Simulation and analysis of isothermal forging of AA6063 obtained from material processed by equal channel angular pressing severe plastic deformation
暂无分享,去创建一个
Javier León | Rodrigo Luri | C. J. Luis | D. Salcedo | J. P. Fuertes | Ignacio Puertas | I. Puertas | C. Luis | R. Luri | D. Salcedo | J. Leon
[1] J. C. Werenskiold,et al. Dynamic precipitation during severe plastic deformation of an Al–Mg–Si aluminium alloy , 2008 .
[2] F. J. Humphreys,et al. Recrystallization and Related Annealing Phenomena , 1995 .
[3] J. P. Fuertes,et al. Isothermal Upset Forging of AA5083 after Severe Plastic Deformation by ECAE , 2013 .
[4] R Luri,et al. Analysis and modelling by finite element method of the equal channel angular extrusion pressure , 2010 .
[5] Akhtar S. Khan,et al. Thermo-mechanical response of Al 6061 with and without equal channel angular pressing (ECAP) , 2010 .
[6] Y. Totik,et al. The effects of artificial aging on wear properties of AA 6063 alloy , 2003 .
[7] R. Srinivasan,et al. Scaling up of equal-channel angular pressing and its effect on mechanical properties, microstructure, and hot workability of AA 6061 , 2005 .
[8] P. Venugopal,et al. Analysis of forming loads, microstructure development and mechanical property evolution during equal channel angular extrusion of a commercial grade aluminum alloy , 2003 .
[9] H. Vehoff,et al. Plastic deformation mechanism of ultra-fine-grained AA6063 processed by equal-channel angular pressing , 2010 .
[10] J. P. Fuertes,et al. Experimental and FEM Analysis of the AA 6082 Processed by Equal Channel Angular Extrusion , 2011 .
[11] W. Kim,et al. Plastic forming of the equal-channel angular pressing processed 6061 aluminum alloy , 2008 .
[12] S. Hamamda,et al. Effect of pre-aging and maturing on the precipitation hardening of an Al–Mg–Si alloy , 2010 .
[13] H. Abdullah,et al. Influence of aging parameters on the mechanical properties of 6063 aluminium alloy , 2000 .
[14] Javier León,et al. Manufacturing of Nanostructured Blades for a Francis Turbine by Isothermal Forging of AA6063 , 2014 .
[15] S. Swaddiwudhipong,et al. Improved algorithm for material characterization by simulated indentation tests , 2006 .
[16] S. Hamamda,et al. Pre-Aging and Maturing Effects on the Precipitation Hardening of an Al-Mg-Si Alloy , 2010 .
[17] H. Suzuki,et al. Development of the continuous shear deformation process , 2001 .
[18] I. Pérez,et al. Análisis de la influencia del tratamiento térmico de envejecimiento en la modificación de las propiedades mecánicas de la aleación AA6060 procesada por ECAE , 2011 .
[19] V. Segal,et al. Engineering and commercialization of equal channel angular extrusion (ECAE) , 2004 .
[20] C. Pezeshki,et al. A novel structural-based approach to model the age hardening behaviour of aluminium alloys , 2006 .
[21] Chun-ming Liu,et al. Effects of different tempers on precipitation hardening of 6000 series aluminium alloys , 2007 .
[22] Dong-Yol Yang,et al. Novel forging technology of a magnesium alloy impeller with twisted blades of micro-thickness , 2008 .
[23] E. Cerri,et al. FEM and metallurgical analysis of modified 6082 aluminium alloys processed by multipass ECAP: Influence of material properties and different process settings on induced plastic strain , 2009 .
[24] K. P. N. Murthy,et al. Constitutive flow behaviour of austenitic stainless steels under hot deformation: artificial neural network modelling to understand, evaluate and predict , 2006 .
[25] C. Chang,et al. Influence of grain size and temperature on micro upsetting of copper , 2012 .