Impact of Sample Geometry and Surface Finish on VM12-SHC Ferritic–Martensitic Steel Under Cyclic Steam Atmosphere Operating Conditions

[1]  C. Schroer,et al.  Effect of Structural State and Surface Finishing on Corrosion Behavior of 1.4970 Austenitic Steel at 400 and 500 °C in Flowing Pb-Bi Eutectic With Dissolved Oxygen , 2018, Journal of Nuclear Engineering and Radiation Science.

[2]  R. Chassagnon,et al.  Effect of surface finishing on the oxidation behaviour of a ferritic stainless steel , 2017 .

[3]  Ursula Faber,et al.  Protective Oxide Scales And Their Breakdown , 2016 .

[4]  Fu-hui Wang,et al.  The Effect of Surface Finish on the Scaling Behavior of Stainless Steel in Steam and Supercritical Water , 2013, Oxidation of Metals.

[5]  S. Guillou,et al.  Study of Conductivity of K41X Chromia Forming Alloy in High Temperature Electrolysis Environment , 2013, Oxidation of Metals.

[6]  M. Lukaszewicz.  Steam oxidation of advanced high temperature resistant alloys for ultra-supercritical applications , 2012 .

[7]  E. Andrieu,et al.  Effect of surface preparation on the corrosion of austenitic stainless steel 304L in high temperature steam and simulated PWR primary water , 2012 .

[8]  L. Singheiser,et al.  Temperature dependence of oxide scale formation on high-Cr ferritic steels in Ar–H2–H2O , 2011 .

[9]  A. Galerie,et al.  Influence of Polishing-Induced Surface Hardening on the Adhesion of Oxide Scales Grown on a Ferritic Stainless Steel , 2011 .

[10]  D. Young,et al.  Temperature and water vapour effects on the cyclic oxidation behaviour of Fe–Cr alloys , 2010 .

[11]  W. Quadakkers,et al.  Oxidation in Steam and Steam/Hydrogen Environments , 2010 .

[12]  Y. Liu.  Performance evaluation of several commercial alloys in a reducing environment , 2008 .

[13]  G. Holcomb.  Calculation of Reactive-evaporation Rates of Chromia , 2008 .

[14]  W. Quadakkers,et al.  The Effect of Water Vapor on Selective Oxidation of Fe–Cr Alloys , 2008 .

[15]  W. J. Quadakkers,et al.  Implications of steam oxidation for the service life of high-strength martensitic steel components in high-temperature plant , 2007 .

[16]  H. Grabke,et al.  Initial Oxidation of a 9%CrMo‐ and a 12%CrMoV‐Steel , 2004 .

[17]  H. Grabke,et al.  Influence of chromium diffusion and different surface finishes on the oxidation behaviour of chromium steels , 2000 .