Advances in Horizontal Axis Wind Turbine Blade Designs: Introduction of Slots and Tubercle

Despite being harvested thousands of years ago, wind energy was neglected during the industrial revolution because of the strong dependence on fossil fuels. However, after the alarming decrease in the fossil fuels reserves, many have drawn their attentions back to a renewable energy technology, especially the wind energy. This paper presents some of the new designs that are being tested, including slotted blades and tubercles design models. The experimental results are used to validate the numerical studies that are being conducted parallel to the experiments for better understanding and more detailed results. The new slotted blade design produced more power compared to the straight blade for lower wind speeds, while the tubercle blades showed better power performance in severe wind conditions and a more steady behavior under unsteady and higher wind velocities.

[1]  Fei-Bin Hsiao,et al.  Aerodynamic Investigations of Low-Aspect-Ratio Thin Plate Wings at Low Reynolds Numbers , 2012 .

[2]  Jorge C. S. André,et al.  Wind tunnel testing of a horizontal axis wind turbine rotor and comparison with simulations from two Blade Element Momentum codes , 2013 .

[3]  Aaron Altman,et al.  Wind tunnel blockage corrections: Review and application to Savonius vertical-axis wind turbines , 2011 .

[4]  Ryoichi S. Amano,et al.  Design of Experimental Procedure and Analysis Methods of Small Scale Wind Turbine Blades With Different Geometries , 2014 .

[5]  Yan Li,et al.  A wind tunnel experimental study of icing on wind turbine blade airfoil , 2012 .

[6]  A. Betz Introduction to the Theory of Flow Machines , 1966 .

[7]  Ilya Avdeev,et al.  Power, structural and noise performance tests on different wind turbine rotor blade designs , 2013 .

[8]  Jong-Soo Choi,et al.  A full-scale prediction method for wind turbine rotor noise by using wind tunnel test data , 2012 .

[9]  Ryoichi S. Amano,et al.  Design and Analysis of Wind Turbine Blades: Winglet, Tubercle, and Slotted , 2013 .

[10]  John Kaiser Calautit,et al.  A validated design methodology for a closed-loop subsonic wind tunnel , 2014 .

[11]  Ryoichi S. Amano,et al.  Wind Turbine Blade Design and Analysis With Tubercle Technology , 2012 .

[12]  Hiroyuki Hirahara,et al.  Testing basic performance of a very small wind turbine designed for multi-purposes , 2005 .

[13]  Filippo Campagnolo,et al.  Wind tunnel testing of scaled wind turbine models: Beyond aerodynamics , 2014 .