Numerical simulation of the failure process of unreinforced masonry walls due to concentrated static and dynamic loading

[1]  Hongyuan Liu,et al.  Numerical simulation of the rock fragmentation process induced by two drill bits subjected to static and dynamic (impact) loading , 2011 .

[2]  Gabriele Milani,et al.  Homogenized rigid-plastic model for masonry walls subjected to impact , 2009 .

[3]  S. Pietruszczak,et al.  Numerical analysis of structural masonry: mesoscale approach , 2008 .

[4]  G. Beattie,et al.  The performance of unreinforced masonry walls subjected to low-velocity impacts: Finite element analysis , 2007 .

[5]  L. G. Tham,et al.  A numerical study of the influence of heterogeneity on the strength characterization of rock under uniaxial tension , 2007 .

[6]  Chun’an Tang,et al.  Analysis of the shear failure process of masonry by means of a meso-scopic mechanical modeling approach , 2006 .

[7]  Paulo B. Lourenço,et al.  Masonry compression: a numerical investigation at the meso‐level , 2006 .

[8]  C. A. Tang,et al.  Numerical simulation of Brazilian disk rock failure under static and dynamic loading , 2006 .

[9]  Joseph P. Morris,et al.  Simulations of Fracture and Fragmentation of Geologic Materials using Combined FEM/DEM Analysis , 2005 .

[10]  Thierry Massart,et al.  Mesoscopic modeling of failure in brick masonry accounting for three-dimensional effects , 2005 .

[11]  Chun’an Tang,et al.  Numerical study on the influence of mesomechanical properties on macroscopic fracture of concrete , 2005 .

[12]  Rhj Ron Peerlings,et al.  Mesoscopic modeling of failure and damage-induced anisotropy in brick masonry , 2004 .

[13]  C. A. Tang,et al.  MESOMECHANICAL MODEL FOR CONCRETE. PART I: MODEL DEVELOPMENT , 2004 .

[14]  Davide Bigoni,et al.  Yield criteria for quasibrittle and frictional materials , 2004, 1010.1823.

[15]  K. T. Chau,et al.  Numerical Simulations of Failure of Brittle Solids under Dynamic Impact Using a New Computer Program - DIFAR , 2004 .

[16]  Chun’an Tang,et al.  NUMERICAL SIMULATION ON SHEAR FRACTURE PROCESS OF CONCRETE USING MESOSCOPIC MECHANICAL MODEL , 2002 .

[17]  M. Gilbert,et al.  The performance of unreinforced masonry walls subjected to low-velocity impacts: experiments , 2002 .

[18]  Nicola Luigi Rizzi,et al.  Heterogeneous elastic solids: a mixed homogenization-rigidification technique , 2001 .

[19]  Jian Zhao,et al.  Applicability of Mohr–Coulomb and Hoek–Brown strength criteria to the dynamic strength of brittle rock , 2000 .

[20]  Leslie George Tham,et al.  Numerical studies of the influence of microstructure on rock failure in uniaxial compression — Part I: effect of heterogeneity , 2000 .

[21]  Manuel Elices,et al.  Micromechanical modeling of brick-masonry fracture , 2000 .

[22]  Jaroslav Mackerle,et al.  Finite element linear and nonlinear, static and dynamic analysis of structural elements – an addendum – A bibliography (1996‐1999) , 2000 .

[23]  Shaoquan Kou,et al.  Crack propagation and coalescence in brittle materials under compression , 1998 .

[24]  Peter K. Kaiser,et al.  Numerical simulation of cumulative damage and seismic energy release during brittle rock failure-Part I: Fundamentals , 1998 .

[25]  P. Lourenço,et al.  Multisurface Interface Model for Analysis of Masonry Structures , 1997 .

[26]  A. Anthoine.  HOMOGENIZATION OF PERIODIC MASONRY: PLANE STRESS, GENERALIZED PLANE STRAIN OR 3D MODELLING? , 1997 .

[27]  C. Tang,et al.  Numerical simulation of progressive rock failure and associated seismicity , 1997 .

[28]  P. Lourenço.  Computational strategies for masonry structures : Proefschrift , 1996 .

[29]  J. R. Riddington,et al.  Finite element prediction of masonry compressive strength , 1994 .

[30]  Joseph W. Tedesco,et al.  Numerical analysis of high strain rate splitting-tensile tests , 1993 .

[31]  A. Kobayashi,et al.  Strain-rate sensitivity of concrete mechanical properties , 1992 .

[32]  Joseph W. Tedesco,et al.  Split-Hopkinson Pressure-Bar tests on Concrete and Mortar in Tension and Compression , 1989 .

[33]  Adrian Page,et al.  Finite Element Model for Masonry Subjected to Concentrated Loads , 1988 .

[34]  Adrian Page,et al.  Biaxial Stress‐strain Relations for Brick Masonry , 1985 .

[35]  Saky Rosenhaupt,et al.  Masonry Walls on Continuous Beams , 1965 .

[36]  Jaroslav Mackerle,et al.  Finite element modelling and simulation of indentation testing: a bibliography (1990‐2002) , 2004 .

[37]  Nicola Pugno,et al.  A fractal approach for damage detection in concrete and masonry structures by the acoustic emission technique , 2004 .

[38]  J. W. Tedesco,et al.  Effects of Strain Rate on Concrete Strength , 1995 .

[39]  Zdenek P. Bazant,et al.  Softening Reversal and Other Effects of a Change in Loading Rate on Fracture of Concrete , 1995 .

[40]  Joseph W. Tedesco,et al.  Numerical analysis of high strain rate concrete direct tension tests , 1991 .

[41]  P. B. Shing,et al.  An appraisal of smeared crack models for masonry shear wall analysis , 1991 .

[42]  J. Middleton,et al.  Equivalent elastic moduli for brick masonry , 1989 .

[43]  Joseph W. Tedesco,et al.  Numerical analysis of dynamic split cylinder tests , 1989 .

[44]  Paulo J.M. Monteiro,et al.  Continuum Damage of Cement Paste and Mortar as Affected by Porosity and Sand Concentration , 1989 .

[45]  W. Weibull.  A Statistical Distribution Function of Wide Applicability , 1951 .

[46]  P. Lourenço,et al.  An Anisotropic Failure Criterion for Masonry Suitable for Numerical Implementation , 2022 .