elementary mechanics of materials , 1983 .

[52]  Mark A. Bradford,et al.  Nonlinear analysis of thin-walled members of variable cross-section: Part I. Theory , 2000 .

[53]  P. Terndrup Pedersen,et al.  A finite element formulation for beams with thin walled cross-sections , 1982 .

[54]  J. M. Davies,et al.  Recent research advances in cold-formed steel structures , 2000 .

[55]  J. Jensen.  On the shear coefficient in Timoshenko's beam theory , 1983 .

[56]  T. Kármán,et al.  Torsion with Variable Twist , 1946 .

[57]  K. Basler,et al.  TORSION - APPLICATION A L'ETUDE DES STRUCTURES , 1970 .

[58]  W. R. Dean.  On the Theory of Elastic Stability , 1925 .

[60]  F. Vodopivec,et al.  Locking-suppression techniques and their application to the FEM-analysis of processes of deformation of thin-walled objects , 1998 .

[61]  Dinar Camotim,et al.  GBT buckling analysis of pultruded FRP lipped channel members , 2003 .

[62]  S. L. Chan,et al.  Non-linear behavior and design of steel structures , 2001 .

[63]  Gregory J. Hancock.  Design for distortional buckling of flexural members , 1997 .

[64]  J. N. Reddy,et al.  Relationships between bending solutions of classical and shear deformation beam theories , 1997 .

[65]  Dinar Camotim,et al.  GBT local and global buckling analysis of aluminium and stainless steel columns , 2004 .

[66]  A. Prokić.  New finite element for analysis of shear lag , 2002 .

[67]  Bogdan I. Epureanu,et al.  Study of warping torsion of thin-walled beams with open cross-section using macro-elements , 1999 .

[68]  J. L. Meek,et al.  Large displacement analysis of space-frame structures , 1989 .

[69]  René Walther.  Traité de génie civil de l'Ecole polytechnique fédérale de Lausanne , 1989 .

[70]  Siu Lai Chan.  BUCKLING ANALYSIS OF STRUCTURES COMPOSED OF TAPERED MEMBERS , 1990 .

[71]  Mark A. Bradford.  Elastic distortional buckling of tee-section cantilevers , 1999 .

[72]  Bernard Espion,et al.  Non-uniform torsional behavior and stability of thin-walled elastic beams with arbitrary cross sections , 2004 .

[73]  Masao Mizuno,et al.  Distortion of Thin-Walled Open-Cross-Section Members : One-Degree-of-Freedom and Singly Symmetrical Cross-Sections , 1978 .

[74]  Mark A. Bradford,et al.  Distortional buckling of elastically restrained cantilevers , 1998 .

[75]  George E. Blandford,et al.  AC0 finite element formulation for thin-walled beams , 1989 .

[76]  Y. K. Cheung,et al.  Finite strip method , 1976 .

[77]  Mahen Mahendran,et al.  Flexural capacity of hollow flange beams , 2000 .

[78]  Mark A. Bradford,et al.  Non-linear analysis of thin-walled members of open cross-section , 1999 .

[79]  Sung-Pil Chang,et al.  Spatial postbuckling analysis of nonsymmetric thin-walled frames. II : Geometrically nonlinear Fe procedures , 2001 .

[80]  Moshe Eisenberger,et al.  An exact high order beam element , 2003 .

[81]  J. N. Reddy,et al.  Convergence properties and derivative extraction of the superconvergent Timoshenko beam finite element , 2001 .

[82]  A. Prokić.  Material Nonlinear Analysis of Thin‐Walled Beams , 1994 .

[83]  Gregory J. Hancock,et al.  Cold-formed steel structures , 2003 .

[84]  Nicholas S. Trahair,et al.  Elastic Behavior of Tapered Monosymmetric I-Beams , 1975 .

[85]  Dinar Camotim,et al.  Second-order generalised beam theory for arbitrary orthotropic materials , 2002 .

[86]  J. C. Roth,et al.  Theoretical and numerical stability analyses of unrestrained, mono-symmetric thin-walled beams , 2003 .

[87]  Dusan Krajcinovic.  Matrix Force Analysis of Thin-Walled Structures , 1970 .

[88]  Dinar Camotim,et al.  Distortional buckling formulae for cold-formed steel C and Z-section members: Part I—derivation , 2004 .