Effects of melt flow on the primary dendrite spacing of Pb–Sn binary alloy during directional solidification

Abstract The influences of melt flow generated by traveling magnetic fields (TMFs) on dendrite growth during the upward-directional solidification of Pb–33 wt% Sn binary alloy were investigated under the condition of 1× g gravity. When the direction of the TMF was changed from upward to downward, the primary dendrite spacing gradually increased, and the peak of distribution of the primary dendrite spacing shifted to the narrower values. This was caused by the different intensities of melt flow, which was controlled by TMFs. The effects of TMFs on melt flow were similar to those of adjustments in gravity levels; thus, the primary dendrite spacing varied. The effective gravity acceleration, which was used to modulate melt flow, decreased for downward-TMFs and increased for upward-TMFs. As the drawing speed increased, the modulated flow showed more significant influences on primary dendrites spacing.

[1]  H. Iwasaki,et al.  Effect of solute convection on the primary arm spacings of Pb–Sn binary alloys during upward directional solidification , 1999 .

[2]  Dominique Bouchard,et al.  Prediction of dendrite arm spacings in unsteady-and steady-state heat flow of unidirectionally solidified binary alloys , 1997 .

[3]  I. Steinbach.  Pattern formation in constrained dendritic growth with solutal buoyancy , 2009 .

[4]  R. Grugel,et al.  The effect of the traveling magnetic field (TMF) on the buoyancy-induced convection in the vertical bridgman growth of semiconductors , 2004 .

[5]  S. Tewari,et al.  Break-down of a planar liquid-solid interface during directional solidification; influence of convection , 1992 .

[6]  J. Hunt,et al.  Numerical modeling of cellular/dendritic array growth: spacing and structure predictions , 1996 .

[7]  D. Stefanescu,et al.  Dendritic solidification of alloys in low gravity , 1988, Metallurgical and Materials Transactions A.

[8]  S. Tewari,et al.  Macrosegregation during dendritic arrayed growth of hypoeutectic pb- sn alloys: Influence of primary arm spacing and mushy zone length , 1996 .

[9]  K. Mazuruk.  Control of Melt Convection Using Traveling Magnetic Fields , 2002 .

[10]  L. Liu,et al.  Microstructure and stress rupture properties of single crystal superalloy CMSX-2 under high thermal gradient directional solidification , 2007 .

[11]  Amauri Garcia,et al.  Influence of melt convection on dendritic spacings of downward unsteady-state directionally solidified Al-Cu alloys , 2004 .

[12]  Wilfried Kurz,et al.  Solidification microstructures: A conceptual approach , 1994 .

[13]  P. Rudolph.  Travelling magnetic fields applied to bulk crystal growth from the melt: The step from basic research to industrial scale , 2008 .

[14]  Xiaohua Liu,et al.  Solute redistribution during the accelerated crucible rotation Bridgman growth of Hg1−xMnxTe , 1999 .

[15]  Hirofumi Miyahara,et al.  Directional solidification microstructures in diffusive and convective regimes , 2001 .

[16]  L. Ratke,et al.  The effect of rotating magnetic fields on the microstructure of directionally solidified Al-Si-Mg alloys , 2005 .

[17]  R. Moreau,et al.  Control of melt convection by a travelling magnetic field during the directional solidification of Al–Ni alloys , 2007 .